• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.5
• /
• pp.1-11
• /
• 2008

This study was carried out to provide primary data set for cleaning of contamination site. By having hydroponic culture on Salix alba and S. caprea seedling treated with Ni solution, the result of Ni accumulation came out as followings : In a treatment of Ni to the Salix alba and S. caprea, Ni accumulation increased in its root, leaves, and stem, as Ni concentration became higher until $10.0{\mu}mol$. But in a $100.0{\mu}mol$ treatment, the seedlings died after 4 weeks. Ni accumulation in the Salix alba and S. caprea was the highest in its roots, second-highest in leaves, and the lowest in stems. In the case of $10.0{\mu}mol$ treatment of Ni solution, Ni accumulation in roots were above 500.0mg/L, and leaves were above 20.0mg/L. But it was lower than 13.0mg/L in stems. Ni accumulation in the plant increased more when nutrient solution containing Ni was weekly changed than just refilling the same amount of nutrient solution that evaporated Ni accumulation in Salix alba was higher than S. caprea when the nutrient solution had been refilled only.

• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.292-297
• /
• 2010

This study was carried out to provide preliminary data to purify contaminated sites by nickel (Ni). After rooted cuttings of Salix reichardtii had been grown in Ni solution (hydroponic culture), pH changes in the solution and the accumulated Ni amount in plant parts were measured and analyzed. When the Ni concentration was low enough for S. reichardtii cuttings to grow well, the pH value of the solution decreased considerably. As the Ni concentration got higher, the plant growth got poorer and the pH value decreased slowly. Roots accumulated the highest Ni amount. Leaves and stems followed after. When stems were older, the accumulated Ni amount was lower. more Ni was accumulated in the plant parts which had more flexible tissue and live cells. As the Ni concentration in solution got higher up to 50.0 ${\mu}mol$/L, so did the Ni accumulation in the plant parts. However, the plant individuals nearly died and the Ni accumulation tended to drop when the Ni concentration in solution was 100.0 ${\mu}mol$/L. The rooted cuttings of S. reichardtii grew poorer as the Ni concentration in solution got higher. The plants in solution with 100.0 ${\mu}mol$/L of Ni were practically dead in four weeks.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.5
• /
• pp.39-46
• /
• 2005

This study was conducted to investigate the heavy metal accumulation in wild plants. The samples from 5 plant species on 14 sites were taken on the roadside where urban and industrial regions in northern Gyeonggi do. Artemisia princeps var. orientalis, Chenopodium album L. var. centrobrum, Erigeron canadensis L., Rumex crispus L. and Taraxacum platycapum H. Dahlst were taken from different parts of the plants gathered in surveyed sites for analysing. This study classified which species were suitable to accumulators, excluders, or indicators which were provided as Phytoremediation for heavy metals(Cd, Cr, Ni, Pb and Zn) and considered the applicability of that work. 1. The mean accumulation of 6 heavy metals in plants was as follows; Zn> Cu> Cr> Pb> Ni> Cd in rows except for Ni and Pb in Erigeron. 2. The highest heavy metal accumulators were Taraxacum and Artemisia. 3. The comparison of heavy metal accumulations between the tops and roots in the plants was as follows; Zn> Cd> Pb> Ni> Cu> Cr. 4. Comparison of heavy metal accumulations between tops and roots, root parts were higher than the top parts in most of the plants. Especially, in Taraxacum, a ratio was over 1.0 in Cr, Ni, and Zn. Therefore, Taraxacum was an accumulator for 3 heavy metals. And Erigeron, Chenopodium, Rumex, Artemisia were good for excluders which had lower than 1.0.

• Korean Journal of Materials Research
• /
• v.31 no.7
• /
• pp.409-419
• /
• 2021

The effect of solidification rate on micro-segregation in investment casting of IN738LC superalloy was studied. In Ni-based superalloys, the micro-segregation of solute atoms is formed due to limited diffusion during cast and solidification. The microstructure of cast Ni-based superalloys is largely divided into dendrite core of initial solidification and interdendrite of final solidification. In particular, mosaic shaped eutectic γ/γ' and carbides are formed in the interdendrite of the final solidification region in some cases. The micro-segregation phenomena formed in regions of dendrite core and interdendrite including eutectic γ/γ' and carbides were analyzed using OM, SEM/EDS and micro Vickers hardness. As a result of analysis, the lack of (Cr, W) and the accumulation of Ti were measured in the eutectic γ/γ', and the accumulation of (Cr, Mo) and the lack of Ti were measured in the interdendrite between dendrite and eutectic. Carbides formed in interdendritic region were composed of (Ti, W, Mo, C). The segregation applied to each microstructure is mainly due to the formation of γ' with Ni₃(Al,Ti) composition. The Ni accumulation accompanied by Cr depletion, and the Ti accumulated in the eutectic region as a γ' forming elements. The Mo tends to diffuse out from the dendrite core to the interdendrite, and the W diffuse out from the interdendrite to the dendrite core. Therefore, the accumulation of Mo in the interdendrite and the deficiency of W occur in the eutectic region located in the interdendrite. Heat treatment makes the degree of the micro-segregation decrease due to the diffusion during solid solution. This study could be applied to the heat treatment technology for the micro-segregation control in cast Ni-based superalloys.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.205.1-205.1
• /
• 2007

