• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.1
• /
• pp.19-28
• /
• 2008

Effect of Water Treatment Sludge(WTS) on trace metals content in Sorghum(Sorghum bicolor(L.) Moench) was investigated. At this report measuring of nickel(Ni) content of the forage was presented. Four treatments, Control, Compost, Alum+(nitrogen, phosphorus, potassium)(NPK), Compost+NPK, were applied to the sorghum in a mountainous place near the Joongbu University. With the 1, 3, 5 hours conditions, the background value was the least on the 5 hours warming up of the AA-680 spectrophotometer, and on the condition(mean/SD) of absorbances of Ni observed was the most. It is necessary in Ni analysis warming up for longer period around 5 hours for this type of apparatus. And we think that the difference of warming time for Ni analysis in order to carry out better measuring; the reason might be the larger bonding energy of Ni than those of Cu, calcium(Ca), magnesium(Mg) and (potassium)(K).

• Journal of the Korean earth science society
• /
• v.24 no.8
• /
• pp.711-720
• /
• 2003

To study characteristics of the heavy metal pollution, sediment samples were collected at 67 sites on the roadside of Jeonju city during summer and winter, 2002. The total concentration of metals including Cd, Co, Cr, Cu, Ni, Pb, Zn, and Mn in the sediment samples were determined. The results indicate that the roadside sediments in Jeonju city have lower (1/2 to 1/7 times) concentrations of Zn, Cu, Pb and Cd than the metal concentrations previously reported for roadside soil, dust and sewage sludges in Seoul. However, the metal concentrations are higher than environmental quality criteria in soil suggested from several countries, and Zn, Cu, Pb and Cd contents are usually 2-7 times higher than the world average contents of the metals in natural soil. Although pollution index and concentrations of Cr, Ni, Pb and Zn in the roadside sediments at industrial area were usually higher than those of downtown and residential area, the metal having small vehicle- and steel-related industries had high concentrations of metals. The results of chemical partitioning analysis showed that Pb, Zn and Mn are mainly associated with carbonate/adsorbed and Fe-Mn oxide phases but that Cu is largely associated with the organic and sulfide fractions. It thus indicates that both large and small (vehicle- and steel-related) industries are main sources of heavy metal contamination. Due to high solubility of the carbonate phases by natural leaching episodes, the carbonate/adsorbed Cd, Co, Ni, Pb, Zn and Mn in the roadside sediments may serve as a potential source of contamination.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.20 no.4
• /
• pp.159-168
• /
• 2015

Forty-four surface sediments from Doam Bay were analyzed for total organic carbon (TOC), total nitrogen (TN), total metal (Al, Fe, Mn, Cr, Cu, Ni, Pb, Zn) and further chemical partitioning of metals were carried out in some samples. The TOC (0.32~3.10%) and TN (0.03~0.26%) values of the samples were similar to those of other coastal area. The C/N ratios ranged from 7.9 to 11.9 with an average 9.3 which revealed that contribution of terrestrial organic matters was relatively rare. Contents of analysed metals showed a level lower than threshold effects level (TEL) in sediment quality guidelines. Based on the chemical speciation of metals, the lattice fractions were found in the order Cr > Cu > Ni > Zn > Pb > Mn, while Mn and Pb are the ratio of the non-lattice fractions accounted for more than 50%. The average baseline values were obtained relative cumulative frequency curves and linear regression analysis. The respective baseline concentrations for Cu, Ni, Pb, Zn, Cr and Mn were 11.8, 23.1, 26.8, 76.6, 56.7, 585 mg/kg, respectively. Based on geoaccumulation index ($I_{geo}$) with a baseline values of Mn showed that face the contamination phase from estuarine stations. However, in case of Zn and Pb, although there is no sign of contamination, it could be release from sediment when there is a change in the environment, which is caused from the high ratio of non-lattice fractions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.326-326
• /
• 2015

본 연구에서는 전해도금을 이용하여 Ni-Pd 합금도금을 형성한 후 열처리 효과를 분석하였다. 전류밀도 $0.2{\sim}1.5A/dm^2$, $PdCl_2$ 1~5mM의 변화를 통해 Ni-Pd 합금도금의 함량을 변화시켰고 $100{\sim}400^{\circ}C$의 열처리를 하였다. 열처리 온도가 올라갈수록 경도는 급격히 떨어졌고 $300^{\circ}C$이후에서는 감소하였으나 감소폭이 작았다. 경도의 감소 원인은 열처리 후 Grain Size가 커지는 현상 때문이고 이는 XRD를 통해 확인하였다. 면저항의 경우 열처리를 하였을 경우 급격히 감소하고 $100^{\circ}C$ 이후에는 일정하였다.

