• Korean Journal of Environmental Agriculture
• /
• v.24 no.2
• /
• pp.106-116
• /
• 2005

This experiment was conducted to investigate available extraction capacity and potential mobility of heavy metal according to the distribution property and contamination level of heavy metals in soils and to suggest a reform measure of soil environment assessment methodology applied with soil quality and the official soil heavy metal test methods in domestic and foreign countries. The soils were collected from the natural forest paddy with long-term application of same type fertilizer, and paddies near metal mine and industrial complex. The post-treatment methods of soil were partial extraction, acid digestion and sequential extraction methods. For the heavy metal contents with different soil properties, it was shown that their natural forest and paddy soil were slightly low and similar to the general paddy soil, while their paddies near metal mine and industrial complex were higher than the standard level of Soil Environment Protection Act. Heavy metal concentrations in the soils with different soil properties had difference between $HNO_3\;and\;HNO_3+HCl$ extractant by US-EPA 3051a method. There were highly significant positive relationships in both two methods. It was appeared that the higher extractable concentration ratio with 0.1N-HCl to total heavy metal content with $HNO_3+HCl$ extractant the greater total heavy metal content. There were highly significant positive correlationship between total heavy metal content and extractable content with 0.1N-HCl. For extractable capacity of soil extractable solution compared to the total heavy metal content it was appeared that it extractable method with 0.1N-HCl was higher than those with EDTA and DTPA. In extractable ratio with 0.1N-HCl in the contaminated paddy soils near mine and industrial complex, it was shown that the lower soil pH, the higher total heavy metal content. The order of a potential mobility coefficient by distribution of heavy metal content with ie different typies in the soil was Cd>Ni>Zn>Cu>Pb. It could be known that contamination characteristics of heavy metals with different types of soils were affected by different heavy metal components, contamination degree and soil chemical properties, and heavy metal concentration with different extractable methods had great variations with adjacent environment. To be compared with assessment methodology of soil environment impact at domestic and foreign countries with our results, it might be considered that there was necessary to make a single analysis method based on total heavy metal content with environmental overloading concept because of various analysis methods for total heavy metal content and present analysis method with great variation according to soil environment. In spite of showing higher concentration of heavy metal with acidic digestion than the extractable method, it might be considered that there is need to be adjusted the national standard of soil heavy metal contamination.

• Journal of Food Hygiene and Safety
• /
• v.27 no.2
• /
• pp.152-160
• /
• 2012

The objective of this study was to analyze hazards for the growing stage of 6 tomato farms (A, B, C; soli farms, D, E, F; Nutriculture farms) located in Gyeongsangnam-do to establish the good agricultural practices (GAP). A total of 144 samples for analyzing hazards collected from cultivation environments (irrigation water, soil, nutrient solution, and air) and personal hygiene (hands, gloves, and cloths) were assessed for biological (sanitary indications and major food borne pathogens) and chemical hazards (heavy metals). Total bacteria, coliform, and fungi were detected at levels of 0.2-7.2, 0.0-6.1, and 0.0-5.4 log CFU/g, mL, hand or 100 $cm^2$, respectively. Escherichia coli were only detected in the soil sample from B farm. In case of pathogens, Bacillus cereus was detected at levels of 0.0-4.4 log CFU/(g, mL, hand or 100 $cm^2$), whereas Staphylococuus aureus, Listeria monocytogenes, E. coli O157, and Salmonella spp. were not detected in all samples. Heavy metals as a chemical hazard were detected in soil and irrigation water, but levels of them were lower than the permit limit. In conclusion, chemical hazard levels complied with GAP criteria, but biological hazards at the growing stage of tomato farms were confirmed. Therefore a proper management to prevent microbial contamination is needed.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.3
• /
• pp.170-177
• /
• 2004

