• Korean Journal of Materials Research
• /
• v.30 no.8
• /
• pp.383-392
• /
• 2020

In this paper, AgCl/Ag₃PO₄/diatomite photocatalyst is successfully synthesized by microemulsion method and anion in situ substitution method. X-ray diffraction (XRD), photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and ultraviolet-visible spectroscopy (UV-Vis) are used to study the structural and physicochemical characteristics of the AgCl/Ag₃PO₄/diatomite composite. Using rhodamine B (RhB) as a simulated pollutant, the photocatalytic activity and stability of the AgCl/Ag₃PO₄/diatomite composite under visible light are evaluated. In the AgCl/Ag₃PO₄/diatomite visible light system, RhB is nearly 100 % degraded within 15 minutes. And, after five cycles of operation, the photocatalytic activity of AgCl/Ag₃PO₄/diatomite remains at 95 % of the original level, much higher than that of pure Ag₃PO₄ (40 %). In addition, the mechanism of enhanced catalytic performance is discussed. The high photocatalytic performance of AgCl/Ag₃PO₄/diatomite composites can be attributed to the synergistic effect of Ag₃PO₄, diatomite and AgCl nanoparticles. Free radical trapping experiments are used to show that holes and oxygen are the main active species. This material can quickly react with dye molecules adsorbed on the surface of diatomite to degrade RhB dye to CO₂ and H₂O. Even more remarkably, AgCl/Ag₃PO₄/diatomite can maintain above 95 % photo-degradation activity after five cycles.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.175-175
• /
• 2016

Sn도금액은 강산에서는 $Sn^{2+}$, 강알칼리에서는 $Sn^{4+}$석출이 안정하다. 중성영역은 도금액에 $Sn^{2+}$침전을 방지하기 위하여 착화제가 필요하다. 기록에 남아 있는 가장 오래된 Sn도금은 1856년 Gore가 4가의 주석산염을 사용한 알칼리성용액이다. 그 후 50~60년 사이에 2가의 염화주석($SnCl_2$)과 KOH에 Cyan 등의 착화제를 첨가한 도금액이 발표되었다. 최초의 실용적인 알칼리주석용액은 1931년 Oplinger의 4가 주석산 염으로서, $CH_3COONa$를 완충제로 사용하였고, $Sn^{2+}$을 산화시키기 위하여 과산화물이나 과 붕산염을 첨가하였다. 알칼리성 Sn용액은 Natrium용액과 Kalium용액이 있지만, Kalium염이 용해성이 좋고, Sn농도를 높여 전류밀도를 높일 수 있다. 알칼리성용액은 도금속도가 산성용액의 1/2로 되고, 음극효율도 80~90% 정도 낮아, 두꺼운 피막이나 생산성을 중시하는 부품에는 적합하지 않다. 초기의 산성용액은 Sn의 정련목적으로 사용되었고, Pb정련에 사용된 Fluor규산용액에 Gelatine을 첨가하였다. Mathers는 Cresol산을 첨가하여 미량의 Cresol포화용액을 사용하여 고속으로 두껍게 석출시킬 수 있었다. 독일의 Schloetter도 다양한 방향족 술폰산으로써 반 광택피막을 실현하였다. 산성Sn도금액은 첨가제에 어떠한 유기화합물을 사용하는가는 도금장치나 석출상태로써 결정할 수 있다. Hothersall과 Bradshaw는 Cresol술폰산을 첨가하여 도금액 안정성 향상을 발견했다. Cresol술폰산은 $Sn^{2+}$의 안정제이며, Gelatine은 분산제기능을 한다. 붕 불화용액은 Sn농도를 높일 수 있고, $2{\sim}12A/dm^2$의 고 전류밀도의 도금이 가능하다. 1937년 Schloetter가 개발하여 미국의 제철회사에서 사용되었다. Sn-Ni도금은 Ni도금보다도 뛰어난 내식성이 있기 때문에 자전거, 자동차부품에 사용되고 있다. 실용도금액은 1951년 Parkinson이 발표한 HBF/HCL용액이다. $SnCl_2$산성용액에서 표준전위는 -0.136V인데 비하여, Ni이온의 표준전위는 -0.25V이다. HF용액에서는 불화물이온이 $Sn^{2+}$의 석출전위를 (-)방향으로 이동시켜서 합금석출이 가능하다. Sn-Co도금은 Cr도금의 색조에 가깝고, 장식목적으로 사용된다. Cr도금 대체용으로 사용된다. 내마모성이나 내식성은 Cr도금보다도 떨어지기 때문에 장식목적에 한정된다. 1953년 Parkinson은 Sn-Ni도금연구에서 동일한 용액조성으로부터 Co 30%를 석출시켰다. Sn-Zn도금은 방식도금으로서 자동차부품에 많이 사용되고 있다. Sn과 Zn의 표준전위는 서로 멀리 떨어져 있기 때문에 산성용액에서는 공석될 수 없다. 1980년대에 들면서, 방식Cd(Cadmium)도금의 독성 때문에 Sn-Zn도금을 재인식 하게 되었다. 1957년 Vaid 등이 No Cyan도금액을 발표했다. 그 후 러시아의 연구자가 안정한 도금액을 연구하였고, Srivastava와 Muckergee가 1976년에 종합하였다.