• Journal of Hydrogen and New Energy
• /
• v.8 no.2
• /
• pp.79-90
• /
• 1997

Extensive work has been done on investigating the inner cell pressure characteristics of sealed type Ni-MH battery in which Zr-Ti-Mn-V-Ni alloy is used as anode. The inner cell pressure of this type Ni-MH battery much more increases with the charge/discharge cycling than that of the other type Ni-MH battery where commercialized $AB_5$ type alloy is used as anode. The increase of inner cell pressure in the sealed type Ni/MH battery using Zr-Ti-Mn-V-Ni alloy system is mainly due to the accumulation of oxygen gas during charge/discharge cycling. The accumulation of oxygen gas arises mainly due to the low rate of oxygen recombination on the MH electrode surface during charge/discharge cycling. The difference of oxygen recombination rate between $AB_5$ type electrode and Zr-Ti-Mn-V-Ni electrode is caused by the difference of electrode reaction surface area resulting from different particle size after their activation and the difference of surface catalytic activity for oxygen recombination reaction, respectively. After EIS analysis, it is identified that the surface catalytic activity affects much more dominantly on the oxygen recombination reaction than the reaction surface area does. In order to suppress the inner cell pressure of Ni-MH battery where Zr-Ti-Mn-V-Ni is used as anode, it is suggested that the surface catalytic activity for oxygen recombination should be improved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.349-349
• /
• 2010

Great performance of many semiconductor devices requirs the use of low-resistance ohmic contact. Typically, transmission line method (TLM) patterns are used to measure the specific contact resistance between silicon and metal. In this works, we investigate contact resistance for metal dependent (Cr/Ag, Ni) using TLM pattern based on silicon-on-insulator (SOI) wafer. The electrode with Ni linearly increases contact resistance as the pattern distance increase from $15{\mu}m$ to $75{\mu}m$ in accumulation part, but non-linearly increase in inversion part. In additional, the electrode with Cr/Ag linearly increases contact resistance as the pattern distance increase from $15{\mu}m$ to $75{\mu}m$ in inversion part, but non-linearly increase in accumulation part.

• Advances in environmental research
• /
• v.3 no.4
• /
• pp.321-335
• /
• 2014

Eight trace metals, Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn, were measured in the urban soil of Guwahati City, Assam, India from 31 sites representing five different types of land use, residential, commercial, industrial, public utilities, and roadside. Cd and Co occurred in very low concentrations (Cd << Co) in all types of land use without any significant variation from one type of land use to another. Ni concentrations were more than those of Co, and the concentrations depended on land use pattern. Average Cr and Cu concentrations were ${\geq}100mg/kg$, but Cr had a significantly higher presence in industrial land use. Pb concentrations showed similar trends. The two metals, Mn and Zn, were present in much larger amounts compared to the others with values ${\geq}300mg/kg$. Industrial and roadside soil contained much more Mn while commercial soil was enriched with Zn. Toxicity Characteristic Leaching Procedure (TCLP) was used for elucidating the mobility characteristics of the eight heavy metals. Mn suffered the highest leaching from commercial land (9.9 mg/kg on average) and also from other types of land. Co, Cu and Pb showed higher leachability from commercial soils but the leached concentrations were less than those of Mn. The two metals, Zn and Ni, were leached from residential land in considerable amounts. The TCLP showed Mn to be the most leachable metal and Cr the least.

• Journal of Powder Materials
• /
• v.21 no.1
• /
• pp.34-38
• /
• 2014

Cu-Ni alloys with unidirectionally aligned pores were prepared by freeze-drying process of CuO-NiO/camphene slurry. Camphene slurries with dispersion stability by the addition of oligomeric polyester were frozen at $-25^{\circ}C$, and pores in the frozen specimens were generated by sublimation of the camphene during drying in air. The green bodies were hydrogen-reduced at $300^{\circ}C$ and sintered at $850^{\circ}C$ for 1 h. X-ray diffraction analysis revealed that CuO-NiO composite powders were completely converted to Cu-Ni alloy without any reaction phases by hydrogen reduction. The sintered samples showed large and aligned parallel pores to the camphene growth direction, and small pores in the internal wall of large pores. The pore size and porosity decreased with increase in CuO-NiO content from 5 to 10 vol%. The change of pore characteristics was explained by the degree of powder rearrangement in slurry and the accumulation behavior of powders in the interdendritic spaces of solidified camphene.

• Korean Journal of Environmental Biology
• /
• v.22 no.1
• /
• pp.120-126
• /
• 2004

Kenaf plants were hydroponically grown in reactor containing toxic metals as Cd, Cu, Cr, Ni and Zn to examine the ability to take up heavy metal. The plants were fertilized using a nutrient solution, which was appropriately adjusted to optimum pH, DO and conductivity. For n hydraulic retention time of 8 days, Cr, Cd, Cu, Ni and Zn were removed up to 90.5, 80.5, 66.1%, 71.1% and 79.4%, and reduced from 2.34 to 0.54 mg $L^{-1}$, 3.37 to 1.07 mg $L^{-1}$, 4.92 to 3.19 mg $L^{-1}$, 6.31 to 4.41 mg $L^{-1}$ and 6.27 to 2.09 mg $L^{-1}$. Especially, accumulation rate of Cr, Cd, Cu, Ni and Zn in the plant were measured up to 347.32, 275.39, 157.52, 50.48 and 211.01 mg DW kg $L^{-1}d^{-1}$, respectively. We considered that Kenaf plants removed Cr, Cd and Zn more effectively than other toxic metals applied.