Agroenvironmental characteristics in paddy fields irrigated with the water of Nagdong river were analyzed along the river watershed for two years from 1999. The sites monitored from upper reaches of the river were Andong, Sangju, Gumi, Goryeong, Changnyeong, Milyang and Pusan. In paddy soils, the contents of heavy metals such as Cd, Cr, Cu, Pb, Ni, Zn and As were around natural values showing the highest values in Pusan followed by Goryeong. In brown rice, the contents of heavy metals were lower than natural values. Soil chemical properties appeared higher values in the lower reaches including Goryeong than the upper ones. The highest parameters in Goryeong were pH ($5.9{\sim}6.1$), EC ($0.8{\sim}0.9\;dS/m$), $Av.P_2O_5$ ($155{\sim}201\;mg/kg$), exchangeable Ca ($6.7{\sim}7.4\;cmol^+/kg$), Mg ($1.92{\sim}2.50\;cmol^+/kg$), K ($0.18{\sim}0.21\;cmol^+/kg$) and those in Pusan were organic matter ($23.0{\sim}29.1\;g/kg$) and T-N ($1.6{\sim}1.8\;mg/kg$). In conclusion, the recommended rates of N fertilizer for rice cropping were 21.4%, 11.8% and 8.8% high for Andong, Sangju and Gumi, respectively and 14.9%, 4.6%, 4.5% and 11.5% low for Goryeong, Changnyeong, Milyang and Pusan, respectively reflecting the chemical properties of soils and the quality of irrigation water on the basis of 110 kgN/ha. In the case of phosphorous, the rates were 18.9% and 33.3% low for Changnyeong and others, respectively on the basis of $45\;kgP_2O_5/ha$. The populations of bacteria, fungi, actinomycetes, Bacillus, fluorescent Pseudomonas and Biomass C were high at the lower reaches including Goryeong, which showed relatively much nutrient contents of organic matter, total N and phosphorous etc.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1998.10a
• /
• pp.2-4
• /
• 1998

Proliferation of Nocardia amarae cells in activated sludge has often been associated with the generation of nuisance foams. Despite intense research activities in recent years to examine the causes and control of Nocardia foaming in activated sludge, the foaming continued to persist throughout the activated sludge treatment plants in United States. In addition to causing various operational problems to treatment processes, the presence of Nocardia may have secondary effects on the fate of heavy metals that are not well known. For example, for treatment plants facing more stringent metal removal requirements, potential metal removal by Nocardia cells in foaming activated sludge would be a welcome secondary effect. In contrast, with new viosolid disposal regulations in place (Code o( Federal Regulation No. 503), higher concentration of metals in biosolids from foaming activated sludge could create management problems. The goal of this research was to investigate the metal sorption property of Nocardia amarae cells grown in batch reactors and in chemostat reactors. Specific surface area and metal sorption characteristics of N. amarae cells harvested at various growth stages were compared. Three metals examined in this study were copper, cadmium and nickel. Nocardia amarae strain (SRWTP isolate) used in this study was obtained from the University of California at Berkeley. The pure culture was grown in 4L batch reactor containing mineral salt medium with sodium acetate as the sole carbon source. In order to quantify the sorption of heavy metal ions to N amarae cell surfaces, cells from the batch reactor were harvested, washed, and suspended in 30mL centrifuge tubes. Metal sorption studies were conducted at pH 7.0 and ionlc strength of 10-2M. The sorption Isotherm showed that the cells harvested from the stationary and endogenous growth phase exhibited significantly higher metal sorption capacity than the cells from the exponential phase. The sequence of preferential uptake of metals by N. amarae cells was Cu>Cd>Ni. The specific surFace area of Nocardia cells was determined by a dye adsorption method. N.amarae cells growing at ewponential phase had significantly less specific surface area than that of stationary phase, indicating that the lower metal sorption capacity of Nocardia cells growing at exponential phase may be due to the lower specific surface area. The growth conditions of Nocardia cells in continuous culture affect their cell surface properties, thereby governing the adsorption capacity of heavy metal. The comparison of dye sorption isotherms for Nocardia cells growing at various growth rates revealed that the cell surface area increased with increasing sludge age, indicating that the cell surface area is highly dependent on the steady-state growth rate. The highest specific surface area of 199m21g was obtained from N.amarae cell harvested at 0.33 day-1 of growth rate. This result suggests that growth condition not only alters the structure of Nocardia cell wall but also affects the surface area, thus yielding more binding sites of metal removal. After reaching the steady-state condition at dilution rate, metal adsorption isotherms were used to determine the equilibrium distributions of metals between aqueous and Nocardia cell surfaces. The metal sorption capacity of Nocardia biomass harvested from 0.33 day-1 of growth rate was significantly higher than that of cells harvested from 0.5- and 1-day-1 operation, indicatng that N.amarae cells with a lower growth rate have higher sorpion capacity. This result was in close agreement with the trend observed from the batch study. To evaluate the effect of Nocardia cells on the metal binding capacity of activated sludge, specific surface area and metal sorption capacity of the mixture of Nocardia pure cultures and activated sludge biomass were determined by a series of batch experiments. The higher levels of Nocardia cells in the Nocardia-activated sludge samples resulted in the higher specific surface area, explaining the higher metal sorption sites by the mixed luquor samples containing greater amounts on Nocardia cells. The effect of Nocardia cells on the metal sorption capacity of activated sludge was evaluated by spiking an activated sludge sample with various amounts of pre culture Nocardia cells. The results of the Langmuir isotherm model fitted to the metal sorption by various mixtures of Nocardia and activated sludge indicated that the mixture containing higher Nocardia levels had higher metal adsorption capacity than the mixture containing lower Nocardia levels. At Nocardia levels above 100mg/g VSS, the metal sorption capacity of activate sludge increased proportionally with the amount of Noeardia cells present in the mixed liquor, indicating that the presence of Nocardia may increase the viosorption capacity of activated sludge.