• Journal of the Korean Ceramic Society
• /
• v.37 no.9
• /
• pp.921-926
• /
• 2000

에틸렌과 프로판가스로부터 Ni 및 Ni-Cu의 합금촉매를 사용하는 화학증착반응에 의해 제조한 나노탄소섬유에 충전재로 하고, 환경 친화적인 폴리비닐알코올을 매트릭스로 이용하여 복합재를 제조하여 전자파 차폐효능을 조사해 보았다. 전자파 차폐용 충전재의 중요한 물성치인 전기전도도는 나노탄소섬유의 반응조건에 따라 매우 민감하게 변했는데, 전체적으로 10000 psi 압력에서 4.2~29 S/cm 사이에 분포하였고 합금촉매보다도 순수한 Ni로 제조된 나노탄소섬유의 전기전도도 값이 높았다. 한편, 나노탄소섬유/폴리비닐알코올 복합재의 전기전도도는 Ni:Cu(7:3) 합금촉매에서 제조된 나노탄소섬유를 충전시켰을 때, 가장 높게 얻어져서 충전재의 전기전도도 외에도 비표면적이 중요한 변수임을 알 수 있었다. PVA 양에 대한 나노탄소섬유의 함량이 증가할수록 나노탄소섬유 복합재의 전기전도도는 기하급수적으로 증가했고, 110$0^{\circ}C$에서 1시간 동안 나노탄소섬유의 열처리를 통하여 복합재의 전기전도도는 5~7배 증가하였으며, 전자파 차폐율은 2~3 dB 정도 향상시킬 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.226.1-226.1
• /
• 2010

본연구에서는 GTL(gas to liquids)공정의 합성가스 생산을 위해 수증기-이산화탄소 복합개질반응(Combined Steam and Carbon dioxide Reforming of Methane, CSCRM)을 수행하였다. CSCRM은 수증기와 이산화탄소의 공급비 조절을 통해 $H_2$/CO비를 2로 맞추기 용이한 장점을 지니고 있어 다른 단일 개질 반응과 달리 합성가스 생산 시 $H_2$/CO 비율을 조절하기 위한 부가적인 공정이 필요하지 않아 경제적인 공정이다. 일반적으로 사용되는 Ni개질촉매는 가격대비 우수한 성능을 보이지만 S/C비가 낮은 CSCRM의 경우 촉매표면의 탄소침적에 의한 비활성화가 야기되는 문제점이 있다. 따라서 본 연구에서는 산소저장능력과 산소전달능력이 우수한 $CeO_2$를 조촉매로 첨가하여 표면에 형성된 코크 제거가 용이하도록 하였다. Ni-Ce/$MgAl_2O_4$촉매는 동시함침법(co-impregnation)으로 제조하였으며, Ni의 함량을 10wt%로 고정한 상태에서 Ce의 함량을 조절하여 Ce/Ni 최적비를 찾고자 하였다. XRD, TPR, BET, $H_2$-Chemisorption과 같은 촉매의 특성분석을 통해 촉매의 비표면적, 환원특성과 Ni입자의 분산도 등을 확인하였다. Ce를 첨가함에 따라 Ce2.5wt%까지는 비표면적이 증가하다가 이후 점차 줄어드는 경향성을 보였다. 또한, $H_2$-Chemisorption 결과 역시 비표면적과 유사한 경향성을 보였는데, Ce5.0wt%까지 Ni 분산도가 증가 하다가 다시 감소하는 것을 확인할 수 있었다. 반응실험은 $H_2O:CO_2:CH_4:N_2$ = 0.8:0.4:1:1의 공급조건에서 수행하였으며, 질소와 수소 환원분위기로 $700^{\circ}C$에서 1시간 환원 후 $650^{\circ}C$에서 $550^{\circ}C$범위로 온도를 떨어뜨려가면서 반응을 수행하였다. Ce를 첨가함에 따라 $CH_4$ 전환율이 증가를 하다가 Ce2.5wt% 이후 감소하는 것을 확인할 수 있었다. 이러한 높은 촉매 활성은 Ce 첨가로 인해 환원특성이 좋아지고 Ni분산도가 증가하여 담체와 강한 상호작용(SMSI)을 형성함으로 탄소침적 저항성 강화에 기인한 것이다.

