• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.273-281
• /
• 2010

Nickel recovery method was studied by the wet process from the catalyst used in hydrogenation process. Nickel content in waste catalyst was about 16%. At the waste catalyst leaching system by the alkaline solution, selective leaching of nickel was possible by amine complex formation reaction from ammonia water and ammonium chloride mixed leachate. The best leaching condition of nickel from mixed leachate was acquired at the condition of pH 8. LIX65N as chelating solvent extractant was used to recover nickel from alkaline leachate. The purity of recovered nickel was higher than 99.5%, and the whole quantity of nickel was recovered from amine complex.

• 자원리싸이클링
• /
• 제13권3호
• /
• pp.27-36
• /
• 2004

수소화 반응용 니켈 폐촉매를 배소하여 산화니켈을 회수한 다음, 회수한 산화니켈을 산처리하고 침전법으로 Kieselguhr에 담지 된 니켈 촉매로 재생시켰다. 폐촉매의 배소 조건이 니켈산화물의 회수에 미치는 영향을 조사하였다. 니켈 폐촉매의 재생 과정에서 $1,000^{\circ}C$의 온도에서 배소 하였을 경우에 대부분 니켈산화물로 회수할 수 있었다. 산화니켈을 산처리하여 얻은 질산니켈을 사용하여 Kieselguhr에 담지 된 니켈 촉매를 제조하였다. 이때 조촉매의 첨가, 침전 조건 및 환원 조건 등이 재생된 촉매의 식물성 오일의 수소화 반응 성능에 미치는 영향을 조사하였다. 알카리 금속인 CaO와 희토류 금속인 $Ce_2$$O_3$를 조촉매로 첨가했을 때 수소화 반응의 활성이 증가하였다.

• Bulletin of the Korean Chemical Society
• /
• 제26권6호
• /
• pp.887-891
• /
• 2005

Novel nickel catalyst deposited on nanoporous carbon was found to be an efficient catalyst for the epoxidation of simple alkenes with $O_2$ and isobutyraldehyde under mild conditions. Alkenes exhibited different reactivities towards Ni-catalyst and epoxidation with stilbene proceeds stereospecifically. This may be rationalized with the mechanism involving coordinated acylperoxy radical intermediate. Nickel contents depend on the preparative methods and the KNI-3 catalyst, which was synthesized by wet impregnation of $Ni(NO_3)_2$ into nanoporous carbon, shows the highest activity. The activity of the catalyst is well correlated with contents of nickel. Recycled catalysts suffer considerable loss of activity due to leaching of catalytic active species, nickel.

• 공업화학
• /
• 제28권3호
• /
• pp.326-331
• /
• 2017

캐스터오일은 수소화반응을 통해 계면활성제의 중간체 등 유용한 화학산업의 원료로 활용 가능하다. 본 연구에서는 캐스터오일의 수소화용 니켈촉매의 제조조건과 전처리 조건에 대한 영향을 연구하였다. 니켈촉매는 침전제와 pH를 다르게 하여 실리카 담체상에 침전법으로 담지되었고, 다시 산화와 환원의 반복된 전처리를 행하였다. 니켈촉매의 활성은 캐스터오일의 요오드 가를 측정하여 비교하였고, 니켈촉매의 분산도는 XRD, BET, TEM을 통하여 분석하였다. 니켈촉매의 활성을 CO산화반응실험을 통하여도 비교하였다. 산화와 환원 사이클의 반복에 의해 니켈의 재분산이 실리카 상에서 발생하였고, 이것이 캐스터오일 수소화반응 활성을 증진시키는데 기여하였다.

• 한국재료학회지
• /
• 제13권7호
• /
• pp.415-419
• /
• 2003

Carbon nanotubes were formed on silicon substrate using microwave plasma-enhanced chemical vapor deposition method. The possibility of carbon nanotubes formation was related to the thickness of nickel catalyst. The growth behavior of carbon nanotubes under the identical thickness of nickel catalyst was strongly dependent on the magnitude of the applied bias voltage. High negative bias voltage (-400 V) gave the vertically well-aligned carbon nanotubes. The vertically well-aligned carbon nanotubes have the multi-walled structure with nickel catalyst at the end position of the nanotubes.

• 대한화학회지
• /
• 제38권5호
• /
• pp.397-403
• /
• 1994

질산니켈과 아연을 에탄올 용매하에서 환류반응시켜 얻은 활성화시킨 촉매는 히드라진 존재하에서 방향족 니트로화합물을 주로 아족시 화합물로 환원시켜 주었다. 그러나 질산니켈 대신 염화니켈을 사용하여 얻은 촉매는 같은 조건하에서 단지 방향족 아민만을 얻을 수 있었다. 활성화시키지 않고, 방향족 니트로화합물, 염화니켈이나 질산니켈, 아연 그리고 히드라진 혼합물을 환류반응 시킬 때는 낮은 수율의 아조, 아족시와 아민 화합물을 얻을 수 있었다.

