• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.173-177
• /
• 2008

We have developed the transparent passivation layer for top emission organic light emitting diodes using CsCl thin film by the thermal evaporation method. The CsCl film was deposited on the Ca/Ag semitransparent cathode. The optical transmittance of Ca/ Ag/CsCl triple layer is higher than that of Ca/Ag double layer in the visible range. The device with a structure of glass/Ni/2-TNATA/a-NPD/Alq3:C545T/BCP/Alq3/Ca/Ag/CsCl results in higher efficiency than the device without CsCl passivation layer. The device without CsCl thin film shows a current efficiency of 7 cd/A, whereas the device passivated with CsCl layer shows an efficiency of 10 cd/A. This increase of efficiency isresulted from the increased optical extraction by the CsCl passivation layer.

• Journal of Powder Materials
• /
• v.19 no.5
• /
• pp.338-342
• /
• 2012

A novel chemical method was evaluated to fabricate the ultrafine tungsten heavy alloy powders with bater-base solution made from the ammonium metatungstate (AMT), iron(II) chloride tetrahydrate ($FeCl_2{\cdot}4H_2O$), nickel(II) chloride hexahydrate ($NiCl_2{\cdot}6H_2O$) as source materials and the sodium tungstate dihydrate ($NaWO_4{\cdot}2H_2O$) as Cl-reductant. In the preparation of mixtures the amounts of the source components were chosen so as to obtain alloy of 93W-5Ni-2Fe composition(wt.%). The obtained powders were characterized by X-ray diffraction, XRF, field-emission scanning microscope (FESEM), and chemical composition was analyzed by EDX.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.1
• /
• pp.61-65
• /
• 1997

The electrochemical properties of LixCoyNi1-yO2 compounds (y=0.1, 0.3, 0.5, 0.7, 1.0) prepared by citrate sol-gel method have been investigated. The LixCoyNi1-yO2 compounds were annealed at 850 ℃ for 20 h after preheating at 650 ℃ for 6 h, in air. The x-ray diffraction (XRD) patterns for LixCoyNi1-yO2 have shown that these compounds have a well developed layered structure (R&bar{3} m). From the scanning electron microscopy of LixCoyNi1-yO2, particle size was estimated less than 5 μm. The Li//LixCoyNi1-yO2 electrochemical cell consists of Li metal anode and 1 M LiClO4-propylene carbonate (PC) solution as the electrolyte. The differences in intercalation rate of the LixCoyNi1-yO2 in the first charge/discharge cycle were less than 0.05 e-. The first discharge capacities of LixCoO2 and LixCo0.3Ni0.7O2 were ∼130 mAh/g and ∼160 mAh/g, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2416-2418
• /
• 2010

• BMB Reports
• /
• v.30 no.6
• /
• pp.379-384
• /
• 1997

The effects of several ions on the specific activity and isozyme patterns of cellular and secretory isoperoxidases were studied in suspension-cultured cells of rice (Oryza sativa L.). Peroxidase release into the culture medium occurred in the absence of added calcium. The addition of calcium ion greatly stimulated the secretion of cationic isoperoxidases such as C2 and C3 into the medium: a maximum 11 fold increase of secretions occurred in the presence of 5 mM $CaCl_2$, and the secretion was accomplished within 1 hour after the addition of $CaCl_2$. About a 10 fold increase of the peroxidase secretion into the medium did occur with 0. 5% NaCl, whereas cellular isoperoxidase levels were reduced notably. About a 6 fold increase of the specific activity of cellular isoperoxidase was found in 5 mM $NiCl_2$-treated cell, while $NiCl_2$ had no effect on the secretion of peroxidase into the medium. Various concentrations of KCl did not change peroxidase secretion, but 5 mM $ZnCl_2$ reduced peroxidase secretion greatly. The major secretory isoperoxidases stimulated by $CaCl_2$, NaCl and cellulase were composed of cationic isoperoxidases C2 and C3, which were found to be localized in the cell wall of rice by examination of the enzyme in the protoplast. Furthermore, the secretion rates of secretory isoperoxidases were increased rapidly when cellulase was treated in the absence of the osmotic stabilizer of 0.4 M mannitol. These results suggest that the stimulations of secretory isoperoxidase levels seem to be due to the stimulation of secretion into the culture medium of rice.

• Journal of Sensor Science and Technology
• /
• v.6 no.1
• /
• pp.24-34
• /
• 1997

In this study, two different types of complementary electrochromic devices using amorphous $WO_{3}$ films as a working electrode, $V_{2}O_{5}$ film and NiO film as counter electrodes respectively were investigated. For the devices using amorphous and crystalline $V_{2}O_{5}$ films of $100{\sim}150nm$ thickness with $ITO/WO_{3}/LiClO_{4}-PC/V_{2}O_{5}/ITO$ structure, an optical modulation of $50{\sim}60%$ were obtained at a potential range of $1{\sim}2V$. It has been shown that transmittance and reflectance of light could be electrically controlled by low applied voltage. For the devices with $ITO/WO_{3}/LiClO_{4}-PC/NiO/ITO$ structure in which NiO film was deposited by a RF reactive sputtering, the optical modulation in visible light region (${\lambda}=550nm$) and in near infrared light region (${\lambda}=850nm$) were 25% and 30%, respectively.

