• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.88-93
• /
• 2003

무전해 Ni-P와 Sn의 반응 및 Ni-P의 결정화에 대한 P 함량의 영향을 세 가지 다른 조성의 Ni-P (P 4.6, 9, 13 $wt.\%$)를 이용하여 연구하였다. $300^{\circ}C$까지 열처리한 모든 시편에서 $Ni_3Sn_4$ intermetallic compound (IMC)가 생성되었고 이들 시편을 $450^{\circ}C$까지 열처리한 경우 Sn 두께가 $0.5{\mu}m$로 작을 때 $Ni_3Sn_4$가 모두 $Ni_3Sn_2$로 변화하였다. nanocrystal인 Ni-4.6P는 Ni (111) texture를 유지하며 결정화되었고 Sn과의 반응시 형성되는 $Ni_3Sn_4$ IMC 또한 비정질인 Ni-9P, Ni-13P 경우보다 강한 (111) texture를 가짐이 확인되었다. Ni-P 막의 P 함량이 작은 경우 $Ni_3Sn_4$ IMC는 두껍고 조밀하게 형성되는 반면 P-rich layer 두께는 작아졌다.

• Journal of the Korean Ceramic Society
• /
• v.37 no.5
• /
• pp.491-496
• /
• 2000

Single phae Pb(Mg1/3Nb2/3)O3-based solid solutions, the Mg2+ of which are replaced by 20mol% of Ni2+, Zn2+, Cd2+, and the Pb2+ of which are replaced by 0∼20 mol% of La3+, were synthesized and their ordering structures of B-site cations were investigated by XRD and TEM. The B'-site cations (Mg2+, Ni2+, Zn2+, Cd2+) are disordered while these B'-site cations and the B"-site cations (Nb5+) are nonstoichiometrically 1:1 ordered within the ordered nano-domains dispersed in the Nb5+-rich disordered matrix. The charge imbalance between the B'-rich ordered nano-domains and the B"-rich disordered matrix are compensated by the doping of electron donor such as La3+, which enhances the degree of nonstoichiometric 1:1 ordering. For a given La3+ content, the degree of nonstoichiometric 1:1 ordering increases as the average ionic size difference between the B'-and B"-site cations increases, Ni2+

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.109-113
• /
• 2015

초임계 이산화탄소 발전 시스템 구축을 위해서는 고온, 고압의 열악한 환경에 노출되는 터빈, 열 교환기, 압축기와 같은 핵심 부품들의 내식성 평가는 반드시 수행되어야 한다. 이를 위해 후보소재 3종 Ferritic-Martensitic Steel (T92), Austenitic Steel (SS316L), Ni-based Alloy (IN738LC)를 선정하여 고온의 유사 초임계 $CO_2$ 발전 환경에서의 내식성 평가를 진행하였다. $600^{\circ}C$, $700^{\circ}C$의 2개의 온도 구간에서 $CO_2$ 분위기를 조성하여 800 시간 동안 노출시킨 뒤, Weight Change, Surface Morphology, Cross Section, Composition을 분석하였다. Cr-rich Protective Layer를 형성하는 Ni-based Alloy와 Fe/Cr-rich oxide를 형성하는 Austenitic Steel은 우수한 부식 저항성을 보인 반면에 Ferritic-Martensitic Steel은 높은 Weight Change와 Fe-rich Non-Protective Oxide가 관찰되어 상대적으로 낮은 부식 저항성을 보였다.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.2
• /
• pp.129-138
• /
• 1994

The purpose of this study is to clarify the influence of the reaction temperature and $AlCl_3$ content on the aluminide coating formation on Ni-based superalloy IN713C in CVD process and to compare its throwing power with that of Pack Cementation process. Aluminide coating was formed by CVD in hot-wall stainless tube reactor from an $AlCl_3-H_2$ mixture in the temperature range $850{\sim}1050^{\circ}C$. At reaction temperature $850^{\circ}C$, the coating thickness and the content of aluminium at the surface were increased as $AlCl_3$ heating temperature was raised. At reaction temperature $1050^{\circ}C$, they were not influenced by the variation of $AlCl_3$ heating temperature. When $AlCl_3$ heating temperature was fixed $125^{\circ}C$, the phases of the coatings were varied from $Ni_2Al_3$ to Al-rich NiAl and to Ni-rich NiAl with the reaction temperature. Therefore, in this study the reaction temperature has been found to be a major factor in determining the phase formed in CVD process. The throwing power of CVD was superior to that of Pack Cementation.

• Journal of the Korean Vacuum Society
• /
• v.14 no.3
• /
• pp.147-152
• /
• 2005

The structural evolution of $Ni(400\;\AA)/Au(400\;\AA)$ films on p-type GaN during thermal oxidation in ai. was investigated by in situ x-ray scattering experiments. These results indicate that Ni layer and Au layer intermix during thermal oxidation. Au-rich solid solutions containing the different amount of Ni atoms are formed during oxidation. The Ni atoms in Au-rich solid solution out-diffuse as the oxidation proceeds resulting in the formation of NiO(111) phase. Despite of the complete oxidation at $650^{\circ}C$, the position of bulk Au(111) diffraction profile indicates that small amount of Wi atoms are still incorporated in the Au phase.

