• 한국환경복원기술학회지
• /
• 제11권5호
• /
• pp.1-11
• /
• 2008

This study was carried out to provide primary data set for cleaning of contamination site. By having hydroponic culture on Salix alba and S. caprea seedling treated with Ni solution, the result of Ni accumulation came out as followings : In a treatment of Ni to the Salix alba and S. caprea, Ni accumulation increased in its root, leaves, and stem, as Ni concentration became higher until $10.0{\mu}mol$. But in a $100.0{\mu}mol$ treatment, the seedlings died after 4 weeks. Ni accumulation in the Salix alba and S. caprea was the highest in its roots, second-highest in leaves, and the lowest in stems. In the case of $10.0{\mu}mol$ treatment of Ni solution, Ni accumulation in roots were above 500.0mg/L, and leaves were above 20.0mg/L. But it was lower than 13.0mg/L in stems. Ni accumulation in the plant increased more when nutrient solution containing Ni was weekly changed than just refilling the same amount of nutrient solution that evaporated Ni accumulation in Salix alba was higher than S. caprea when the nutrient solution had been refilled only.

• 한국산림과학회지
• /
• 제99권3호
• /
• pp.292-297
• /
• 2010

본 연구는 Ni 오염지를 정화하기 위한 기초자료를 제공하고자 Ni 수용액에서 Salix reichardtii를 수경재배 한 후 수용액의 pH 변화와 부위별 Ni 축적량을 분석하여 다음과 같은 결과를 얻었다. 영양액의 pH는 Ni의 처리농도가 낮아 S. reichardtii의 생장속도가 높을수록 많이 낮아졌고 Ni의 농도가 높아 생장속도가 저조할수록 적게 낮아졌다. 부위별 Ni의 축적량은 뿌리가 가장 높고 다음이 잎, 줄기의 순이었으며 오래된 줄기 내 축적량이 가장 낮았다. 즉, 식물체의 조직이 유연하고 생활세포가 많을수록 Ni축적량이 많은 것으로 나타났다. 또한 Ni의 처리 50 ${\mu}mol$/L까지 는 농도가 높아질수록 체내 축적량은 높아졌으나 100.0 ${\mu}mol$/L처리구에서는 식물체가 고사되어 체내 축적량이 오히려 감소되는 경향이었다. Ni가 농도별로 함유된 영양액에서 수경재배 한 결과 Ni를 고농도로 처리할수록 S. reichardtii의 생장은 저조하였으며, Ni 100.0 ${\mu}mol$/L처리구에서는 4주후 거의 고사수준이었다.

• 한국환경복원기술학회지
• /
• 제8권5호
• /
• pp.39-46
• /
• 2005

This study was conducted to investigate the heavy metal accumulation in wild plants. The samples from 5 plant species on 14 sites were taken on the roadside where urban and industrial regions in northern Gyeonggi do. Artemisia princeps var. orientalis, Chenopodium album L. var. centrobrum, Erigeron canadensis L., Rumex crispus L. and Taraxacum platycapum H. Dahlst were taken from different parts of the plants gathered in surveyed sites for analysing. This study classified which species were suitable to accumulators, excluders, or indicators which were provided as Phytoremediation for heavy metals(Cd, Cr, Ni, Pb and Zn) and considered the applicability of that work. 1. The mean accumulation of 6 heavy metals in plants was as follows; Zn> Cu> Cr> Pb> Ni> Cd in rows except for Ni and Pb in Erigeron. 2. The highest heavy metal accumulators were Taraxacum and Artemisia. 3. The comparison of heavy metal accumulations between the tops and roots in the plants was as follows; Zn> Cd> Pb> Ni> Cu> Cr. 4. Comparison of heavy metal accumulations between tops and roots, root parts were higher than the top parts in most of the plants. Especially, in Taraxacum, a ratio was over 1.0 in Cr, Ni, and Zn. Therefore, Taraxacum was an accumulator for 3 heavy metals. And Erigeron, Chenopodium, Rumex, Artemisia were good for excluders which had lower than 1.0.