• Journal of Wetlands Research
• /
• v.6 no.1
• /
• pp.133-147
• /
• 2004

Environmental quality(water and sediment) was analyzed in the tidal flat of Saemangum of Jeonbuk Province, the west coast of Korea, using the 101 sediment samples and 69 water samples collected in September 4~13, 2001. Major water quality parameters with the means of 69 surface water samples are as follows; $25.51{\pm}0.68^{\circ}C$ for water temperature, $29.88{\pm}5.01$ for salinity, $1.40{\pm}0.78mg/L$ for COD, $0.352{\pm}0.417mg/L$ for DIN, and $0.027{\pm}0.023mg/L$ for phosphate, respectively. Higher values were found at the subestuary of Dongjin and Mangyung River, and lower values at the Saemangum embayment and Gomso Bay. There was a significant negative correlation between salinity and the other water quality parameters(p<0.0001) such as COD, nutrients, SS and N/P. This correlation suggested that the major pollution sources be from terrestrial inputs through tributaries in this area. Principal component analysis clearly revealed a spatial variation of water quality; stations with higher values of nutrients and COD located subestuary of tributaries. 14 sediment quality parameters including 8 trace metals were measured using the 101 surface sediment samples. Average values for the parameters are as follows; Al $2.28{\pm}0.92%$, Cd $0.61{\pm}0.27ppm$, Cu $8.95{\pm}4.06ppm$, Fe $1.19{\pm}0.37%$, Mn $182.31{\pm}77.45ppm$, Ni $10.83{\pm}4.97ppm$, Pb $15.20{\pm}4.35ppm$, Zn $41.34{\pm}34.62ppm$, COD $2.68{\pm}1.85mg/g\;dry$, AVS $0.04{\pm}0.08mg/g\;dry$, IL $1.29{\pm}1.08%$, water content $24.11{\pm}4.49%$, TN $0.02{\pm}0.02%$, TC $0.22{\pm}0.30%$. Spatial variations of sediment quality were not clear as water quality. Some higher values were found at the subestuary of Gum River and lower values at the other area. There was a significant positive correlation between the heavy metal concentrations and organic materials within the sediment(p<0.05). Enrichment factors showed the ranges of 1~2 for most of the metals in the sediment except zinc(1~6), indicating no serious exogenous input of heavy metals in the study area. Also, the heavy metal concentrations in the sediment were within the ranges found at the natural marine environments.