• Journal of Industrial Technology
• /
• v.42 no.1
• /
• pp.1-5
• /
• 2022

Although the mileage of electric vehicles can be increased based on the excellent energy density of the LiNi_0.9Co_0.05Mn_0.05O₂, it is known that the reason for limiting its use is the low lifespan and poor surface stability due to the structural deformation of the LiNi_0.9Co_0.05Mn_0.05O₂. To improve the structural stability of LiNi_0.9Co_0.05Mn_0.05O₂, electrochemical performance is improved by La coating on the surface. La-modified LiNi_0.9Co_0.05Mn_0.05O₂ shows an initial capacity of 210.6 mAh/g, a capacity retention rate of 89.9 % after 50 cycles, and a retention rate of 52.5% at 6.0 C. These are superior performances than the pristine sample, because the structural stability of the LiNi_0.9Co_0.05Mn_0.05O₂ cathode is improved by the La coating.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.37-45
• /
• 2004

Electroless Ni(P) has been widely used for under bump metallization (UBM) of flip chip and surface finish layer in microelectronic packaging because of its excellent solderability, corrosion resistance, uniformity, selective deposition without photo-lithography, and also good diffusion barrier. However, the brittle fracture at solder joints and the spatting of intermetallic compound (IMC) associated with electroless Ni(P) are critical issues for its successful applications. In the present study, the mechanism of IMC spatting and microstructure change of the Ni(P) film were investigated with varying P content in the Ni(P) film (4.6,9, and $13 wt.\%$P). A reaction between Sn penetrated through the channels among $Ni_3Sn_4$ IMCs and the P-rich layer ($Ni_3P$) of the Ni(P) film formed a $Ni_3SnP$ layer. Thickening of the $Ni_3SnP$ layer led to $Ni_3Sn_4$ spatting. After $Ni_3Sn_4$ spatting, the Ni(P) film directly contacted the molten solder and the $Ni_3P$ phase further transformed into a $Ni_2P$ phase. During the crystallization process, some cracks formed in the Ni(P) film to release tensile stress accumulated from volume shrinkage of the film.

• Journal of the Korean Ceramic Society
• /
• v.35 no.7
• /
• pp.749-756
• /
• 1998

TiC-Ni and TiC-Ni-Mo cermet powders were produced by Self-propagating High temperature Synthesis (SHS) process. The cooling rate of synthesized powders were controlled by using the V-shaped copper jig and the carbide size decreased with increasing the cooling rate I. e decreasing the width of copper jig Round shape carbide particles were produced after SHS reaction in TiC-Ni as well as TiC-Ni-Mo powders. Local segregation of Mo rich phases was observed in SHS powder of TiC-Ni-Mo and the uneven dis-triobution of Mo promoted the faster growth rate of carbide particles during sintering compared to the same composition specimen with commercial TiC powder. Howogeneous microstructure of TiC-Ni-Mo cermet was obtained when the elemental Mo powder was mixed with the SHS powder of TiC-Ni.

• Korean Journal of Materials Research
• /
• v.14 no.4
• /
• pp.281-286
• /
• 2004

The oxide scales formed on Ni-18W(at.%) coating that was electrodeposited on steel were investigated using XRD, SEM and TEM. The oxide scales consisted mainly of an outer NiO layer, and an inner thick ($NiWO_4$+NiO) mixed layer. The unoxidized coating below the oxide scale was rich in Ni and depleted in W, owing to the consumption of Wand the resultant Ni enrichment. The oxidation resistance of Ni-18W coating was poorer than that of the TiN coating, due to the formation of nonprotective NiWO$_4$. During oxidation, Ni and the substrate element of Fe diffused outward, while oxygen inward, according to the concentration gradients.

• Journal of Magnetics
• /
• v.6 no.3
• /
• pp.94-100
• /
• 2001

Fe-Co-Ni particles with an average size of 45 and 135 nm are characterized in terms of magnetic phase transformation and magnetic properties at room temperature. BCC structure of Fe-Co-Ni spherical particles can be synthesized from Fe-Co-Ni-Al-Cu precursor films by heating at 600-80$0^{\circ}C$ for the phase separation of Fe-Co rich Fe-Co-Ni particles, followed by a post heating at $600^{\circ}C$ for 5 hours. The average size of nanoparticles was directly determined by the thickness of precursor films. Exchange interactive hysteresis was observed for the nano-composite (Fe-Co-Ni)+(Fe-Ni-Al) films resulting from the short exchange interface between ferromagnetic Fe-Co-Ni particles surrounded by almost papramagnetic Ni-Al-Fe matrix. Arraying the isolated Fe-Co-Ni nano-particles in a random arrangement on $Al_2O_3$substrate the particle assembly showed a behavior of dipole interactive ferromagnetic clusters depending on their volume and inter-particle distance.