• Journal of the Korean Chemical Society
• /
• v.54 no.5
• /
• pp.515-522
• /
• 2010

A relation between antimicrobial activities and the formation constants of solid complexes of Cu(II), Ni(II), Co(II), Mn(II) and Fe(III) with tridentate Schiff base ligand, 4-hydroxy-3(1-{2-(benzylideneamino)-phenylimino}-ethyl)-6-methyl-2Hpyran-2-one (HL) derived from o-phenylene diamines, dehydroacetic acid (DHA) and p-chloro benzaldehyde have been studied. The ligand and metal complexes were characterized by elemental analysis, conductivity, magnetic susceptibility, thermal analysis, X-ray diffraction, IR, $^1H$-NMR, UV-vis and mass spectra. From the analytical data, the stiochiometry of the complexes was found to be 1:2 (metal:ligand) with octahedral geometry. The molar conductance values suggest the nonelectrolytic nature of metal complexes. The X-ray diffraction data suggests monoclinic crystal system for Ni(II) and orthorhombic crystal system for Cu(II) and Co(II) complexes. The IR spectral data suggest that the ligand behaves as tridentate ligand with ONN donor atoms sequence towards central metal ion. Thermal behavior (TG/DTA) and kinetic parameters calculated by Coats-Redfern method suggests more ordered activated state in complex formation. The protonation constants of the complexes were determined potentiometrically in THF:water (60:40) medium at $25^{\circ}C$ and ionic strength ${\mu}=0.1\;M$ ($NaClO_4$). Antibacterial activities in vitro were performed against Staphylococcus aureu and Escherichia coli. Antifungal activities were studied against Aspergillus Niger and Trichoderma. The effect of the metal ions and stabilities of complexes on antimicrobial activities are discussed.

• Korean Journal of Microbiology
• /
• v.27 no.4
• /
• pp.357-365
• /
• 1989

Induction conditions for autolysis and autoplast formation of thermophilic Clostridium thermohydrosulfuricum were studied. The cells in the initial exponential growth phase were well autolysed in Tris-HCl buffer or inorganic buffers containing univalents, such as $K^{+}$ and $Na^{+}$ , and chemicals such as cysteine-HCl, sorbitol and glycerol. Meanwhile, autolysis induction was slightly inhibited by divalents, such as $Mg^{2+}, Mn^{2+}, Ca^{2+}, Ni^{2+}$, and strongly by divalents, such as $Fe^{2+}, Cu^{2+}$ and citric acid. The autolysis was stimulated when the cells were grown in the medium containing ampicillin that inhibites cell wall synthesis, meanwhile, it was slightly inhibited by nucleic acids and protein synthesis inhibitors. The optimal pH and temperature for the induction of autolysis were 7.5 and $60^{\circ}C$, respectively. On the other hand, the cells were autoplasted without lysozyme treatment during autolysis due to the stabilization of protoplasmic membrane in the presence of divalents such as $Mg^{2+}, Mn^{2+}, Ca^{2+}, Ni^{2+}$. Autoplast formation was mostly induced at $37^{\circ}C$ in 50mM Tris-HCl buffer (pH 7.5) containing 20 mM $MgCl^{2}$ and 0.3 M glycerol, and in the late exponential growth phase growing cell.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.259-269
• /
• 2021