• 한국재료학회지
• /
• 제31권7호
• /
• pp.409-419
• /
• 2021

The effect of solidification rate on micro-segregation in investment casting of IN738LC superalloy was studied. In Ni-based superalloys, the micro-segregation of solute atoms is formed due to limited diffusion during cast and solidification. The microstructure of cast Ni-based superalloys is largely divided into dendrite core of initial solidification and interdendrite of final solidification. In particular, mosaic shaped eutectic γ/γ' and carbides are formed in the interdendrite of the final solidification region in some cases. The micro-segregation phenomena formed in regions of dendrite core and interdendrite including eutectic γ/γ' and carbides were analyzed using OM, SEM/EDS and micro Vickers hardness. As a result of analysis, the lack of (Cr, W) and the accumulation of Ti were measured in the eutectic γ/γ', and the accumulation of (Cr, Mo) and the lack of Ti were measured in the interdendrite between dendrite and eutectic. Carbides formed in interdendritic region were composed of (Ti, W, Mo, C). The segregation applied to each microstructure is mainly due to the formation of γ' with Ni₃(Al,Ti) composition. The Ni accumulation accompanied by Cr depletion, and the Ti accumulated in the eutectic region as a γ' forming elements. The Mo tends to diffuse out from the dendrite core to the interdendrite, and the W diffuse out from the interdendrite to the dendrite core. Therefore, the accumulation of Mo in the interdendrite and the deficiency of W occur in the eutectic region located in the interdendrite. Heat treatment makes the degree of the micro-segregation decrease due to the diffusion during solid solution. This study could be applied to the heat treatment technology for the micro-segregation control in cast Ni-based superalloys.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.205.1-205.1
• /
• 2007

• 한국수소및신에너지학회논문집
• /
• 제8권2호
• /
• pp.79-90
• /
• 1997

Extensive work has been done on investigating the inner cell pressure characteristics of sealed type Ni-MH battery in which Zr-Ti-Mn-V-Ni alloy is used as anode. The inner cell pressure of this type Ni-MH battery much more increases with the charge/discharge cycling than that of the other type Ni-MH battery where commercialized $AB_5$ type alloy is used as anode. The increase of inner cell pressure in the sealed type Ni/MH battery using Zr-Ti-Mn-V-Ni alloy system is mainly due to the accumulation of oxygen gas during charge/discharge cycling. The accumulation of oxygen gas arises mainly due to the low rate of oxygen recombination on the MH electrode surface during charge/discharge cycling. The difference of oxygen recombination rate between $AB_5$ type electrode and Zr-Ti-Mn-V-Ni electrode is caused by the difference of electrode reaction surface area resulting from different particle size after their activation and the difference of surface catalytic activity for oxygen recombination reaction, respectively. After EIS analysis, it is identified that the surface catalytic activity affects much more dominantly on the oxygen recombination reaction than the reaction surface area does. In order to suppress the inner cell pressure of Ni-MH battery where Zr-Ti-Mn-V-Ni is used as anode, it is suggested that the surface catalytic activity for oxygen recombination should be improved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.349-349
• /
• 2010

Great performance of many semiconductor devices requirs the use of low-resistance ohmic contact. Typically, transmission line method (TLM) patterns are used to measure the specific contact resistance between silicon and metal. In this works, we investigate contact resistance for metal dependent (Cr/Ag, Ni) using TLM pattern based on silicon-on-insulator (SOI) wafer. The electrode with Ni linearly increases contact resistance as the pattern distance increase from $15{\mu}m$ to $75{\mu}m$ in accumulation part, but non-linearly increase in inversion part. In additional, the electrode with Cr/Ag linearly increases contact resistance as the pattern distance increase from $15{\mu}m$ to $75{\mu}m$ in inversion part, but non-linearly increase in accumulation part.