• Analytical Science and Technology
• /
• v.23 no.5
• /
• pp.485-491
• /
• 2010

A certified reference material (CRM) of KRISS 109-03-SSD was developed for the analysis of hazardous elements in soil. The target elements were As, Cd, Cr, Cu, Hg, Ni, Pb, Zn being regulated by the Soil Environment Conservation Act. Starting material was collected from tailing dump of an unworked tungsten mine at Sangdong (Gangwon-do, Korea). The starting material under-went through a series of fabricating process steps of screening, drying, grinding, sieving, blending, bottling, sterilization and was certified according to the ISO Guide 35. Isotope dilution-inductively coupled mass spectrometry (ID-ICP/MS) and instrumental neutron activation analysis (INAA) were used for the measurement. Homogeneity was tested according to ISO 13528 annex B. The certified values were determined using the results from two different methods or from two independent measurements using a method. Finally, certified values of seven elements of arsenic, cadmium, chromium, copper, lead, nickel and zinc were determined. Mercury did not satisfied the criteria of homogeneity and the result would be provided for information only, together with iron and tungsten. It was also studied, the extractable fraction of elements by aqua regia according to the ISO 11466 protocol being frequently studied for the purpose of environmental monitoring. It was performed as a inter-laboratory study by 6 laboratories of a public institute and universities. Standard deviation among the laboratories was much bigger than the uncertainty of the certified value. The result of inter-laboratory study on the extractable fraction will be provided for information, only.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.3
• /
• pp.241-249
• /
• 2013

This study was aimed to provide the fundamental data about oxidized hair color products. For this reason, we collected 125 oxidized hair color products, which were distributed in domestic market from January to October, 2012, and measured the heavy metal concentrations of lead, arsenic, cadmium, chromium, manganese, nickel, copper in the samples. Results were compared by domestic, foreign, henna, type and color. The average metal concentrations were as follows; 0.211 ${\mu}g/g$ for lead, 0.008 ${\mu}g/g$ for cadmium, 0.051 ${\mu}g/g$ for arsenic, 0.954 ${\mu}g/g$ for chromium, 6.250 ${\mu}g/g$ for manganese, 0.591 ${\mu}g/g$ for nickel and 0.544 ${\mu}g/g$ for copper. In case of lead and arsenic, the concentrations were much less than the regulated amount (20 ${\mu}g/g$ and 10 ${\mu}g/g$, respectively) suggested by MFDS (Ministry of Food and Drug Safety). In henna (p < 0.05), the concentrations were significantly higher than those of other domestic and foreign oxidized hair color products as follows; 1.264 ${\mu}g/g$ for lead, 0.267 ${\mu}g/g$ for arsenic, 0.025 ${\mu}g/g$ for cadmium, 4.055 ${\mu}g/g$ for chromium, 72.044 ${\mu}g/g$ for manganese, 3.076 ${\mu}g/g$ for nickel and 4.640 ${\mu}g/g$ for copper. Statistically, it showed that the heavy metal concentrations were quite different for the different types of hair color products. The cream and liquid type products had the highest average concentration in chromium (0.708 ${\mu}g/g$, 0.478 ${\mu}g/g$, respectively). On the other hand, powder type products showed the highest concentration in manganese (60.041 ${\mu}g/g$). In addition, the concentrations of heavy metals and the color of products are not quite correlated. It was shown that average concentrations of lead and chromium were higher for yellow, chromium for red and pink, manganese for brown and black, and nickel for green.

