• Korean Journal of Oriental Medicine
• /
• v.6 no.1
• /
• pp.117-122
• /
• 2000

The purpose of this study is to compare the contents of heavy metals of boiled ssangwhatang with those of herbal ingredients which are composed of ssangwhatang. Ssangwhatang is used for antifatigue, tonic and so on. With industrial development, our environment has been very polluted. Herbal medicines also are seriously contaminated by heavy metals and pesticides. The herbal medicines of ssangwhatang were bought at 10 defferent markets. The contents of 14 heavy metals(Ag, As, Ba, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sb, Sn, Zn) were analysed using ICP. It was found out that 7 heavy metals(Pb, As, Ba, Cd, Hg, Sb, Sn) were not detected at all in boiled ssangwhatangs. But they were detectable in all ssangwhatangingredients before boiling. For example, the content of Pb in one pack of ssangwhatang before boiling was $0.039^{\circ}{\pm}0.005mg$ and Pb in boiled one was not detected. Herbal medicine itself is seriously contaminated by heavy metals. These results suggest that boiled ssangwhatang which we take is safe from the contamination of heavy metals.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.110-113
• /
• 2003

여러가지 Sn-Ag-Cu 솔더조성과 솔더링 후의 냉각속도에 따라 솔더링 접합부에서의 계면 미세조직의 다양한 변화를 관찰해 보았다. 현재까지 Sn-Ag-Cu 3원계 공정점에 대한 정확한 연구가 미흡하고, 상용으로 제품화되고 있는 Sn-Ag-Cu 합금계는 3원계 공정조성에서 약간 벗어난 조성들을 선택하고 있다고 할 수 있다. 따라서, 본 연구에서 사용한 Sn-Ag-Cu 합금 조성은 Sn-3.5Ag, Sn-3Ag-0.7Cu, Sn-3Ag-1.5Cu, Sn-3.7Ag-0.9Cu, Sn-6Ag-0.5Cu로 선택하였으며, 각 조성에서 Lap Shear Joint를 제조하였다. 사용한 Solder pad는 Cu pad와 Cu pad 위에 Au/Ni를 plating한 것을 이용하였다. 리플로우 솔더링 조건은 $250^{\circ}C$ 이상의 온도에서 60초 실시하였으며, 리플로우 솔더링 후의 냉각속도를 달리하여 냉각시켰다. 솔더링 후의 냉각속도가 느려질수록 계면 금속간화합물(IMC)의 두께가 더욱 증가하며, 조대화되었다. 또한 솔더 조성의 영향에서 Cu와 Ag의 함량이 높을수록 계면 IMC의 두께가 증가되었으며, 이는 솔더내부에 형성된 IMC 입자들이 조대화되어 계면 IMC층에 결합되어 나타났기 때문이다.

• 한국지구과학회:학술대회논문집
• /
• 2006.02a
• /
• pp.111-115
• /
• 2006

최근 경기도 가평지역에서 새로운 철운석이 발견되었으며, 이는 한반도에 낙하(fall) 또는 발견(find)된 운석 중 다섯 번째 기록이다. 가평운석(가칭)은 북위 $37^{\circ}52'08'$, 동경$127^{\circ}27'54'$, 고도 147m 지점에서 발견되었으며, 운석의 분류상 철운석에 속한다. 가평운석의 표면은 지표상에서 풍화를 받은 흔적이 나타나나, 내부는 비드만스태튼 무늬(Widmanstatten pattern)와 같은 철운석의 특징이 잘 보존되어 있다. 가평운석의 암석학적, 광물학적 기재와 분류를 위해 주사전자현미경(Scanning Electron Microscope) 및 전자 현미분석기(electron probe micro-analyzer)를 이용했다. 풍화의 산물인 철산화물이 나타나는 최외각부를 제외하면 가평 운석은 거의 순수한 철-니켈 금속광물(Fe-Ni metal)로 이루어져 있다. 이 중 니켈 함량이 적은 카마사이트(kamacite)가 대부분이며 소량의 태나이트(taenite)가 산출되어 비드만스태튼 무늬를 구성한다. 비드만스태튼 무늬의 특징에 의한 분류에 따르면 가평운석은 중립질 또는 조립질 옥타헤드라이트(octahedrite)에 속한다. 철운석은 화학적으로 열 개 이상의 하부그룹으로 세분되며, 가평운석의 정확한 하부그룹으로의 분류는 친철원소에 대한 미량분석이 추가적으로 필요하다. 가평운석의 냉각률은 $^{\sim}1^{\circ}C/Ma$이하로 나타나며, 이는 가평운석이 천천히 냉각된 비교적 규모가 큰 소행성의 핵에서 유래했음을 지시한다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.237-240
• /
• 2000

