• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.49-52
• /
• 2003

The effects of nitrogen on the deformation behavior of duplex stainless steel have been studied The variation of strength was correlated with the characteristic microstructures. Analysis based on Hall-Petch relation confirmed that nitrogen enhances phase-boundary strengthening effect. The evolution of dislocation structure, slip traces, and misorientation distribution during deformation were also characterized to elucidate the effect of nitrogen on inelastic deformation mechanism.

• 소성∙가공
• /
• 제12권4호
• /
• pp.284-289
• /
• 2003

The effects of nitrogen on the deformation behavior of duplex stainless steel have been studied. The variation of strength was correlated with the characteristic microstructures pertaining to nitrogen. Analysis based on Hall-fetch relation confirmed that nitrogen enhances phase-boundary strengthening effect. The evolution of dislocation structure, slip traces and misorientation distribution during deformation were also characterized to elucidate the effect of nitrogen on inelastic deformation mechanism. It has been verified in this study that the higher nitrogen content provides a dual-phase microstructure with smaller strength difference between austenite and ferrite resulting into the earlier transfer of inelastic deformation from austenite to ferrite.

• 한국물환경학회지
• /
• 제26권1호
• /
• pp.71-80
• /
• 2010

We studied the nitrogen behavior and budget of Lake Paldang from March to December 2008. The particulate nitrogen (PN) concentrations ranged from 7 to 13% of the total nitrogen concentration (TN) in the stream inflows, the downstream outflow, and the lake water. The nitrate nitrogen ($NO_3-N$) concentration ranged from 67 to 78% of the TN. In the three rivers of Lake Paldang, Gyeongan River (In3 site) had the highest average of the TN, 5.037 mgN/L, but North Han River (In2 site) had the lowest average TN, 1.683 mgN/L. South Han River (In1 site) had the average TN of 2.399 mgN/L. In the dam discharge, TN showed the average 2.063 mgN/L. In the lake water, L4 site (Gyeongan River area) had the highest average TN, 3.781 mgN/L, but L3 site (North Han River) had the lowest average TN, 1.587 mgN/L. Total input of nitrogen loads to Lake Paldang was about 30,875 ton/year in 2008. Inflow rivers contributed 30,643 ton/year (South Han River: 18,111 ton/year (59%), North Han River: 11,333 ton/year (37%), and Gyeongan River: 1,199 ton/year (4%)). The atmospheric deposition had 135 ton/year, the nitrogen release from the bottom sediments had 88 ton/year, and macrophytes had 9 ton/year. Total output of nitrogen loads from Lake Paldang was about 31,256 ton/year. The downstream from dam contributed 29,877 ton/year, and the sediment deposition was 1,379 ton/year.

• 한국재료학회지
• /
• 제23권11호
• /
• pp.649-654
• /
• 2013

The effect of interstitial elements on the ductile-brittle transition behavior of austenitic Fe-18Cr-10Mn-2Ni alloys with different nitrogen and carbon contents was investigated in this study. All the alloys exhibited ductile-brittle transition behavior because of unusual low-temperature brittle fracture, even though they have a faced-centered cubic structure. With the same interstitial content, the combined addition of nitrogen and carbon, compared to the sole addition of nitrogen, improved the low-temperature toughness and thus decreased the ductile-brittle transition temperature (DBTT) because this combined addition effectively enhances the metallic component of the interatomic bonds and is accompanied by good plasticity and toughness due to the increased free electron concentration. The increase in carbon content or of the carbon-to-nitrogen ratio, however, could increase the DBTT since either of these causes the occurrence of intergranular fracture that lead to the deterioration of the toughness at low temperatures. The secondary ion mass spectroscopy analysis results for the observation of carbon and nitrogen distributions confirms that the carbon and nitrogen atoms were significantly segregated to the austenite grain boundaries and then caused grain boundary embrittlement. In order to successfully develop austenitic Fe-Cr-Mn alloys for low-temperature application, therefore, more systematic study is required to determine the optimum content and ratio of carbon and nitrogen in terms of free electron concentration and grain boundary embrittlement.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1998년도 특별강연 및 춘계학술발표 개요집
• /
• pp.126-130
• /
• 1998

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.568-569
• /
• 2006

The use of the nickel free, high nitrogen stainless steel powder and nitriding during sintering of iron based materials have been shown as an alternative way to the conventional PM stainless steels containing nickel. Nitrogen as an alloying element for iron improves in an effective way the properties of sintered alloyed steels. The powder metallurgy route is a suitable way to introduce nitrogen into these alloys and, in particular, to produce high nitrogen (close to the solubility limit) stainless steels. The paper presents and discusses the nitriding behavior of nickel-free stainless steels produced by powder metallurgy method. Alloyed melt was atomized by nitrogen and in this way nitrogen was introduced into the powder. Further nitriding occurred during sintering in a nitrogen atmosphere. For comparison, compacts having the same composition as an alloyed powder were produced from elemental powders mixture. Sintering-nitriding behaviour of investigated materials has been controlled by dilatometry, chemical and X-Ray phase analysis and metallography. Mechanical properties of sintered compacts were also measured.

