• 대한치과기공학회지
• /
• 제36권3호
• /
• pp.141-147
• /
• 2014

Purpose: Dental casting #Gr I (Co-25Cr-5Mo-3Sn-1Mn-1Si), #Gr II (Co-25Cr-5Mo-5Cu-1Mn -1Si) and #Gr III (Co-25Cr-5Mo-3Sn-5Cu-1Mn-1Si) master alloys of granule type were manufactured the same as manufacturing processes for dental casting Ni-Cr and Co-Cr-Mo based alloys of ingot type. These alloys were analyzed melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: These alloys were manufactured such as; alloy design, the first master alloy manufatured using vacuum arc casting machine, melting metal setting in crucible, melting in VIM, pouring in the mold of bar type, cutting the gate and runner bar and polishing. These alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer indicated alloys in the crucible were set and operated. Results: The melting temperatures of these alloys measuring infrared thermal image analyzer were decreased in comparison with remanium$^{(R)}$ GM 800+, vera PDI$^{TM}$, Biosil$^{(R)}$ f, WISIL$^{(R)}$ M type V, Ticonium 2000 alloys of ingot type and vera PDS$^{TM}$(Aabadent, USA), Regalloy alloys of shot type. Conclusion: Co-Cr-Mo based alloy in addition to Sn(#Gr I alloy) were decreased the melting temperature with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer.

• 대한치과보철학회지
• /
• 제42권6호
• /
• pp.654-663
• /
• 2004

Statement of problem. According to the fracture pattern in several reports, fractures most frequently occur in the interface between the ceromer and the substructure. Purpose. The aim of this in vitro study was to compare the macro shear bond strength and microshear bond strength of a ceromer bonded to a fiber reinforced composite (FRC) as well as metal alloys. Material and methods. Ten of the following substructures, type II gold alloy, Co-Cr alloy, Ni-Cr alloy, and FRC (Vectris) substructures with a 12 mm in diameter, were imbedded in acrylic resin and ground with 400, and 1, 000-grit sandpaper. The metal primer and wetting agent were applied to the sandblasted bonding area of the metal specimens and the FRC specimens, respectively. The ceromer was placed onto a 6 mm diameter and 3 mm height mold in the macro-shear test and 1 mm diameter and 2 mm height mold in the micro-shear test, and then polymerized. The macro- and micro-shear bond strength were measured using a universal testing machine and a micro-shear tester, respectively. The macro- and micro-shear strength were analyzed with ANOVA and a post-hoc Scheffe adjustment ($\alpha$ = .05). The fracture surfaces of the crowns were then examined by scanning electron microscopy to determine the mode of failure. Chi-square test was used to identify the differences in the failure mode. Results. The macro-shear strength and the micro-shear strength differed significantly with the types of substructure (P<.001). Although the ceromer/FRC group showed the highest macroand micro-shear strength, the micro-shear strength was not significantly different from that of the base metal alloy groups. The base metal alloy substructure groups showed the lowest mean macro-shear strength. However, the gold alloy substructure group exhibited the least micro-shear strength. The micro-shear strength was higher than the macro-shear strength excluding the gold alloy substructure group. Adhesive failure was most frequent type of fracture in the ceromer specimens bonded to the gold alloys. Cohesive failure at the ceromer layer was more common in the base metals and FRC substructures. Conclusion. The Vectris substructure had higher shear strength than the other substructures. Although the shear strength of the ceromer bonded to the base metals was lower than that of the gold alloy, the micro-shear strength of the base metals were superior to that of the gold alloy.

