• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.3
• /
• pp.291-298
• /
• 1995

An intensive field study was carried out during Aug. 1993 in Seoul to study the characteristics of summertime visibility and diurnal trend of ionic composition of ambient particles. A transmissometer, nephelometer with heated and unheated inlets, PM3 fine particle sampler, and cascade impactor were used to measure optical and particle properties of ambient air. During this study period, a weak smog episode has occurred. Light scattering by particles is the most dominant factor on total light extinction. The effect of light absorption by particles in Seoul is much higher than other major cities in U.S.A. throughout the summer and fall with relatively constant values. The effect of water on $b_{sp}$ was small during the period. The particle size distribution shows a typical bimodal one. Sulfate, ammonium, chloride, and nitrate are the major chemical species in fine fraction aerosols, about 30% of toral mass concentration. Concentraion of sulfate is higher during the daytime while those of nitrate and chloride are higher during the nighttime. Ammonium concentration is constant through the daytime.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.06a
• /
• pp.255-256
• /
• 2014

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.6
• /
• pp.630-639
• /
• 2001

This study proposes a new calculation method for generating real nighttime lamp-lit images. In order to improve the color appearance in the prediction of a nighttime lamp-lighted scene, the lamp-lit image is synthesized based on spectral distribution using the estimated local spectral distribution of the headlamps and the surface reflectance of every object. The Principal component analysis method is introduced to estimate the surface color of an object, and the local spectral distribution of the headlamps is calculated based on the illuminance data and spectral distribution of the illuminating headlamps. HID and halogen lamps are utilized to create beam patterns and captured road scenes are used as background images to simulate actual headlamp-lit images on a monitor. As a result, the reproduced images presented a color appearance that was very close to a real nighttime road image illuminated by single and multiple headlamps compared to the conventional graphic-based algorithm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.3
• /
• pp.397-405
• /
• 2024

In order to improve the visibility of nighttime thermal infrared images, a simulation method with daytime color images was proposed. As a simulation method consisting of two steps, the daytime thermal infrared image was simulated by learning the unpaired nighttime thermal infrared image and daytime thermal infrared image, then the result was translated into a daytime color image. A temperature change regression equation was constructed and applied to reflect the systematic characteristics of temperature changes in daytime and nighttime images, and day and night simulation and colorization were trained and modeled by CycleGAN. For the experimental area, 100 images were captured and used for training. As a result, the simulation showed an average SSIM of 0.2449 and a PSNR of 51.2254. It was confirmed that the method could simulate complex and detailed features such as vegetation.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.9-16
• /
• 2012

The performance of road markings is classified into the visibility at daytime, night time, wet condition and rainy conditions. The objective of this study is to obtain the driving safety of drivers under conditions of unstable weather condition such as the rain. The visibility of road markings is closely related to the preview time and detection distances and the ways to improve road marking materials and increase the dry retroreflectivity and wet retroreflectivity, which are the measures of daytime and nighttime visibility is researched to decrease the traffic accidents. For this purpose, Road marking glass beads with the refraction rate of 1.5 and 2.2 are introduced to raise the retroreflectivity. After investigating the minimum threshold retroreflectivity and Install Minimum retroreflectivity at home and abroad, minimum control values for the roadmarking visibility and improvement of nightime rainy retroreflectivity are suggested by physical properties and retroreflectivity experiments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.445-451
• /
• 2012

Visual changes and speed changes in curved sections of highways are more dangerous than straight sections According to the enquetes conducted by Coalition for Transportation Culture in 1999, about 78% of drivers are dissatisfied with traffic guide and safety signs, with lack of visibility being the largest reason with about 27.9% of respondents indicating it as reason for dissatisfaction. In particular, the lack of visibility during nighttime or bad weather not only threatens driver safety due to poor delivery of information, but also affects the service level of highways. Because of this a new delineation must be installed and managed to enhance driver visibility. In this research, an optimal delineation system to enhance traffic safety is presented. In this research drivers effectively obtained information on highway alignment on the curved sections using a retro-reflection type delineation system and a newly-developed internal lighting delineation system to improve safety on the highways. A statistical comparison was conducted and analysis was done for the delineation systems that enhanced visibility through primary and secondary enquaetes. As a result, inside-lighting delineator will be selected in terms of safety at the curve sections. The inside-lighting delineator was more effective than the retro-reflection delineator on visibility, the necessity of reduction of speed and will reduce the hazard at curve sections. It is anticipated that when a delineation system based on this research is installed, a reduction in the number the number and severity of traffic accidents on curved sections will be reduced. In addition this system will more effectively provide drivers with information about highway alignment.

• Journal of Korean Society of Transportation
• /
• v.30 no.4
• /
• pp.95-106
• /
• 2012

Driver's capability of identifying the change in freeway alignments and environments is one of important factors associated with traffic safety on freeways. In particular, driver's visibility and recognition capability are highly dependent on the altitude of the sun by sunset, sunrise, and nighttime. The purpose of this study is to identify the characteristics of geometric conditions affecting crash occurrences at sunset, sunrise, and nighttime. Poisson and negative binomial regressions were adopted to predict freeway crash frequency in this study. Freeway crash data during 2007~2010 were used for developing the crash frequency models. A set of variables representing the characteristics of geometric conditions were identified as significant ones affecting crash occurrences. The results of this study would be useful in deriving effective countermeasures for preventing traffic crashes that mainly occur at sunset, sunrise, and nighttime on freeways.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.127-129
• /
• 2018

RadarBeacons are navigational equipment that helps the navigators avoid dangerous rocks, such as heavy fog, nighttime, etc. when ships operate, or when visibility is bad. The existing antenna was researching the development of the advanced radar eacon (Enhanced Radar Beacon) for improving the development of the next generation racon with the AIS (Automatic Identification System) function.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.147-150
• /
• 2005

Fixed lighting of public ways for both vehicles and pedestrians can create a nighttime environment in which people see comfortably and can quickly and accurately identify objects on the roadway being travelled roadway lighting can improve traffic safety, achieve efficient traffic movement and promote the general use of the facility during darkness. The design of a roadway lighting system involves consideration of visibility, economics, esthetics, safety and environmental conditions. This paper describe estimation of horizontal illuminance by actual measurement at main streets in Jejusi. We try to evaluate Jejusi Roadway Lighting Conditions for modeling by computer simulation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.49-56
• /
• 2021

The purpose of this study is to develop a methodology to select a cluster of night traffic accidents using CRP (Continuous Risk Profile) analysis. the other purpose of this study is to present the characteristics of the traffic accident cluster section selected at night using CRP analysis. The CRP analysis was performed considering traffic volume of target routes through traffic accident data. In addition, variables were set according to the freeway sections. the method of subtracting the daytime CRP from the nighttime CRP was used to analyze the nighttime traffic accident. As a result, Using the CRP analysis, the sections of hotspot were identified and plotted based on traffic accidents. Also, the sections where traffic accidents are frequent were those where IC or Tunnels were installed, and there was a deviation from the general section. In conclusion, CRP analysis could be used to calculate the frequent section of specialized traffic accidents at night, and it was selected as a point in need of improvement due to the frequent occurrence of specialized traffic accidents at night in the section where IC or tunnel facilities are installed. In addition, it is inferred that the number of specialized traffic accidents at night in the section where IC or tunnel facilities are installed is a factor in the problem of night visibility due to lighting facilities.