• 유기물자원화
• /
• 제8권3호
• /
• pp.81-88
• /
• 2000

음식쓰레기, 슬러지 등과 같이 C/N비가 낮은 폐기물을 호기성으로 퇴비화하는 경우 질소 성분이 많이 손실될 수 있으며, 이는 비료성분의 손실, 악취를 비롯한 환경오염 발생 등을 유발할 수 있다. 본 연구에서는 퇴비화 공정에서 질소성 물질의 보존방법을 도출하기 위한 기초 연구로 음식쓰레기를 실험실 규모로 퇴비화하면서 일반적인 호기성 퇴비화 공정에서 일어나는 질소의 거동을 분석하였다. 음식쓰레기는 종이나 나무조각과 혼합하여 퇴비화하였으며, 질소성 물질의 거동을 평가하기 위해 퇴비시료에 포함된 암모니아, 산화성 질소, 유기성 질소를 측정하였다. 배가스로 손실되는 질소도 황산으로 흡수시켜 정량하였다. 퇴비화 반응의 활성화 여부가 유기성 질소의 무기화에 큰 영향을 미치는 것으로 조사되었다. 활성이 좋은 퇴비를 식종한 경우 반응 초기부터 유기성 질소의 무기화가 활발히 진행되어 많은 양의 질소가 손실된 반면 초기의 낮은 pH 기간이 길어지면 유기성 질소의 분해가 지연되는 것으로 나타났다. 암모니아 손실량은 주입된 공기량의 영향이 큰 것으로 판단되며, 암모니아 손실이 증가하면 퇴비의 암모니아 함량이 크게 감소하였다. 질소에 대한 물질수지 분석을 통하여 초기 질소의 28~38%가 암모니아로 전환되었으며, 전환된 암모니아의 77~94%가 가스로 손실된 것으로 나타났다.

• 대한환경공학회지
• /
• 제29권4호
• /
• pp.460-465
• /
• 2007

본 연구에서는 고농도 암모니아성질소로 오염된 고체배지로부터 분리해 낸 Leclercia adecarboxylata를 이용하여 암모니아성질소의 제거특성 및 기작을 파악하여 폐수처리의 적용가능성에 대해 살펴보았다. 질소제거에 있어서 가장 널리 알려진 생물학적 질산화와 후탈질에 의한 질소의 대기로의 방출이 아닌 질소합성균주를 이용한 질소의 체내합성을 이용한 영양물질의 제거 가능성에 대해 접근해 보았다. L. adecarboxylata는 무염분조건에서 암모니아성질소의 제거와 균체중식이 가장 왕성했으나, 염분이 4%를 넘어서게 되면 그 효율은 급격히 저하되었다. 약 80 mg/L의 암모니아성질소는 20시간 이내에 거의 대부분 제거되었으나, 500 mg/L인 시료는 탄소원의 부족으로 인해 50시간 이상 처리후에도 50%의 제거율에도 미치지 못해 탄소원이 많을수록 질소제거율은 높음을 알 수 있었다. 탄소원이 모두 소모되고 난 이후에는 더 이상 질소제거는 이루어지지 않았으나, 탄소원을 추가로 공급했을 때 제거효율은 다시 증가했다. 시료의 pH는 미생물의 증식에 의해 8에서 6.36까지 감소했다. 암모니아성질소가 제거되는 동안 아질산성질소와 질산성질소의 축적은 일어나지 않았고, TKN값은 큰 차이를 보이지 않은 것으로 미루어 볼 때 유기질소로의 합성을 추측할 수 있었다. 유기질소 중 단백질의 농도를 측정해 본 결과 초기시료에서는 불검출 되었으나, 48시간 경과후의 시료에는 193.1 mg/L의 단백질이 검출 되었다. 따라서 L. adecarboxylata는 암모니아성질소를 유기질소로 합성하는 능력이 탁월하여 폐수중의 암모니아성질소의 제거에 이용가치가 클 것으로 판단된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.421-424
• /
• 2006

High nitrogen steels (HNS) exhibit both high strength and ductility during tensile deformation. In the present study the Fe-18Cr-14Mn-4Ni-0.9N high nitrogen steel was heat treated at $1000^{\circ}C$ and $1100^{\circ}C$ to produce $Cr_2N$ precipitates in austenite matrix and full austenite microstructures, respectively. Tensile tests of the heat treated specimens were performed at two different strain rates of 0.05/sec and 0.00005/sec. Each tensile curve of the specimens could be well characterized by the the modified Ludwik equation. Plastic deformation of the steel was adequately represented by the four parameters of the modified Ludwik equation. At 0.05/s strain rate, the specimen with the $Cr_2N$ precipitate exhibited higher strength than the full austenite specimen, while the full austenite specimen showed better mechanical properties at 0.00005/s strain rate. It was found that the $Cr_2N$ precipitates influences deformation behavior of the high nitrogen steel significantly.

• 한국초전도ㆍ저온공학회논문지
• /
• 제3권1호
• /
• pp.16-21
• /
• 2001

Bubble behavior is studied with an electrode system which consists of coaxial spiral coil-to-cylindrical electrode with an insulation barrier and spacers and is immersed in liquid nitrogen for simulation of insulation environments in high temperature superconducting(HTS) coils The results show that the bubble behavior Is affected severely by electric field: (1) under low applied voltage bubbles rise by buoyancy, but at higher applied voltage they are trapped in a lower electric field region below the coil electrode, and (2) the trapped bubble flows along the downside of coil electrode if no obstruction is in a groove between coil turns. but it splashes out of the groove after its growing if the obstruction such as spacer-exists.