• 한국산업보건학회지
• /
• 제16권2호
• /
• pp.131-144
• /
• 2006

For the purpose of preparing the fundamental data on working environment of small scale manufacturing industries and preventing the occupational diseases of workers in these industries, authors surveyed the status of working environment to several chemical substances and physical agents by types of industry and types of process in the small scale manufacturing industries with less than five workers in Gimhae including 235 workplaces, 14 types of industry and 25 types of process from January 2002 to December 2004. This measurement method was work environment measurement method (established in Ministry of Labor, Korea), analytical methods (2nd Ed.) of Occupational Safety and Health Administration (OSHA) and manual of analytical methods (4th Ed.) of National Institute for Occupational Safety and Health (NIOSH) and collected data was analyzed by using SPSS 10.0 for windows, the results were as follows: 1. Noise generated in 14 types of industry and 22 types of process. an actual level of mean exposure (90.7 dB(A)) exceeded threshold limit values (TLVs) in manufacture of other transport equipment. An actual level of mean exposure (90.2dB) exceeded TLVs in the process of wire-drawing and 90.4dB in the process of wire-stranding. 2. Dusts of type I, II, III were generated in 9 types of industry and 8 types of process. Its mean concentration did not exceed TLVs. 3. Heavy metals (Pb, Mn, Cr, Ni) were generated in 7 types of industry and 7 types of process. Its mean concentration did not exceed TLVs. 4. 16 kinds of organic solvents were generated in 11 types of industry and 6 types of process. Its mean concentration did not exceed TLVs. As the above results, chemical substances and physical agents were generated in the several different types of industry and process of the manufacturing industry with less than five workers, and only mean level of noise was exceeded TLVs. In case of exceeding threshold limit values, improvement of work environment is actively needed, and work environment management should be performed continuously for prevention of an occupational diseases and work related diseases.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1994년도 추계학술대회강연 및 발표대회 강연및 발표논문 초록집
• /
• pp.15-15
• /
• 1994

M MA ODS 합금의 보다 폭넓용 실용확훌 위해 크게 요구되고 있는 적정 접합기술 개발의 한 방안￡로, 마찰압접(Friction Welding) 방법의 가능성옳 조사하기 위하여 마찰압력과 시간, 마 찰 후 접촉압력(Upset Pressure) 풍을 다양하게 변화시켜 접합체톨 제조한 후, 접합체 강도에 대한 인장시험과 접합계연의 결합 및 미세구조에 대한 현미경 관찰, EDS에 의한 원소분석, 접 합이옴부의 경도분포와 파단면 분석 풍율 행하였다. 실험에 사용된 모재는 기계적 합금법으로 제조된 Inca사의 Ni기 MA 754 합금이었으며, 직경 l 10 mm, 길이 50 mm로 가공한 후, 아세통￡로 초음파 세척하여 접합에 사용하였다. 접합온 브 레이크식 마찰압접기틀 사용하여 행하였으며, 회전시험편의 회전수는 2400 rpm이었A며, 다른 한쪽의 고정시험편과의 마찰압력 및 마찰시간온 각각 50 - 500 MPa과 1-5초로, 또한 업셋압 력도 50 - 600 MPa로 변화시켰다. 이때 업셋압력은 모든 시편에 대해 일정하게 6초동안 가하 였다. 얻어진 접합체는 각 압접조건 당 2개 이상의 접합시험편에 대해 상온 인장강도톨 측정하 였으며, 파단이 일어난 위치를 확인한 후 파면에 대한 분석율 주사전자현미경(SEM)과 에너지 분산형 분광분석기mDS)릎 사용하여 행하였다. 컵합이옴부의 첩합성올 확인하기 위하여, 접합 체를 접합변에 수직으로 절단, 연마한 후 광학현미경과 SEM, EDS 퉁으로 관찰, 분석하여 접 합부의 형상과 결합형성 여부, 접합계면의 미세조직 퉁옳 조사하였다. 또한 마찰압접에 따론 모재와 접합계연부의 경도분포훌 접합이옴부로부터 모재쪽으로 일정 간격율 두어 마이크로 비 커스 경도기로 측정, 조사하였다. 이상의 설험 결과, 다옴과 같온 결론옳 얻었다. ( (1) 접합체 강도가 모채 강도의 95% 이상이 되는 양호한 렵합체흩 얻기 위한 마찰압력 조건 온, 2400 rpm의 회전속도와 6초의 업셋압력 유지시간에서 마찰압력과 업셋압력, 그리고 마찰시 간이 각각 400 MPa 이상과 500 MPa 이상,2초입율 확인하였다. ( (2) 컵합이옴부의 관찰 결과, 모든 마찰압접 조건에서 컵합이옴부는, 기폰 모재의 texture 조직 을 유지하고 있는 모재부 영역(영역 ill)과 첩합계면부에 인접하여 업셋압력이 주어질 때 단조 효과에 의해 계연 외부로 metal flow가 일어나면서 형성된 영역 II, 매우 미세한 결정립으로 구성된 중앙부의 영역 1 로 이투어져 있옴융 확인하였다. ( (3) 최적접합조건이 충족되지 않온 경우, 접합부의 영역 I 에서 관찰된 void와 균열, 불균일한 접합계면 통의 접합결함에 Al과 Y. Ti 퉁￡로 구성된 산화물률이 용집되어 있옴을 확인하였 다-( (4) 접합체의 파단 양상온 크게 접합부 파단과 모재부 파단, 이률의 혼합형 파단i로 나눌수 있었다. 모재부 파단의 경우, 파단면이 매끄럽고 파변상의 결정립도 매우 미세하였으며, 산확물 의 용집도 찾아보기 어려웠 나, 접합부 파단의 경우에는 파변의 굴곡이 비교척 심하고 연성 입계파괴의 형태를 보였￡며, 결정립도 모채부 파단의 경우에 비해 조대하였다. 조대하였다.