• Corrosion Science and Technology
• /
• v.4 no.4
• /
• pp.121-129
• /
• 2005

Basic design concept of the future steel structure requires environmental compatibility and maintenance free capability to minimize economic burdens. Recent trends in alloy design for advanced weathering steel include addition of various alloying elements which can enhance formation of stable and protective rust layer even in polluted urban and/or high $Cl^{-}$ environment. The effects of Ca, Ni, W, and Mo addition on the corrosion property of Ca-modified weathering steel were evaluated through a series of electrochemical tests (pH measurement and electrochemical impedance spectroscopy: EIS) and structural analysis on rust layer formed on the steel surface. Ca-containing inclusions of Ca-Al-Mn-O-S compound are formed if the amount of Ca addition is over 25 ppm. Steels with higher Ca content results in higher pH value for condensed water film formed on the steel surface, however, addition of Ni, W, and Mo does not affect pH value of the thin water film. The steels containing a high amount of Ca, Ni, W and Mo showed a dense and compact rust layer with enhanced amount of ${\alpha}-FeOOH$. Addition of Ni, W and Mo in Ca-modified weathering steel shows anion-selectivity and contributes to lower the permeability of $Cl^{-}$ ions. Effect of each alloying element on the formation of protective rust layer will be discussed in detail with respect to corrosion resistance.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.1 s.25
• /
• pp.116-124
• /
• 1989

To assay the cytogenetic toxicity of $NiCl_2,\;K_2Cr_2O_7CdCl_2,\;and\;HgCl_2$, the frequencies of sister chromatid exchanges(SCEs) and chromosomal aberrations were observed in the metaphase chromosomes of the human lymphocytes which were cultured with above materials. The frequencies of SCEs are dose-dependently increased by all materials in this experiment. Chromosomal aberrations, especially gap and break, are increased by the nickel and chromic compounds, while not significantly increased by the cadmium and mercurial compounds. This results indicate the dose dependent relationship between the frequencies of SCEs and the concentrations of the heavy metals, but the increasing rates of the SCEs induced by the heavy metals are less sensitive than other mutagens or carcinogens which were confirmed.

• Korean Journal of Microbiology
• /
• v.20 no.3
• /
• pp.105-112
• /
• 1982

The strain of Aspergillus, 6368A, producing acid protease showing high activity was isolated from soil, as a result of wide research about mold group. This strain was identified as a species of Aspergillus tubingensis by the investigation of morphological characteristics. The change of the enzyme production under the various media and culture condition was also studied. The optimum pH and stability of crude acid protease are 2.5, 2.0~4.5 and the optimum temeprature and thermal inactivation waas shown $50^{\circ}C,\;55^{\circ}C$, respectively. From the result of the study on the effects of metal ions, it was found that $MnCl_2,\;CoCl_2,\;CuCl_2,\;SrCl_2,\;and\;NiCl_2$ slightly increased the enzyme activity, on the other hand $ZnCl_2,\;CaCl_2,\;MgCl_2,\;SLS,\;and\;KMnO_4$ decreased it.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1757-1762
• /
• 2006

A solvent sublation using salphen as a ligand was studied and applied for the determination of trace Ni(II), Co(II) and Cu(II) in water samples. The fundamental study was investigated by a solvent extraction process because the solvent sublation was done by extracting the floated analytes into an organic solvent from the aqueous solution. The salphen complexes of Ni(II), Co(II) and Cu(II) ions were formed in an alkaline solution of more than pH 8 and then they were extracted into m-xylene. It was known that the each metallic ion formed 1 : 1 complex with the salphen and the logarithmic values of extraction constants for the complexes were 3.3 5.1 as an average value. Based on the preliminary study, the procedure was fixed for the separation and concentration of the analytes in samples. Various conditions such as the pH of solutions, the influence of $NaClO_4$, the bubbling rate and time of $N_2$ gas, and the type of organic solvent were optimized. The metal-salphen complexes could be extracted into m-xylene from the solution of more than pH 8, but the pH could be shifted to acidic solution of pH 6 by the addition of $NaClO_4$. In addition, the solvent sublation efficiency of the analytes was increased by adding $NaClO_4$. The recovery of 97-115% was obtained in the spiked samples in which given amounts of 0.3 mg/L Ni(II), 0.8 mg/L Co(II) and 0.04 mg/L Cu(II) were added.