• 방사성폐기물학회지
• /
• 제10권2호
• /
• pp.77-85
• /
• 2012

본 연구는 우라늄-함유 석회침전물로부터 U을 제거(/회수) 하기위하여 탄산염 산화용해-산성화 침전과 질산용해-과산화수소 침전을 각각 고찰하였다. 석회침전물 내 우라늄을 용해하는 관점에서는 질산용해가 유리하나 (약 98% 이상 용해) 이 경우 U과 Al, Ca, Fe, Mg, Si 등의 공존 불순물이 다량 공용해되고, 또한 과산화수소 침전에서도 상당량의 불순물이 U과 함께 공침전 된다. 한편 탄산염 용해에 의한 산성화 침전은 우라늄의 용해가 90% 이하로 방사성 고체페기물의 부피감용 측면에서는 질산용해 보다 덜 효율적이지만, 우라늄과 불순물의 공용해나 산성화 침전에 의한 우라늄과 불순물의 공침전이 거의 일어나지 않아 보다 순수한 U을 회수하는 측면에서는 매우 효과적이다.

• 한국표면공학회지
• /
• 제49권3호
• /
• pp.231-237
• /
• 2016

This article reports a new chemical bath for preparing a mirror-like surface of AZ31 Mg alloy. In order to find an appropriate chemical polishing solution, four different acidic solutions of sulphuric acid, nitric acid, acetic acid and a specially designed mixture of nitric acid and acetic acid were investigated in view of the changes in surface appearance, roughness and dissolution rate of AZ31 Mg alloy. The surface scales on AZ31 Mg alloy were readily removed by all the acidic solutions, but a reflective surface was produced only by etching in the specially designed solution, and only after a specific etching time. The surface roughness increased with etching time in sulphuric acid, nitric acid, and acetic acid, but it lowered after a specific etching time in the specially designed mixture of nitric acid and acetic acid. Dissolution rate of the alloy in the specially designed mixture of nitric acid and acetic acid appeared to be more than twice than that in separate nitric acid or acetic acid. In this work, we recommend the mirror-like surface of AZ31 Mg alloy obtained by polishing for an optimum time in a mixture of nitric acid and acetic acid for following surface finishings, chemical conversion coating, electroplating, electrophoretic painting and anodizing treatment.

• Bulletin of the Korean Chemical Society
• /
• 제24권11호
• /
• pp.1613-1617
• /
• 2003

In the phosphoric acid based etchant, the dissolution rates of Mo films were measured by microgravimetry and the corrosion potentials of Mo and Al were estimated by Tafel plot method with various concentrations of nitric acid. Dissolution rate of Mo increased with the nitric acid concentration and reached a limiting value at high concentration of nitric acid in ambient condition. Corrosion potentials of Mo and Al shifted to positive direction and the difference between potentials of both metals was about 1,100 mV and 1,200 mV with 1% and above 4% of $HNO_3$, respectively. For a Mo/Al bilayers, the dissolution rate inversion is the main reason for good taper angle in shower etching process. Taper angles are observed by scanning electron microscope (SEM) after wet etching process for Mo/Al layered films with different concentrations of $HNO_3$. In the etch side profile, it was found that Al corroded faster than Mo below 4% of $HNO_3$ in dip etching process, however, Mo corroded faster above 4%. Trend for variation of taper angle of etched side of Mo/Al layered film can be explained by considering the effect corrosion rates of both metals with various concentrations of $HNO_3$.

• 방사성폐기물학회지
• /
• 제11권2호
• /
• pp.85-93
• /
• 2013

본 연구는 우라늄 변환시설 운전 중에 발생된 우라늄 함유 슬러지를 가열 처리하여 분말 형태로 저장 중인 우라늄 함유 슬러지의 열분해 고체폐기물 (Thermal Decomposed Solid Waste of uranium-bearing sludge : TDSW)을 대상으로 TDSW의 용해, TDSW 질산 용해액의 알카리화에 의한 불순물 제거 및 탄산염 알카리화 용액의 산성화에 의한 U 선택적 제거/회수 특성 등을 규명하였다. TDSW의 용해는 질산용해가 탄산염 산화용해 보다 효과적이었다. 1M 질산에서 TDSW의 약 30wt%가 고체 잔류물로 불용해되었고, TDSW 내 함유 U은 99% 이상이 용해되었다. TDSW의 질산 용해액의 알카리화는 탄산염에 의한 알카리화가 불순물 제거 측면에서 보다 효과적이며, 탄산염 알카리화 (pH 약 9)에서 U과 공용해된 Ca, Al, Zn 및 Fe 등의 $98{\pm}1%$가 제거되었다. 그리고 불순물이 거의 제거된 알카리화 용액 (0.5 M $H_2O_2$ 첨가)의 산성화 (pH 약 3) 에서 U의 99% 이상을 회수할 수 있어 TDSW로부터 U을 선택적으로 제거/회수할 수 있었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.406.1-406
• /
• 2002