• Advances in environmental research
• /
• 제3권4호
• /
• pp.321-335
• /
• 2014

Eight trace metals, Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn, were measured in the urban soil of Guwahati City, Assam, India from 31 sites representing five different types of land use, residential, commercial, industrial, public utilities, and roadside. Cd and Co occurred in very low concentrations (Cd << Co) in all types of land use without any significant variation from one type of land use to another. Ni concentrations were more than those of Co, and the concentrations depended on land use pattern. Average Cr and Cu concentrations were ${\geq}100mg/kg$, but Cr had a significantly higher presence in industrial land use. Pb concentrations showed similar trends. The two metals, Mn and Zn, were present in much larger amounts compared to the others with values ${\geq}300mg/kg$. Industrial and roadside soil contained much more Mn while commercial soil was enriched with Zn. Toxicity Characteristic Leaching Procedure (TCLP) was used for elucidating the mobility characteristics of the eight heavy metals. Mn suffered the highest leaching from commercial land (9.9 mg/kg on average) and also from other types of land. Co, Cu and Pb showed higher leachability from commercial soils but the leached concentrations were less than those of Mn. The two metals, Zn and Ni, were leached from residential land in considerable amounts. The TCLP showed Mn to be the most leachable metal and Cr the least.

• 한국분말재료학회지
• /
• 제21권1호
• /
• pp.34-38
• /
• 2014

Cu-Ni alloys with unidirectionally aligned pores were prepared by freeze-drying process of CuO-NiO/camphene slurry. Camphene slurries with dispersion stability by the addition of oligomeric polyester were frozen at $-25^{\circ}C$, and pores in the frozen specimens were generated by sublimation of the camphene during drying in air. The green bodies were hydrogen-reduced at $300^{\circ}C$ and sintered at $850^{\circ}C$ for 1 h. X-ray diffraction analysis revealed that CuO-NiO composite powders were completely converted to Cu-Ni alloy without any reaction phases by hydrogen reduction. The sintered samples showed large and aligned parallel pores to the camphene growth direction, and small pores in the internal wall of large pores. The pore size and porosity decreased with increase in CuO-NiO content from 5 to 10 vol%. The change of pore characteristics was explained by the degree of powder rearrangement in slurry and the accumulation behavior of powders in the interdendritic spaces of solidified camphene.

• 환경생물
• /
• 제22권1호
• /
• pp.120-126
• /
• 2004

수경 재배된 케냐프의 중금속 축적량 및 제거량을 파악하고 서로의 관계를 도출하기 위하여 Cd, Cu, Cr, Ni 및 Zn이 포함된 반응조에 노출시켰다. 대상식물의 최적성장을 위한 pH, DO, 전도도 및 영양염의 농도조절은 액체비료를 이용하여 조정하였다. 8일의 수리학적 체류시간을 적용했을 때 Cr, Cd, Cu, Ni 및 Zn의 제거율은 각각 90.5%, 80.5%, 66.1%, 71.1% 및 79.4%였고 그 농도는 각각 2.34에서 0.54 mg $L^{-1}$까지, 3.37에서 1.07 mg $L^{-1}$까지, 4.92에서 3.19 mg $L^{-1}$까지, 6.31에서 4.41 mg $L^{-1}$까지, 6.27에서 2.09 mg $L^{-1}$까지 줄었다. 특히 Cr, Cd, Cu, Ni 및 Zn의 축적율은 각각 원소별로 347.32 and 275.39, 157.52, 50.48 및 211.01 mg DW kg $L^{-1}d^{-1}$로 나타남으로써 본 연구의 결과 케냐프는 Cr, Cd과 Zn을 효율적으로 제거하는 식물임을 확인할 수 있었다. 최대제거율을 나타냈던 시점에서 Cr, Cd, Cu, Ni 및 Zn의 제거량에 대한 축적비율은 43.4%, 39.9%, 21.4%, 5.6% 및 14.5%로 나타났으며, 이와같은 생체내로의 축적과 더불어 rhizosphere에서나 잎을 통한 또 다른 기작에 의해 제거되는 것을 추정할 수 있으며 이는 밝혀야할 숙제로 대두되었다. 원소별로는 다른 원소에 비해 Cr, Cd및 Zn이 효율적으로 축적됨을 알 수 있었다.