The effects of the physicochemical properties of soil such as soil pH, cation exchange capacity, and organic matter content on single extraction of Cd, Cr, Cu, Ni, Pb, and Zn using CaCl2, HOAc, HNO3, and DTPA were statistically investigated for 69 agricultural soils in Korea. Correlation analysis and multiple regression analysis were applied for soil samples which were grouped on the basis of average values of the physicochemical properties of the soil. Diluted HNO3 extracted higher concentrations of Cr, Cu, Ni, and Pb when compared with the other extractants, however, similar amounts of Cd and Zn were extracted by HOAc with HNO3. The results of correlation analysis indicated that DTPA extraction showed a high correlation with other single and pseudo-total extraction methods, and the physicochemical properties of soil influenced the concentrations of heavy metals leached by the single extraction methods. In the case of Zn, high correlations between pseudo-total and the studied single extraction methods were observed. As a result of regression analysis, it was found that the physicochemical properties of the soil could explain up to 74% of variances of the single extraction results. These results indicate that the physicochemical properties of the soil can have a direct influence on the concentrations of heavy metals extracted by the single extraction methods.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.4
• /
• pp.321-326
• /
• 1999

This study was performed to evaluate the quality of produced compost and to analyse the change of a component during the reduction compost according to the input volume. The volume of pilot scale used in this study was about 300㎥. The pile of 2m width, 20m length and 1.2m height was constructed. Woodchip was used as bulking agent to enhance pore volume of composting bay and to control water content of food waste in starting time. Food waste was turned using a mechanical tumer twice a day. The result are as follows : In these cases of input volume of $2m^3$ and $3.5m^3$, temperature of composting pile was maintained over $60^{\circ}C$ and water content was 43.6% and 47.2%, respectively. It was proved that microorganisms activity was maintained high in each input volume. After operation of step 1 and step 2, pH and organic matter in the final compost were 6.2, 6.6 and 84.3%, 79.6%, respectively. Cation concentration such as $K_2O,$ CaO and NaCl was accumulated in the compost during the composting period. NaCl concentration in the final compost was 4.62%, 4.92%, respectively. Hence, If was recommended that this compost should be applied to others expect agricultural area or mixed with a low concentration other compost. In the steps 1, input volume of $2m^3$, heavy metal concentration of Pb, Cu, Cr, Ni. Cd were 37.82㎎/㎏, 56.87㎎/㎏, 9.8㎎/㎏. 22.21㎎/㎏ and 3.69㎎/㎏, and 44.55㎎/㎏, 95.54㎎/㎏, 12.22㎎/㎏, 24.94㎎/㎏, and 3.86㎎/㎏ in the step 2.

• Economic and Environmental Geology
• /
• v.42 no.6
• /
• pp.549-559
• /
• 2009

The objectives of this study are to investigate the biomineralization of goethite and lepidocrocite formed on the twisted-stalk and the sheathed-filament structure that is suggest microbe origin, and heavy metal in the yellow Fe-hydroxide. On the ratio of Cl and the Cl/Br ratios that are a pollution and non-pollution of groundwaters, it is indicated that the groundwater in this areas were relatively contaminated by human activity. The composition of the yellow Fe-hydroxide consisted mainly of $Fe_2O_3$ and $SiO_2$. The content of $Fe_2O_3$ ranges from 58.57 wt.% to 75.7 3wt.%, and $SiO_2$ content ranges from 5.8 wt.% to 16.17 wt.%. Heavy metal elements such as Zn(max. 6,160 mg/kg), Pb(max. 377 mg/kg), U(max. 503 mg/kg), Cr(max. 203 mg/kg), Cu(max. 77 mg/kg), V(max. 162 mg/kg), Ni(max. 105 mg/kg) were observed to be rich in those yellow Fe-hydroxide. The lath and platy crystals and needle-shaped crystals were clearly observed on the twisted-stalks and sheathed-filaments structure. The goethite, gypsum, and lepidocrocite were identified in the yellow Fe-hydroxide by x-ray powder diffraction.

