• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.72-75
• /
• 2001

The persistent current mode operation of HTS coils is one of the key technologies required for very high-field MRI magnets composed of LTS and HTS coils. But to date, the fabrication of persistent current mode system using HTS is not investigated well. In this paper, we fabricated the magnet and PCS using by BSCCO-2223 tape and jointed them with solder. The current decay behavior of the circuit was measured in liquid nitrogen by monitoring the magnetic field in the centre of magnet with a Hall sensor. To enhance the characteristic of persistent current mode system, superconducting joint method should be investigated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.181-184
• /
• 2004

The green emitting phosphor, $ZnGa_2O_4:Mn$ thin film with spinel structure were deposited by rf magnetron sputtering. Thin film phosphors were heat-treated in nitrogen, vacuum and air atmosphere, respectively. The effects of the substrates, heat-treatment conditions and the sputtering parameters were investigated. The growing behavior and luminescent properties of thin films depend on the crystallinity of the substrates. The Ga/Zn atomic ratios and luminescent characteristics were dependent on the annealing conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.529-532
• /
• 2002

In coflow jets with relatively large size nozzle and low fuel jet velocity, the buoyancy effect arises from the density difference between fuel and air streams. The present study investigated the behavior of such a buoyant cold Jet both numerically and experimentally, especially when the fuel stream has higher density than air. It has been demonstrated that the cold jet has a circular cone shape since upwardly injected fuel jet decelerates and forms a stagnation region, when the fuel jet was composed of propane highly diluted with nitrogen. When the fuel was moderately diluted, numerical results showed the Kelvin-Helmholtz type instability along the mixing layer of the jet. The stagnation height increases nonlihearly with fuel jet velocity with the power of approximately 1.64.

• Journal of Photoscience
• /
• 제6권2호
• /
• pp.61-65
• /
• 1999

The fluorescence properties and photoisomerization behavior of 1-(9-anthryl)-2-(n-quinolinyl)ethene (n-AQE, n=2-4) have been investigated in various solvents. t-3-AQE is strongly fluorescent, but does not accomplish photoisomerization, similar to parent hydrocarbon compound, t-1-(9-anthryl)-2-phenylethene (t-9-APE) or t-1-(9-anthryl)-2-(1-naphthyl)ethene (t-1-ANE). Fluorescence and photoisomerization oft-2-AQE and t-4-AQE are strongly affected by solvent polarity. Dependence of fluorescence quantum yield on the solvent polarity is moderate for t-2-AQE and large for t-4-AQE. In nonpolar solvent (in n-hexane), they exhibit relatively strong fluorescence, but do not isomerize to cis isomer on irradiation, even if inefficient isomerization is observed for t-4-AQE. However, as solvent polarity increases, their fluorescences become weak with efficient photoisomerization to corresponding cis isomer. Intramolecular charge-transfer excited state is presumed to contribute to photoisomerization. The S$_1$ decay parameters were found to be solvent-dependent due to the charge-transfer character of lowest S$_1$ state. In polar solvents, the activation barrier to twisting is reduced enhancing the isomerization of r-2-AQE and t-4-AQE in the singlet manifold.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.366-372
• /
• 1999

The deformation behavior of commercial stainless steels under hot rolling conditions was investigated by means of hot compression tests performed in the temperature range 800$^{\circ}C$ to 1200$^{\circ}C$. The measured flow stress-strain curves were analyzed by using a simple flow stress model. It was found that the reference strength of stainless steels are much higher than that of carbon steel and that nitrogen and molybdenum alloying greatly increases flow stress of austenitic stainless steel. Ferritic and duplex stainless steel showed comparatively low flow stresses. The flow stress model, which correlates the flow stress with temperature and strain rate, was applied to predict roll forces during hot-plate rolling of stainless steels.

• 한국진공학회지
• /
• 제7권4호
• /
• pp.314-319
• /
• 1998

반응성 스퍼터링 방법을 사용해서 SKD 61강 기판상에 TiN박막을 제조하였으며, 다 양한 증착조건의 변수에 따른 박막의 증착거동 및 제조된 박막의 물성을 평가하였다. 챔버 내의 가스압력 및 RF인가전압이 높을수록 증착속도는 급격하게 증가하였다. 반면에 혼합가 스의 질소함량이 높을수록 증착속도는 감소하였으며, 박막의 표면에 hillock이 발생하였다. 대표적인 증착조건으로 제조된 TiN박막의 경우(111) 우선배향성을 보였으며, 비교적 순수한 TiN의 화학양론비를 충족하는 박막임을 알 수 있었다.

• 한국연초학회지
• /
• 제6권2호
• /
• pp.131-139
• /
• 1984

The pyrolytic behavior of vanillin, a flavorant for manufactured cigarettes, was examined to find its contribution to the smoke composition. Vanillin was pyrolyzed at various temperatures (500-$900^{\circ}C$) in a stream of nitrogen. Pyrolytic products at $800^{\circ}C$ were identified with GC/MS. As increasing temperature, pyrolytic products did not appear with qualitative differences. Component analysis of the resulting products showed that 24 compounds were identified. and phenolic compounds were major products. The pyrolytic pathway of vanillin was also discussed.

• 한국진공학회지
• /
• 제1권1호
• /
• pp.206-211
• /
• 1992

SIMOX SOI structures were formed by oxygen ion implantation with a dose of 2 1018 ions/cm2 at 180kev and post-implantation annealing at $1250^{\circ}C$ for 6 hours in nitrogen ambient. The oxygen redistribution process during post-implantation annealing was examined by AES and TEM. The electrical property of the structure was investigated by SRP method. We could find oxygen precipitates in SOI layer was discussed. And the limiting factor to the decrease of the precipitates during post-implantation annealing was discussed also.

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.53-58
• /
• 2004

The preparation of responsive fibers from acrylic fibers is studied. Various responsive fibers, such as fibers which change their color on exposure to light or with change in temperature, have been developed and are used commercially However, the responsive material in these fibers are not the fiber itself but chemicals in microcapsules attached to the fibers by finishing, and few fibers exhibit responsive properties by itself. The partial hydrolysis of polyacrylonitrile fibers to obtain pH responsive fibers is presented in this paper. Partial hydrolysis was effected by control of the concentration of the sodium hydroxide used in the hydrolysis, hydrolysis temperature and time. The degree of hydrolysis was evaluated by nitrogen content of the hydrolyzed fibers and their response, change in length, to aqueous solutions of varying pH was studied by continually changing the pH. Significant changes in lengths with pH were observed and the gel transition behavior varied with the conditions of hydrolysis. The hysteresis of the length change was also studied to evaluate the possibilities of using hydrolyzed acrylic fibers as pH sensors.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권4호
• /
• pp.320-326
• /
• 1997

The stability of Bi-based superconducting wires cooled by a cryocooler was studied by considering the temperature dependency of critical current and electrical resistivity. The critical current measured in 23 K was about 7 times higher than that measured in liquid nitrogen of 77 K. The stability behavior of Bi based multifilament wires subjected to a thermal disturbance, which was simulated with a electric heater, was investigated by measuring the variation of voltage drop with time. Current sharing was occurred, and recovery to superconductivity was measured in the wire after removing heater power.