• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1789-1791
• /
• 1999

In consideration of piezoelectric characteristic and Temperature stability, 3-element system dopped with NiO, $Cr_2O_3$ well-known as Hardner and Stabilizer whose primary element is PZT was eximanated its structure, piezoelectric characteristics, dopping with Nio, $Cr_2O_3$. We think that piezoelectric Characteristic is developed, remenent polarization and $E_c$ can developed in specimens by dopping with NiO, $Cr_2O_3$ additive. also, electromechanical quality factor largely showed tendency of decrement. According to dopping NiO, $Cr_2O_3$ more.

• 대한치과기공학회지
• /
• 제10권1호
• /
• pp.47-54
• /
• 1988

The purpose of this study is to evaluate the castability of Ni-Cr alloys for crown and bridge. New young, Hi-Crown and CB-80 which are widely used in dental laboratory were chosen, casting and increased the temperature of furnace 100$^{\circ}C$ of each 7 grades from 600$^{\circ}C$ to 1200$^{\circ}C$. The results are as follows : 1. CB-80 is the most prominent castability among the three Ni-Cr alloys which are Hi-Crown, New-young and Hi-Cr. 2. The good burning temperatures of casting for CB-8p are 900$^{\circ}C$, 100$^{\circ}C$ and 1100$^{\circ}C$ which are obtained four complate casting body of five former patterns. 3. The most proper burning temperature for three Ni-Cr alloys is 900$^{\circ}C$.

• 열처리공학회지
• /
• 제9권2호
• /
• pp.91-102
• /
• 1996

Microstructural control to produce multiphase structure has received much attention to improve the high temperature strength as well as low temperature ductility of intermetallics. Transmission electron microscopic investigation has been carried out concerning the effect of Cr-precipitation on the mechanical properties of B2-ordered NiAl containing 4 to 8 mol% of Cr. By aging at temperatures around 973 K after solution annealing, fine spherical precipitates took place homogeneously in the NiAl matrix and the alloys hardened appreciably. Selected area electron diffraction (SAED) patterns have not revealed any additional extra-spots during aging, because the Cr-particles show cube-cube orientation relationship and keep a perfect coherency with the ordered matrix lattice. Dislocations were confirmed to bypass the particles during deformation. Although the dispersion of Cr-particles increased the yield strength of NiAl at intermediate temperature, the strength decreased appreciably at higher temperatures.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1887-1892
• /
• 2021

The effect of gadolinium and boron on the texture development and magnetic properties of the texture controlled 23Cr-10NiCu duplex stainless steels were studied to develop a high performance neutron and electromagnetic shielding material. The 23Cr-10NiCu base alloy is composed of 60% of austenite and 40% of ferrite, whereas, the 23Cr-10NiCu-0.5Gd-0.8B modified alloy is composed of 66% of austenite, 27% of ferrite and 7% of CrFeB intermetallic compounds. The gadolinium and boron addition to the 23Cr-10NiCu base alloy increased mechanical properties. Microstructure observation showed that the small addition of 0.5 wt% gadolinium and 0.8 wt% boron to the alloy retarded to form texture at the same hot rolling conditions, and improved the maximum magnetism, residual magnetism and coercive force about 3%, 122% and 120%, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.275-278
• /
• 2000

We were fabricated of NiCr thin film resistors(TFR) on A1$_2$O$_3$(99.5%) substrates by dc magnetic sputtering system. The characteristics of electrical resistance (Sheet resistance & Temperature-Coefficient of the resistance-value:TCR) by annealing condition and reactive gas on the resistors were studied.