서울시 암반 지하수의 수리지구화학 및 오염 특성을 토지 이용 특성과 관련하여 시.공간적 측면에서 체계적으로 고찰하고자 3년간에 걸친 모니터링을 수행하고 있다. 본 논문에서는 1차년도 취득 자료에 대한 예비 고찰 결과를 소개한다. 서울시 암반 지하수의수질 유형은 Ca-HCO$_3$ 유형으로부터 Ca-Cl(-NO$_3$) 유형에 걸쳐 폭넓게 분포한다. 서울시 동부 지역 지하수의 경우, 중랑천을 중심으로 상류에서 하류 지역으로 가면서 용존고체함량(TDS)이 높아지는 경향이 있다. K, Ca, Mg 등 주요 양이온과 Ba, Fe, Sr 등 미량원소도 유사한 공간적 분포 특성을 보여준다. 이러한 수질 항목은 대체적으로 지하수 유동에 수반된 수/암 반응의 증가를 잘 반영하는 것으로 해석된다. 반면, NO$_3$, Cl 등 음이온의 변화는 다소 불규칙하여 지역적인 토지이용 특성과 관련한 오염 요인의 기여를 반영한다. 한편, 도시 특성에 따라 서울시 암반 지하수의 수질특성을 전반적으로 고찰한 결과, 외곽의 비오염 지역에 비하여 중심부의 교통혼잡 지역, 남서부의 공단 지역, 서부와 남부의 농업 지역에서 뚜렷한 수질 저하를 보여주었다. 이러한 경향은 특히 Na, Cl, NO$_3$, SO$_4$, Ni, Pb, Se 등의 수질 항목에서 뚜렷하게 나타난다.

• Applied Microscopy
• /
• v.7 no.1
• /
• pp.45-49
• /
• 1977

For obtaining high manganese steel plates, the study has been made on the optimum conditions in melting, forging, rolling and water toughning treatment practices. The optimum water toughning temperature and time was found to be $1030^{\circ}C$ and 30 min. respectively for the plates of 1 mm thickness. The argon atmosphere is very effective for the prevention of decarburization which can be easily occured in open air. There is a close relation between the degree of c 이 d working and the hardess. The greater the cold reduction ratio is, the smaller the grain size is and it results in the increase of hardness. The improvement of tensile and bending properties can be made by the addition of small amount of nickel, chromium and vanadium.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.1
• /
• pp.16-22
• /
• 2006

Mineral and heavy metal contents were determined in three brown edible seaweeds (sea mustard, Undaria pinnatifida; seaweed fusiforme, Hizikia fusiforme; sea tangle, Laminaria japonica) collected from Gijang and Wando in Korea, and two green seaweeds (sea lettuce, Enteromorpha prolifera; green laver, Monostroma nitidum) collected from Gijang. Seaweeds contained high proportions of ash (13.8-24.8%) and sulfate (1.08-3.25%). In brown seaweeds, ash contents (24.5-24.8%) were higher than in green seaweeds (13.8-15.2%). The differences of mineral contents were remarkable in both Gijang and Wando and in 5 various kinds of seaweeds. Brown seaweeds contained higher amounts of both macro-minerals (657-13,947 mg/100 g; Ca, Mg, Na, K) and trace elements (0.27-12.98 mg/100 g; Fe, Al, Zn, Mn, Cr, Cu, Ni), and green seaweeds also had relatively higher amounts of both macro-minerals (233-5,279 mg/100 g) and trace elements (0.26-10.61 mg/100 g).

