• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2007년도 추계학술연구발표회 및 정기총회
• /
• pp.26-26
• /
• 2007

• 한국결정성장학회지
• /
• 제25권3호
• /
• pp.116-120
• /
• 2015

혼합이온 전도체인 $K_2NiF_4$-type 산화물인 $La(Ca)_2Ni(Cu)O_{4+{\delta}}$ 분말을 합성하여 결정구조 분석과 분말의 나노구조화에 따른 고체산화물 연료전지의 양극 성능을 비교 평가하였다. 이온 반경이 큰 Cu가 Ni 자리에 치환되어 Ni-O 팔면체 구조에서 c 축 방향으로 결정구조가 팽창하였으며, Ni-Cu의 Jahn-Teller 뒤틀림으로 산소이온 산화 환원 반응과 이온 전도도 특성에 영향을 주었다. 특히 나노구조의 $La(Ca)_2Ni(Cu)O_{4+{\delta}}$ 분말의 경우 표면 촉매성능이 향상되어 단위 전지 성능 향상 결과를 얻을 수 있었다. Ni-YSZ 음극 지지체에 8YSZ 전해질을 dip-coating한 후 $La(Ca)_2Ni(Cu)O_{4+{\delta}}$ 분말을 양극으로 도포하여 얻은 SOFC 단위성능 측정 결과 $800^{\circ}C$에서 $1w/cm^2$의 최대 출력 값을 얻을 수 있었다.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.499-502
• /
• 2001

Functionally gradient NiCrAlY/$ZrO_2$-$Y_2$$O_3$ and NiCrAlY/$ZrO_2$- $CeO_2$-$Y_2$$O_3$ coatings were prepared by APS. The as-sprayed microstructure consisted of metal-rich and ceramic-rich regions, between which $Al_2$$O_3$-rich layers existed owing to the oxidation during APS. During oxidation between 900 and $1100^{\circ}C$ in air, the pre-existing $Al_2$$O_3$-rich scales grew, due mainly to the preferential reaction of Al with inwardly transporting oxygen along the heterogeneous phase boundaries. As the amount of ceramics in the coating increased, the oxidation resistance increased.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.161-165
• /
• 2021

In general, SOFCs mainly use Ni-YSZ cermet, a mixture of Ni and YSZ, as an anode material, which is stable in a high-temperature reducing atmosphere. However, when SOFCs have operated at a high temperature for a long time, the structural change of Ni occurs and it results in the problem of reducing durability and efficiency. Accordingly, a development of a new anode material that can replace existing nickel and exhibits similar performance is in progress. In this study, SrTiO₃, which is a perovskite-based mixed conductor and one of the candidate materials, was used. In order to increase the electrical conduction properties, Y_0.08Sr_0.92Fe_0.3Ti_0.7O₃, doped with 0.08 mol of Y³⁺ in Sr-site and 0.03 mol of transition metal Fe³⁺ in Ti-site, was synthesized and its chemical diffusion coefficient and reaction constant were measured. Its electrical conductivity changes were also observed while changing the oxygen partial pressure at a constant temperature. The performance as a candidate electrode material was verified by predicting the defect area through the electrical conductivity pattern according to the oxygen partial pressure.

• 전기화학회지
• /
• 제10권4호
• /
• pp.283-287
• /
• 2007

한국에너지기술연구원에서는 중온 ($700{\sim}800^{\circ}C$) 작동용 연료극 지지체 평관형 SOFC 스택을 구성하는 단위 번들을 개발했다. 연료극 지지체 평관형 셀은 Ni/YSZ 서밋 연료극 지지체 튜브, 8몰% $Y_2O_3$ stabilized $ZrO_2$ (YSZ) 전해질, $LaSrMnO_3$ (LSM)과 LSM-YSZ composite 및 $LaSrCoFeO_3(LSCF)$로 구성된 다중층 공기극으로 구성됐다. 제조된 연료극지지체 평관형 셀은 유도 브레이징 법에 의해 페리틱 (ferritic) 금속 캡에 접합됐고, 공기극의 전류집전을 위해 공기극 외부에 Ag 선 및 $La_{0.6}Sr_{0.4}CoO_3(LSCo)$ paste를 이용했으며, 연료극의 전류집전은 Ni felt, wire, 그리고 paste를 이용했다. 단위 번들을 만들기 위한 연료극 지지체 평관형 셀의 반응 면적은 셀 당 $90\;cm^2$ 이었으며, 2개의 셀이 병렬로 연결되어 1개의 단위 번들이 됐고, 총 12개의 단위 번들이 직렬로 연결되어 스택을 구성한다. 공기 및 3%의 가습된 수소를 산화제 및 연료로 사용한 단위 번들의 운전 결과 최대 성능은 $800^{\circ}C$에서 $0.39\;W/cm^2$의 출력이 나타났다. 본 연구를 통해 연료극 지지체 평관형 SOFC 셀의 기본 기술과 KIER 만의 독특한 연료극 지지체 평관형 SOFC 스택을 구성하는 단위 번들의 개념을 확립할 수 있었다.