• 한국환경보건학회지
• /
• 제25권3호
• /
• pp.51-57
• /
• 1999

This study was carried out to investigate the concentrations of Ni, Cr and Cu, to analyze the correlations among those, and between concentrations and traffic volumes by type of car in roadside ambient air at Chongro-, Chungkechon- and Kangnam terminal- area in Seoul from October 1st to October 31st in 1997. The results were as follows ; 1. The means of concentrations of Ni in roadside ambient air were 34.1, 25.1 and 23.6 ng/m$^3$ at Chungkechon, Kangnam terminal and Chongro area, respectively. The highest concentrations of Ni by time were 26.8 in the evening, 45.5 in the evening and 49.4 ng/m$^3$ in the forenoon at Chongro, Chungkechon and Kangnam terminal area, respectively. 2. The means of concentrations of Cr in road side ambient air were 97.7, 80.1 and 70.9 ng/m$^3$ at Chong, Chungkechon and Kangnam terminal area, respectively. The highest concentrations of Cu by time were 205.3 in the evening, 114.4 in the evening and 92.3 ng/m$^3$ in the forenoon at Chongro, Chungkechon and Kangnam terminal area, respectively. 4. The tendencies of concentrations of Ni and Cr by time were similar to each other. Especially, at Kangnam terminal area, correlation coefficients between concentrations of Ni and Cr and the traffic volume of bus were high(r=0.997,0.975). 5. The tendency of concentration of Cu and the traffic volume of passenger car at each area were high(r=0.832, 0.968) 6. Correlation coefficients between Cu and Zn, and between Ni and Cr were 0.762 and 0.842, respectively. This means that the possibility of co-existence of Cu-Zn or Ni-Cr is very high.

• 한국세라믹학회지
• /
• 제34권1호
• /
• pp.88-94
• /
• 1997

플라즈마 용사법(plasma spray method)으로 제작된 상용 가스 터빈 연소기의 finned segment의 열차폐용 코팅계, ZrO2-8wt%Y2O3 top coat/Ni-26Cr-5Al-0.5Y bond coat/Hastelloy X superalloy 기판에서 NiCrAlY bond coat의 산화 거동과 열피로 파괴에 대하여 조사하였다. 생성된 bond coat의 주산화물은 NiO, CrO2, Al2O3였다. ZrO2/bond coat계면에서 생성된 산화물의 분포는 고온에서의 사용 전에 이 계면 아래에 얇은 층의 Al2O3가없는 곳에서는 NiO 산화층 및에 Cr2O3와 Al2O3가 혼합된 형태를 나타내었다. 열피로에 의해 박리된 시편의 파면을 관찰한 결과, 파괴는 주로 ZrO2/산화층 계면보다 세라믹층내로 약간 치우쳐서 일어나지만, 산화층 내에서도 약간 일어남을 알 수 있었다.

• 한국분말재료학회지
• /
• 제25권5호
• /
• pp.408-414
• /
• 2018

This study investigates the microstructure and wear properties of cermet (ceramic + metal) coating materials manufactured using high velocity oxygen fuel (HVOF) process. Three types of HVOF coating layers are formed by depositing WC-12Co, WC-20Cr-7Ni, and Cr3C2-20NiCr (wt.%) powders on S45C steel substrate. The porosities of the coating layers are $1{\pm}0.5%$ for all three specimens. Microstructural analysis confirms the formation of second carbide phases of $W_2C$, $Co_6W_6C$, and $Cr_7C_3$ owing to decarburizing of WC phases on WC-based coating layers. In the case of WC-12Co coating, which has a high ratio of $W_2C$ phase with high brittleness, the interface property between the carbide and the metal binder slightly decreases. In the $Cr_3C_2-20CrNi$ coating layer, decarburizing almost does not occur, but fine cavities exist between the splats. The wear loss occurs in the descending order of $Cr_3C_2-20NiCr$, WC-12Co, and WC-20Cr-7Ni, where WC-20Cr-7Ni achieves the highest wear resistance property. It can be inferred that the ratio of the carbide and the binding properties between carbide-binder and binder-binder in a cermet coating material manufactured with HVOF as the primary factors determine the wear properties of the cermet coating material.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1999년도 춘계연구발표회 논문개요집
• /
• pp.126-127
• /
• 1999

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1996년도 추계연구발표회 논문개요집
• /
• pp.32-33
• /
• 1996