• Economic and Environmental Geology
• /
• v.41 no.4
• /
• pp.405-425
• /
• 2008

In order to investigate the amounts of trace elements flowing into reservoir, and to elucidate the relationship between trace element mobility and fraction size, the stream water and sediment samples were collected from thirty-two sites of the 3rd or 4th order stream within watershed surrounding the Juam reservoir. Chemical analyses of trace elements (As, Cd, Cr, Cu, Ni, Pb and Zn) for all samples were completed, and additionally cationi and anion for stream water samples. Considering the distribution of rocks and contamination sources in watershed, the eight stream sediments were selected from typical sites representing study areas, and we determined the concentrations of trace elements according to size fractions ($2\;mm{\sim}200\;{\mu}m$, $200{\sim}100\;{\mu}m$, $100{\sim}50\;{\mu}m$, $50{\sim}20\;{\mu}m$ and < $20\;{\mu}m$). The correlation relationships between concentrations and size fractions of stream sediments were important to identify the hydro-geochemical behavior of trace elements that flow into Juam reservoir. Stream waters showed four water types (Ca-Mg-$HCO_3$, Ca-Na-$HCO_3$-Cl, Ca-Na-$HCO_3-SO_4$, Ca-Na-$HCO_3$) depending on pollution sources such as coal mine, metal mine, farm-land and dwellings. Concentrations of trace elements increased clearly with the decrease in size fractions of stream sediments. Concentrations of Cu, Pb and Zn increased dramatically in silt size (< $20\;{\mu}m$) fraction, while As had high concentrations in sand size ($2\;mm{\sim}100\;{\mu}m$) fraction in downstream sediments of metal mines. These indicate that Cu, Zn, and Pb moved into Juam reservoir easily in the adsorbed form on silt size grain in sediments, and As was transported as As-bearing mineral facies, resulting in its less chance to reach into Juam reservoir.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.310-315
• /
• 2011

BACKGROUND: Heavy-metal pollution represents an important environmental problem due to the toxic effects of metals, and their accumulation throughout the food chain leads to serious ecological and health problems. METHODS AND RESULTS: Optimum conditions in continuous-flow stirred tank reactor (CSTR) and packedbed column contactor (PBCC) using brown seaweed biosorbent were investigated. Under optimum conditions from both lab-scale biosorbent systems, removal efficiency of copper (Cu) in a large-scale PBCC system was investigated. Removal capacity of Cu using brown seaweed biosorbent in a lab-scale CSTR system was higher than that in a lab-scale PBCC system. On the other hand, over 48 L/day of flow rate in Cu solution, removal efficiency of Cu in a lab-scale PBCC system was higher than that in a lab-scale CSTR system. Optimum flow rate of Cu was 24 L/day, optimum Cu solution concentration was 100 mg/L. Removal capacity of Cu at different stages was higher in the order of double column biosorption system > single column biosorption system. Under different heavy metals, removal capacities of heavy metal were higher in the order of Pb > Cr > Ni > Mn ${\geq}$ Cu ${\geq}$ Cd ${\fallingdotseq}$ Zn ${\geq}$ Co. Removal capacity of Cu was 138 L in a large-scale PBCC system. Removal capacity of Cu a large-scale PBCC system was similar with in a lab-scale PBCC system. CONCLUSION(s): Therefore, PBCC system using brown seaweed biosorbent was suitable for treating heavy metal wastewater.

• Economic and Environmental Geology
• /
• v.22 no.1
• /
• pp.35-63
• /
• 1989

Geochemical characteristics of the Guryongsan (Ogcheon) uraniferous black slate show that this is an analogue to the conventional Chattanooga and Alum shales in occurrences. Whereas, its highest enrichment ratio in metals including uranium, among others, is explained by the cyclic sedimentation of the black muds and quartz-rich silts, and the uniform depositional condition with some what higher pH condition compared to the conditions of the known occurrences. The cyclic sedimentation, caused by the periodic open and close of the silled basin, has brought about the flush-out) of the uranium depleted water and the recharge with the new metal-rich sea water, which consequently contributed to the high concentration of metals in mud. The metal-rich marine black muds, which mostly occur in the early to middle Palaeozoic times, is attributed by the geologic conditions which related to the atmospheric oxygen contents, and these are scarcely met in the late Precambrian and/or with the onset of Palaeozoic era in the geologic evolution of the earth.