• 한국해양학회지
• /
• v.29 no.4
• /
• pp.338-356
• /
• 1994

Sediment samples from the continental shelf of the South Sea of Korea are analysed to determine the concentration of Al, Fe, Mn, cu, Ni, Zn, Co, Cr and Pb. among these samples, fine-grained sediments were also analysed by a sequential extraction technique to know geochemical forms of the metals in this environments. The total concentration of Al, Fe, Cr, Ni, Cu and Zn in bulk sediments decreased gradually with the increase of distance from the coastal zone. This distribution patterns are well coincide with grain size distribution. However, the patterns of Mn, co and Pb do not follow such and overall distribution. The concentration of Pb, particularly, did not show any features in areal distribution, which may be result from different pathways to the sediments, compared to the other metals. the speculation data show that a considerable amount of Cd, Mn and Co are bounded in the carbonate fraction, accounting for 42.8%, 40.3% and 30.6%, respectively. Cu, Zn, Mn and Fe are largely associated to oxide fraction with proportions of 34.4%, 23.1%, 15.5% and 13.7%, respectively. However, the metals in residual fraction account for more than 50% of the total metal concentration, except for Mn. These observations emphasize that residual fraction in the dominant component controlling the elemental concentration.quartz and glauconite grains.Accordingly,these sediments are interpreted as an extension part of transgressive sand deposit that are widely distributed on the continental shalf floor of southern Yellow Sea.

• Environmental Analysis Health and Toxicology
• /
• v.4 no.1_2
• /
• pp.35-45
• /
• 1989

Studies on the heavy metal content of ginkgo leaves growing in all around Seoul. This study was carried out to investigate the concentration of heavy metals and soluble sulfur in ginkgo leaves. These leaves are found growing in park, residential, commercial and industrial areas all around Seoul. These analyzed the quantity of Cd, Co, Cu, Fe, Mn, Ni, Pb, Zn, Hg and soluble surfur in separate samples of washed and unwashed leaves. The results were as follows: 1. This order of heavey metal concentration was found in Seoul area,: Fe＞Mn＞Zn＞Ni＞Pb＞Cu＞Co＞Cd＞Hg. 2. Pb concentration was higher in the commercial area than in the other areas, and it concentration in washed leaves was higher 96～100% and unwashed leaves 85～170%. 3. In the residential area Ni concentration was significantly higer where about seven times more Ni as found on the top part of the leaves. 4. Water soluble surfur was higest in the inudstrial area, but the percentage on top of the leaves was only 0.04～0.05% simillar with other area. 5. Fe, Zn and Ni were almost positively correlated to each component but negatively correlated between Mn and souble sulfer. All of content except Mn and Ni were significance between each area in washed and unwashed leaves.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.103.2-103.2
• /
• 2018

(주)PMPT사는 국내 뿌리산업 분야의 Zn-Ni자동차부품 도금업체로서 남동공단에 위치하고 있다. 하지만 자동차품질 향상에 기본이 되는 도금 기술자료가 부족하여 연구개발에 많은 어려움을 겪고 있다. 또한 미래자동차용 용접부품의 도금 품질향상을 위한 최신 기술정보제공이 필요한 실정이다. 이에 다년간 이론과 경험을 겸비한 도금전문가의 활용이 필요한 실정이다. '아직도 녹슨 자동차를 탈 것인가?' 지난 2003년부터 10년간 '녹슬지 않는 자동차', '녹과의 전쟁'을 목표로 자동차부픔의 품질기술지도가 실시되었다. PMPT사도 이에 동참하여 자체의 경험과 기술로써 용접부 품질을 개선하여 왔다. 하지만 경험에 의존해 왔던 PMPT사 자체의 도금기술로써는 유렵의 BMW사나 Toyota사의 Zn, Zn-Ni 합금도금에 대한 기술변화와 수출경쟁에 대처하기가 어려운 실정이다. 특히 용접부는 자동차 사고의 치명적 결함이다. 이에 도금전문가를 활용하여 해외의 선진도금 기술정보제공과 함께 미래의 자동차부품 품질향상을 위한 기술지원을 실시하였다. 세부적인 기술지원 내용으로서는 Zn, Zn-Ni합금도금제품 용접부품에 6가 Cr을 사용하지 않는 친환경 Chromate Free, Zn-Ni합금도금 용접부 내식성 향상을 위한 Ni의 최적함량과 메커니즘을 지원하였다. 필자가 도금현장에서 근무하면서 터득한 까다롭고 어려워하는 도금기술과 최신의 해외 Chromate Free표면처리 기술을 제공함으로써 수출향상과 품질기술력 향상에 이바지 하고자 하였다.

• Journal of the Korean Magnetics Society
• /
• v.5 no.1
• /
• pp.27-33
• /
• 1995

The microwave absorbing characteristics and complex permeability of $Ni_{2-x}Zn_{x}Y$ - rubber composites with variation of composition and particle size were investigated. With a ferrite particle with a diameter of about $1\mu\textrm{m}$, only spin rotational resonance was observed. This behavior probably due to the particle being sufficiently small to approach single domain characteristics so that only spin rotations can occur. The first matching frequency, found in $Ni_{2-x}Zn_{x}Y$ - rubber composites, which was higher than that of spin rotational resonance, increased with spin rotational resonance frequency. It is also found that the second matching frequency is independent of spin rotational resonance frequency. Based on these findings, it could be concluded that the microwave absorbing characteristics were caused by only one type of resonance, the spin rotational resonance.