• Journal of the Korean Society of Safety
• /
• v.20 no.4 s.72
• /
• pp.1-8
• /
• 2005

Effects of Nb(Niobium) contents and solution annealing on the strength and fatigue life of 18%Ni maraging steel commonly using in aircraft, space field, nuclear energy, and vehicle etc. were investigated. Also the fatigue life stress intensity factor were compared experiment result and FEA(finite element analysis) result. The more Nb content, the higher or the lower fatigue life on base metal specimens or solution annealed specimens showing that the fatigue lift was almost the same. The maximum stresses of X, Y, and Z axis direction showed about $2.12{\times}10^2MPa,\;4.40{\times}10^2MPa\;and\;1.32{\times}10^2MPa$ respectively. The Y direction stress showed the highest because of the same direction as the loading direction. The fatigue lives showed about 7% lower FEA result than experiment result showing almost invariable error every analyzed cycle. Stress intensity factor of the FEA result was lower about $3.5{\sim}10%$ than that of the experiment result showing that the longer fatigue crack length the higher error. It considered that the cause for the difference was the modeled crack tip having always the same shape and condition regardless of the crack growth.

• Journal of Environmental Impact Assessment
• /
• v.9 no.1
• /
• pp.1-11
• /
• 2000

An environmental geochemical survey of heavy metal distribution in marine surface sediments around the ocean of Samcheonpo coal-fired power plant was conducted to investigate the possibility of coal-ash leakage from ash pond and the associated heavy metal pollution in sedimental deposits due to the operation of the coal-fired power plant. The X-Ray Diffractometry (XRD) analysis showed that the main leakage point of coal-ash was limited to a single site of the first ash pond. It also appeared that the amounts of organic carbon and metal elements were positively correlated to the grain size distribution, and that Co, Cr, Cu, Fe, Ni, and Zn were bounded to organic ligands. However, the distributions of Cd, Hg, and Mn did not have any significant correlation with the sediment grain size and organic matters. In particular, the distribution of Cd appeared to be affected by the concentration of the carbonate materials in the study area.

• Transactions of Materials Processing
• /
• v.23 no.5
• /
• pp.303-310
• /
• 2014

Functionally graded properties are characterized by the gradual variation in composition and structure through the volume of the material, resulting in corresponding gradation in properties of the material. Direct laser melting (DLM) is a prototyping process whereby a 3-D part is built layer-wise by melting metal powder with laser scanning. Studies have been performed on the functionally graded properties induced by direct laser melting of compositionally selected metallic powders. For the current study, quadrangle structures were fabricated by DLM using Fe-Ni-Cr powders having variable compositions. Hardness and EDX analysis were conducted on cross-sections of the fabricated structure to characterize the properties. From the analysis, it is shown that functionally graded properties can be successfully obtained by DLM of selected metallic powders with varying compositions.

• Journal of Technologic Dentistry
• /
• v.8 no.1
• /
• pp.51-55
• /
• 1986

The castability of base metal alloys for dental casting in influenced by burn-out temperature and recent percentage. Burn-out temperatures for casting are set at 200$^{\circ}F$ interval from 1000$^{\circ}F$ to 1800$^{\circ}F$. According to recast metal percent in new cast alloy metal alloys are tested. The results are as followings: 1. In the new alloy(100%), the castability is the most. 2. The burn-out temperature in 1600$\sim$1800$^{\circ}F$, castability of 100% new alloy was more four times than of 50% new alloy plus 50% recast alloy. The using of 50% new alloy and 50% recast alloy, therefore, was unlike in castability. 3. The burn-out temperature in 1600$^{\circ}F$, castability of 100% new alloy was more than four times in soaking 20 minutes, but there was no any difference at 18700$^{\circ}F$. 4. It is investigated that the optimal burn-out temperature is 1600$^{\circ}F$ for the C & B alloy.