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.297-304
• /
• 1998

The three analysis methods, EPA method 3050, the method offered by Ministry of Environment in Korea, and modified method corrected in this laboratory, were studied to investigate the effect of matrix on the analysis of inorganic priority pollutants. 7 inorganic priority pollutants(Ni, Cr, Cu, Zn, Pb, Cd, Hg) were spiked to the plating, leather, paper, electric, and dye sludges. Mean recovery of the elements except Hg was 95.5% when the procedure of EPA method was applied. However, recovery by the two other extraction methods showed 11.1% and 27.7%, respectively. Digestions were done by MDS (microwave digestion system) and $HNO_3+HClO_4$ methods. To study organic and inorganic matrix effect, samples were made by adding triethanol amine as a organic matrix and $FeCl_3{\cdot}6H_2O$+$AlCl_3{\cdot}6H_2O$ as a inorganic matrix, respectively. The extracts were analyzed by AAS and HG-AAS. Mean recovery of the elements by the $HNO_3+HClO_4$ procedure, except Hg, gave better result than that of the MDS method. Mean recovery of elements was decreased when organic and inorganic matrices were added in the sludge samples. The procedure of MDS and $HNO_3+HClO_4$ digestion gave higher recoveries than that of direct analysis. In general, the results of the studies showed a significant matrix effect on the inorganic priority pollutants analysis in sludges.

• Clean Technology
• /
• v.20 no.3
• /
• pp.269-276
• /
• 2014

This study was aimed to develop catalytic system for the dry-based reduction of oxidized mercury ($Hg^{2+}$) to elemental mercury ($Hg^0$) which is one of the most important components comprising mercury continuous emission monitoring system (Hg-CEMS). Based on the standard potential in oxidation-reduction reaction, transition metals including Fe, Cu, Ni and Co were selected as possible candidates for catalyst proceeding spontaneous reduction of $Hg^{2+}$ into $Hg^0$. These transition metal catalysts revealed high activity for reduction of $Hg^{2+}$ into $Hg^0$ in the absence of oxygen in reactant gases. However, their activities were greatly decreased in the presence of oxygen, which was attributed to the transformation of transition metals by oxygen to the corresponding transition metal oxides with less catalytic activity for the reduction of oxidized mercury. Hydrogen supplied to the reactant gases significantly enhanced $Hg^{2+}$ reduction activity even in the presence of oxygen. It might be due to occurrence of combustion reaction between $H_2$ and $O_2$ causing the consumption of $O_2$ at such high reaction temperature at which oxidized mercury reduction reaction took place. Because the system showed high activity for $Hg^{2+}$ reduction to $Hg^0$, which was compatible to that of wet-chemistry technology using $SnCl_2$ solution, the catalytic reduction system of Fe catalyst with the supply of $H_2$ could be employed as a commercial system for the reduction of oxidized mercury to elemental mercury.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.173-178
• /
• 2000

A new open-chain ligand containing two phenol groups, 1, 14-Bis (2-hydroxybenzyl)-2, 6, 9, 12-tetraazatetradecane(bsated) was synthesized as its tetrahydrochloride salt and characterized by elemental analysis, mass, infrared and NMR. Its proton dissociation constants ($logK^n{_H}$) and stability constants ($logK_{ML}$) toward $Co^{2+}$, $Ni^{2+}$, $Cu^{2+}$ and $Zn^{2+}$ were determined at $25^{\circ}C$ and 0.10M($KNO_3$) ionic strength in aqueous solution by potentiometry. The X-ray structure of its copper (II) complex [Cu(bsated)]$(ClO_4)_2$ was reported: Monoclinic space group $P2_1/n$, $a=17.856(4){\AA}$, $b=17.709(1){\AA}$, $c=8.539(2){\AA}$, $V=2700(2){\AA}$ with Z=4. Electrochemical studies of [Cu(bsated)]$(ClO_4)_2$ complex in dimethyl sulfoxide (DMSO) solution containing tetrabutylammonium perchlorate (supporting electrolyte) were carried out by cyclic voltammograms (CV) and normal pulse voltammetry (NPV).