• 한국응용과학기술학회지
• /
• 제35권1호
• /
• pp.151-156
• /
• 2018

산업과 의학이 발전되면서 많은 인구는 삶의 질에 관심을 가지게 되었다. 건강에 대한 시각이 높아지면서 육류보다 채식 또는 식물성 오일을 선호하게 되었다. 오늘날 주로 니켈 촉매를 사용한 공정이 개발되면서 식물성 오일의 보존기간이 늘어나고 이동성이 편리해졌다. 현재 유지경화용 니켈 촉매는 외국기업이 세계시장을 장악하고 있다. 한편, 국내 니켈 촉매의 대량 생산 기술은 퇴보 되어 전량 외국에서 수입하고 있는 실정이다. 따라서 활발한 기초연구가 필요하고 국내에서 상용화 할 수 있는 촉매개발이 필요하다. 본 연구는 수소화 반응으로부터 유지경화에 기반이 되는 니켈을 주 활성 촉매제로 사용하였고, 희토류가 촉매의 활성에 주는 영향을 알아보았다. 일정량의 희토류는 니켈의 분산을 유도하여 효율을 증가시키고 조촉매로써 사용이 가능하였다.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1149-1153
• /
• 2002

CH4/CO2 dry reforming was carried out to make syn gas on the Ni/Al2O3 catalysts calcined at different temperatures. The Ni/Al2O3 (850 $^{\circ}C)$ catalyst gave good activity and stability w hereas the Ni/Al2O3 $(450^{\circ}C)$ catalyst showed lower activity and stability. The NiO/Al2O3 catalyst calcined at $850^{\circ}C$ for 16 h (Ni/Al2O3 $(850^{\circ}C))$ formed the spinel structure of nickel aluminate, which was confirmed by TPR. The carbon formation rate on the Ni/Al2O3 $(850^{\circ}C)$ catalyst was very low till 20 h, and then steeply increased with reaction time without decreasing the activity for CH4 reforming. The Ni/Al2O3 $(450^{\circ}C)$ catalyst showed high carbon formation rate at the initial reaction time and then, the rate nearly stopped with continuous decreasing the activity for CH4 reforming. Even though the amount of carbon deposition on the Ni/Al2O3 $(850^{\circ}C)$ catalyst was higher than that on the Ni/Al2O3 $(450^{\circ}C)$ catalyst, the activity for CH4ing was also high, which could be attributed to the different type of the carbon formed on the catalyst surface.

• 에너지공학
• /
• 제20권3호
• /
• pp.252-258
• /
• 2011

Nickel fiber mat was investigated as a potential structured catalyst for steam reforming of biogas in the temperature range of $600-700^{\circ}C$. The activity of as-received catalyst was very low owing to the smooth surface of fibers. Pretreatment of the catalyst by oxidation followed by reduction under methane partial oxidation condition significantly improved the catalytic activity, although degradation of the activity was found during the reaction due to oxidation and sintering. This deactivation was retarded by supplying additional hydrogen in the inlet gases or by coating $CeO_2$ over the catalyst surfaces.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 Proceedings of 5th International Joint Symposium on Microeletronics and Packaging
• /
• pp.109-109
• /
• 2000

Recently, carbon nanotube has been investigating for field emission display ( (FED) applications due to its high electron emission at relatively low electric field. However, the growing of carbon nanotube generally requires relatively high temperature processing such as arc-discharge (5,000 ~ $20,000^{\circ}C$) and laser evaporation (4,000 ~ $5,000^{\circ}C$) methods. In this presentation, low temperature growing of carbon nanotube by plasma enhanced chemical vapor deposition (PECVD) using nickel catalyst which is compatible to conventional FED processing temperature will be described. Carbon n notubes with average length of 100 run and diameter of 2 ~ $3\mu$ill were successfully grown on silicon substrate with native oxide layer at $550^{\circ}C$using nickel catalyst. The morphology and microstructure of carbon nanotube was highly depended on the processing temperature and nickel layer thickness. No significant carbon nanotube growing was observed with samples deposited on silicon substrates without native oxide layer. This is believed due to the formation of nickel-silicide and this deteriorated the catalytic role of nickel. The formation of nickel-silicide was confirmed by x-ray analysis. The role of native oxide layer and processing parameter dependence on microstructure of low temperature grown carbon nanotube, characterized by SEM, TEM XRD and R없nan spectroscopy, will be presented.