• 한국재료학회지
• /
• 제14권5호
• /
• pp.368-373
• /
• 2004

To improve the conventional cathode-supported tubular solid oxide fuel cell (SOFC) from the viewpoint of low cell power density, expensive fabrication process and high operation temperature, the anode-supported tubular solid oxide fuel cell was investigated. The anode tube of Ni-8mol% $Y_2$O$_3$-stabilized $ZrO_2$ (8YSZ) was manufactured by extrusion process, and, the electrolyte of 8YSZ and the multi-layered cathode of $LaSrMnO_3$(LSM)ILSM-YSZ composite/$LaSrCoFeO_3$ were coated on the surface of the anode tube by slurry dip coating process, subsequently. Their cell performances were examined under gases of humidified hydrogen with 3% water and air. In the thermal cycle condition of heating and cooling rates with $3.33^{\circ}C$/min, the anode-supported tubular cell showed an excellent resistance as compared with the electrolyte-supported planar cell. The optimum hydrogen flow rate was evaluated and the air preheating increased the cell performance due to the increased gas temperature inside the cell. In long-term stability test, the single cell indicated a stable performance of 300 mA/$\textrm{cm}^2$ at 0.85 V for 255 hr.

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.562-566
• /
• 2012

본 논문에서는 세그먼트 관형 고체산화물 연료전지(SOFC)의 설계 및 제작과 특성 분석을 다루고 있다. 관형 세라믹 지지체는 압출 공정을 통하여 제작하였으며, NiO-YSZ 연료극과 YSZ 전해질은 담금 코팅법을 통해 세라믹 지지체에 코팅하였다. 코팅된 세라믹 지지체를 $1,350^{\circ}C$에서 5시간 동안 열처리하였으며, $10{\mu}m$ 미만의 치밀하고, 균열이 없는 YSZ 전해질 층을 얻을 수 있었다. 또한 열처리된 세라믹 지지체에 LSM-YSZ/LSM/LSCF로 구성된 다층 구조 공기극을 담금법으로 코팅하여 $1,150^{\circ}C$에서 열처리하였다. 세라믹 관형 지지체에 코팅된 세그먼트 SOFC 셀은 Ag-glass 연결재를 사용하여 전기적으로 직렬 연결하였으며, 수소연료 유량과 운전 온도에 따른 세그먼트 SOFC의 성능 변화를 측정하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권4호
• /
• pp.8-11
• /
• 2006

High temperature superconducting coated conductor has various buffer structures on Ni-W alloy. We comparatively studied the growth conditions of a multi buffer layer $(CeO_2/YSZ/CeO_2)$ and a single buffer layer$(CeO_2)$ on textured Ni-W alloy tapes. XRD data showed that the qualities of in-plane and out-of-plane textures of the two type buffer structures were good. Also, we investigated the properties of SmBCO superconducting layer that was deposited on the two type buffer structure. The SmBCO superconducting properties on the single and multi buffer structure showed different critical current values and surface morphologies. FWHM of In-plane and out-of-plane textures were $7.4^{\circ},\;5.0^{\circ}$ in the top CeO2 layer of the multi-buffer layers of $CeO_2/YSZ/CeO_2$, and $7.3^{\circ},\;5.1^{\circ}$ in the $CeO_2$ single buffer layer. $1{\mu}m-thick$ SmBCO superconducting layers were deposited on two type buffer layer. $I_c$ of SmBCO deposited on single and multi buffer were 90 A/cm, 150 A/cm and corresponding $J_c$ were $0.9MA/cm^2,\;1.5MA/cm^2$ at 77K in self-field, respectively.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.195-198
• /
• 2010

It has been considered to apply GDC ($Gd_{0.1}Ce_{0.9}O_{1-X}$) for low-temperature SOFC electrolytes because it has higher ionic conductivity than YSZ at low temperature. However, open circuit voltage with using GDC ($Gd_{0.1}Ce_{0.9}O_{1-X}$) electrolyte in SOFCs, becomes lower than using YSZ (8 mol% Yttria stabilized Zirconia) electrolyte because GDC has electronic conductivity. In this work, the effect of changing GDC electrolyte thickness on the open circuit voltage has been investigated. Ni-GDC anode-supported unit cells were fabricated as follows. Mixed NiO-GDC powders were pressed and pre-sintered at $1200^{\circ}C$. And then, GDC electrolyte material was dip-coated on the anode and sintered at $1400^{\circ}C$. Finally the LSCF-GDC cathode material was screen-printed on the electrolyte and sintered at $1000^{\circ}C$. Electrolyte thickness was controlled by the number of dip-coating times. Open circuit voltage was measured depending on electrolyte thickness at $650^{\circ}C$ and found that the thicker GDC electrolyte was, the better OCV was.

• 한국세라믹학회지
• /
• 제35권3호
• /
• pp.273-279
• /
• 1998

Unite cell of soid oxide fuel cell (SOFC) that consists of a dense yttria-stabilized zirconia(YSZ) electrolyte a porous nickel-YSZ cermet anode and a porous strontium- doped lanthanum manganate(LSM) cathod was fabricated from using pore former through co-firing technique. Initial sintering shrinkage rates of each layer were identified for fabricating SOFC. Heterogenous sintering was very effective in tailoring shrinkage rate for three layers. The powder tailoring necessary for shrinkage rate matching are as follows ; electrolyte of 60% TZ8YS/ 40% TZ8Y mixture anode of 51wt% NiO/49 wt% (70wt% TZ8YS/30 wt% UT ZrO2) mixture and cathode of 80% LSM/20% UT ZrO2 mixture . The overall sintering shrinkage rate differences of three layers using these compositions were maintained in a few percent.