• Journal of Hydrogen and New Energy
• /
• v.13 no.4
• /
• pp.270-278
• /
• 2002

Mg and Mg alloys are attractive hydrogen storage materials because of their lightweight and high absorption capacity. Their range of applications could be further extended if their hydrogenation properties and degradation behavior could be improved, The main emphasis of this study was to find an economic manufacturing method for Mg-Ti-Ni-H systems, and to investigate their hydrogenation properties, In order to examine hydrogenation behavior, a Sieverts type automatic pressure-composition-isotherm(PCI) apparatus was used and the experiments were performed at 423, 473, 523, 573, 623 and 673K. The results of thermogravimetric analysis(TGA) reveal that the absorbed hydrogen contents are around 2.5 wt% for ($Mg_9Ti_1$)-10 wt% Ni. With increased Ni content, the absorbed hydrogen content decreases to 1.7 wt%, whereas the dehydriding starting temperatures are lowered by some 70-100K. The results of PCI on ($Mg_9Ti_1$)-20 wt% Ni show that its hydrogen capacity is around 5.3 wt% and its reversible capacity and plateau pressure are also excellent at 523K and 573K. In addition, the reaction enthalpy, $\Delta$HD.plateau, is $30.6{\pm}5.7kJ/molH_2$.

• Korean Journal of Environmental Biology
• /
• v.24 no.4
• /
• pp.408-415
• /
• 2006

Serpentines soil have high values of magnesium and low values of calcium, and are usually deficient in N and P, but rich in iron, Ni, silicates. We investigated serpentine soil properties and measured the content of nutrient elements and heavy metals in shoots and root of plant species which were in common at serpentine and non-serpentine areas in Andong, Korea. The soils showed higher pH value above 6.9. The contents of Ni, Cr, Fe and Mg of serpentine soils exhibited 77, 27, 5.5 and 12.5 times more than in non-serpentine soils, respectively. The content of Na was almost same but K was two times higher in non-serpentine soil, compared with serpentine soil. The contents of nutrient element such as K, Ca, Na and P in serpentine plants did not show conspicuous differences with non-serpentine plants. On the other hand, the concentrations of Ni, Cr, Fe, Mg and Mg/Ca were very high in plant on serpentine area. The all plant species collected at the serpentine site were bodenvag plants, which are not restricted to a specific type of substrate. By the plant species and parts of plant tissues, the absorption levels and patterns showed high variation and were species-specific. Carex lanceolata, Lysimachia clethroides and Cynanchum paniculatum contained much chromium and Eupatorium chinense and C. paniculatum exhibited high contents of Ni. In leaf tissue, C. lanceolata, Rubus parvifolius, Festuca ovina, Quercus serrata, and L. clethroides took comparatively large amount of Cr in serpentine area. E. chinense contained large amount of Ni, Cr and Fe in a leaf tissue. The stem of Galium verum, Juniperus rigida included high amount of Cr, Ni and Fe. And C. paniculatum absorbed large amount of Ni and Cr in the stem.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.59-59
• /
• 2009

The influences of B and Si in the filler metals on microstructure and isothermal solidification during transient liquid-phase (TLP) bonding of a nitrogen-containing duplex stainless steel with MBF-30 (Ni-4.5wt.%Si-3.2wt.%B) and MBF-35 (Ni-7.3wt.%Si-2.2wt.%B), were studied at the temperature range of $1030-1090^{\circ}C$ with various times from 60 s to 3600 s under a vacuum of approximately $10^{-5}$ Torr. In case of the former, BN, $Ni_3B$ and $Ni_3Si$ precipitates were formed in the bonding region. BN and $Ni_3Si$ secondary phases were present in the joint for the latter case. The formation of $Ni_3B$ within the joint centerline is dependent on B content. The morphology of $Ni_3Si$ is dominated by Si concentration. A difference between the times for complete isothermal solidification obtained by the experiments and the conventional TLP bonding diffusion model was observed when using MBF-35. According to the simulated results, the isothermal solidification completion time for MBF-35 case was smaller than that in MBF-30. However, this experimental value obtained using MBF-35 was notably larger than that obtained using MBF-30. Isothermal solidification of liquid MBF-30 is controlled by the first isothermal solidification regime dependent on B diffusion model, whereas that of liquid MBF-35 experiences two isothermal solidification regimes and is mainly controlled by the second isothermal solidification dependent on Si diffusion model. In addition, only if Si content exceeds a critical value, the slower 2nd solidification regime will commence.

• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.203-211
• /
• 1992

Fracture behavior and martensite substructure of Ni-36.5at.%Al alloy were investigated with the addition of vanadium which is known as scavenging element of grain boundary. The fracture surfaces were examined by scanning electron microscopy and the EDX spectrometer was applied for composition analysis of fracture surfaces. The substructure of martensite was studied by transmission electron microscopy. By addition of vanadium, fracture surfaces show mixed modes of intergranular and transgranular fracture and more Al content is found on the grain boundaries. For Ni-36.5at.%Al alloy, the planar faults observed in the martensite plates are the internal twins. By increasing the vanadium content, the modulated structure with stacking faults and dislocations dominates while the twinned martensite disappears. The stacking fault is determined to be extrinsic due to the substitution of V for Al. It is concluded that the segregation of sulfur on the high-energy state stacking fault area suppresses the intergranular fracture.

• Korean Journal of Materials Research
• /
• v.20 no.10
• /
• pp.543-549
• /
• 2010

The hydrogen energy had recognized clean and high efficiency energy source. The research field of hydrogen energy was production, storage, application and transport. The commercial storage method was using high pressure tanks but it was not safety. However metal hydride was very safety due to high chemical stability. Mg and Mg alloys are attractive as hydrogen storage materials because of their lightweight and high absorption capacity (about 7.6 wt%). Their range of applications could be further extended if their hydrogenation properties and degradation behavior could be improved. The main emphasis of this study was to find an economical manufacturing method for Mg-Ti-Ni-H systems, and to investigate their hydrogenation properties. In order to examine their hydrogenation behavior, a Sievert's type automatic pressure-compositionisotherm (PCI) apparatus was used and experiments were performed at 423, 473, 523, 573, 623 and 673 K. The results of the thermogravimetric analysis (TGA) revealed that the absorbed hydrogen contents were around 2.5wt.% for (Mg8Ti2)-10 wt.%Ni. With an increasing Ni content, the absorbed hydrogen content decreased to 1.7 wt%, whereas the dehydriding starting temperatures were lowered by some 70-100 K. The results of PCI on (Mg8Ti2)-20 wt.%Ni showed that its hydrogen capacity was around 5.5 wt% and its reversible capacity and plateau pressure were also excellent at 623 K and 673 K.

• Korean Journal of Environment and Ecology
• /
• v.12 no.1
• /
• pp.22-29
• /
• 1998

This study is investigated for the trace element concentration in the soils derived from different parent rocks, which are serpentinites, metamorphic rocks and black shales, and the absorption of the trace element by Pinus rigida in Hongseong and Keumsan, Chungnam, respectively. The concentrations of nickel, chrominium and cobalt are high in the serpentinites, whereas the concentrations of zinc, molybdenium and iron are high in the metamorphic rocks. These elements in black shale are lower than those in serpentinites and metamorphic rocks. The serpentine soils show high nickel, chrominium and cobalt content, while zinc and iron content are high in the mixed soils(serpentinites + metamorphic rocks) and black shales. Comparing with parent rocks, all of trace elements in their weathered soils are low. The pH of serpentine soil is high, 7.73~9.55 and that of black shale soil in 5.61. In serpentine area, the absorptions of chrominium by P. rigida is lower than its in the soils. The absorption of zinc by P. rigida is high relative to zinc concentration in soils. The Co/Ni and Fe/Ni quotient in P. rigida over serpentine soils are considerably lower than those growing over other soils tpes.

• Journal of the Korean Magnetics Society
• /
• v.8 no.4
• /
• pp.192-197
• /
• 1998

The Mossbauer spectra of the $Ni_{1-x}Cd_xFeAlO_4$ system were investigated with the Cd content x at room temperature. The spectra of the samples exhibit various patterns as follows 1) superparmagnetic relaxation for 0$\leq$x$\leq$0.2, 2) ferrimagnetic sextet for 0.3$\leq$x$\leq$0.5, 3) ferromagnetic relaxation for x=0.6, 0.7, 4) paramagnetic doublet for 0.8$\leq$x$\leq$1, with the Cd content x. In the samples with x values from 0 to 0.2, the substituted $Cd^{2+}$ ions transfer the $Al^{3+}$ ions from A-site to B-site mainly. The superparamagnetic relaxation effect and the ferromagnetic relaxation effect are derived from the $Al^{3+}$, $Cd^{2+}$ respectively. The magnetic structure of the $Ni_{1-x}Cd_xFeAlO_4$ system was explained by the Yafet-Kittel model.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1995.04a
• /
• pp.36-36
• /
• 1995

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.199-200
• /
• 2003

• Journal of Surface Science and Engineering
• /
• v.15 no.2
• /
• pp.57-67
• /
• 1982

Electroless Ni-plating is often utilized in industries due to its physical and mechanical characteristics in contrast to conventional electroplatings. Thus, electroless Ni-plating will be broadly applicated in many fields. However, The physial and mechanical properties of this depositss depend largely on the structure and P content of film and heat treatment. And here discused about the important results of those past research.