• 자원환경지질
• /
• 제52권6호
• /
• pp.595-604
• /
• 2019

본 연구 목적은 비-가시성 금 정광을 마이크로웨이브-질산용출 시키고, 여과지를 이용하여 금을 단순하게 얻고자 하였다. 본 실험에서 사용된 시료의 경우 질산농도별로 마이크로웨이브-질산용출실험을 수행한 결과 Fe, Te, Ag 등은 완전용출(100%) 되었지만, Au는 용해되지 않았다. 용출용액을 3장의 여과지로 여과하여 SEM/EDS 분석한 결과 첫 번째, 두 번째 및 세 번째 여과지의 표면 및 단면 모두에서 Au가 검출되었다. 고체-잔류물이 포함된 여과지 3장을 모두 납-시금법에 사용한 결과 질산농도 모두에서 금 입자들이 회수되었다. 최대 금 입자(452.50g/t)가 얻어진 용출조건은 질산농도 6M에서 그리고 마이크로웨이브 조사시간 12분에서였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.189-196
• /
• 2003

Soil-cement column is often used as a contaminant barrier. This study presents the results of experimental study performed to investigate the changes of properties of soil-cement column under the attack of acids. Sulfuric nitric, and ascetic acid were used as contaminants. Specimen were made of clayey and sandy soils with addition of cement and water Permeability of soil-cement decreased with time during permeability test. When significant amount of acid percolated the specimen, permeability increased and compressive strength decreased due to the dissolution and leaching of cement and its chemical reaction compounds. Sulfuric and nitric acid were more effective than ascetic acid in deteriorating soil-cement column. Amount of acid required to lower the pH of soil cement below 12 was calculated from the results of permeability tests. This leads to a conclusion that, under the conditions employed in this study, the chemical stability of soil-cement column could be maintained against acid attack for longer than generally accepted lifetime of contaminant barriers.

• 공업화학
• /
• 제9권3호
• /
• pp.388-393
• /
• 1998

의료용 동위원소인 fission Mo($^{99}Mo$)를 제조하기 위한 공정중 $UO_2$ 표적의 질산용해공정의 조업조건을 확립하기 위하여 $UO_2$ pellet의 유효표면적($s:0.034{\sim}0.282cm^2/g-UO_2$), 질산농도(1.5~10N), 반응온도 ($40{\sim}105^{\circ}C$)에 따른 $HNO_3$ pellet의 용해특성을 확인하였다. 그 결과 용해속도가 $UO_2$ pellet의 유효표면적에 정비례하며 표면적이 클수록 그 경향이 뚜렸함을 확인하였고, 반응속도와의 관계가 dc/dt = 10.6s로 나타났다. 용해속도와 질산농도와의 관계는 일정온도($90^{\circ}C$)에서 [$HNO_3$]1.42에 비례하는 것으로 나타났고, 온도변화에 따른 관계는 $90^{\circ}C$까지는 온도가 증가함에 따라 용해속도가 급격히 증가하나 그 이상에서는 오히려 감소하는 것으로 나타났으며, 활성화 에너지가 36.3KJ/mol로 계산되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.115-116
• /
• 2023

This study aims to investigate and improve the carbon dioxide sequestration capability and the mechanical properties of non-hydraulic low calcium silicate cement especially designed for CO₂ reaction and ordinary Portland cement subjected to the carbonation curing facilitating pH swing method. Nitric acid (HNO₃) was utilized as an liquid for the mixing of cement paste to enhance the initial dissolution of Ca ions from the cements by promoting low pH environment and prevent the direct precipitation of Ca with the anion, owing to the high solubility of Ca(NO₃)₂ in water. The results presented that the higher the concentration of HNO₃, the higher the compressive strength and CO₂ sequestration (until 0.1 M). Ca dissolution caused by the harsh acid attack onto the anhydrous cement particle lead to the higher carbonation reaction degree, forming abundant CaCO₃ crystals after the reaction. However, cement paste mixed with excessively high concentration of HNO₃ presented deterioration due to the too harsh pH environment and abundant NO₃- ions which are known to retard the reaction of cement.

• Corrosion Science and Technology
• /
• 제20권3호
• /
• pp.105-111
• /
• 2021

In oxidizing nitric acid solutions, stainless steel undergoes intergranular corrosion accompanied by grain dropping and changes in the corrosion rate. For the safe operation of reprocessing plants, this mechanism should be understood. In this study, we constructed a three-dimensional computational model using a cellular automata method to simulate the intergranular corrosion propagation of stainless steel. The computational model was constructed of three types of cells: grain (bulk), grain boundary (GB), and solution cells. Model simulations verified the relationship between surface roughness during corrosion and dispersion of the dissolution rate of the GB. The relationship was investigated by simulation applying a constant dissolution rate and a distributed dissolution rate of the GB cells. The distribution of the dissolution rate of the GB cells was derived from the intergranular corrosion depth obtained by corrosion tests. The constant dissolution rate of the GB was derived from the average dissolution rate. Surface roughness calculated by the distributed dissolution rates of the GBs of the model was greater than the constant dissolution rates of the GBs. The cross-sectional images obtained were comparable to the corrosion test results. These results indicate that the surface roughness during corrosion is associated with the distribution of the corrosion rate.