• 한국식품조리과학회지
• /
• 제14권1호
• /
• pp.25-32
• /
• 1998

To measure the contents of several heavy metal elements (Cr, Mn, Ni, Cu, Zn, Cd, Hg, Pb) in Korean seaweeds which are closely related to food resources, various seaweed samples were collected from thirteen to seventeen seaweed-producing districts. The results obtained from the experiment are summarized as follows: 1. The content of heavy metal elements in seaweeds of individual sample ranged from 0.0005 to 25.0373 ppm. Their mean levels were as follows: laver, 0.0024∼3.9297 ppm; sea lettuce, 0.0011∼25.0373 ppm; sea mustard, 0.0005∼23.5071 ppm; sea tangle, 0.0006∼4.8550 ppm. The mean levels of Cd and Pb were specially low in the samples collected from the area II in Kangwon and area Ⅸ in Kyungbook. 2. The mean levels of heavy metal elements of collected samples ranged from 0.0117 to 4.4944 ppm. Laver showed the lowest level of Hg and sea lettuce showed the highest level of Mn. Their mean levels of elements were as follows: laver, 0.0117∼2.3339 ppm; sea lettuce,0.0232∼4.4944 ppm; sea mustard, 0.0129∼1.5139 ppm and sea tangle, 0.0182∼1.7410 ppm. 3. The mean levels of heavy metal elements from several locations ranged from 0.0085 ppm to 8.4148 ppm. The mean levels of heavy metal elements in sea mustard from area V of Kyungbook were the lowest, but the mean levels of heavy metal elements in sea lettuce from area Ⅷ of Kyungnam were the highest. The mean level of heavy metal elements were as follows: laver, 0.3613∼1.1124 ppm; sea lettuce, 0.1415∼8.4148 ppm; sea mustard, 0.0729-3.1182 ppm; sea tangle, 0.0085∼0.7587 ppm. 4. Generally the heavy metal elements were detected in the seaweed samples from all locations. The mean levels of heavy metal elements varied with locations and kinds of samples. The levels of heavy metals of the samples taken from all locations from the East Sea, the South Sea, and the West Sea areas showed 99% safety range.

• Journal of Plant Biology
• /
• 제1권1호
• /
• pp.11-20
• /
• 1958

I. Assumption: Mo-kam-ju, Koelreuteria paniculata is a woody plant mainly cistributed over Northern China. Its sporadic growth along the beaches of Korea and Japan is assumed to have been sowed by the seeds transported adrift on the current across the ocean. II. Use and Growth of the Plant: In China, this plant has been cultivated from early times mainly at temples, it seeds being used as rosaries, its flowers for yellow dyes and medicine for the eyes, and its leaves for black dyes. In Korea and Japan, these plants have been cultivated at temples and used as the material for rosaries. No natural growth of these plants was reported until 1919. III. Discoveries: In this domestic area, Dr. Chung Tae Hyun discovered the plant on the beach between Cho-Do and Chang-san-kot, Hwang-Hae Prov. in 1920. The reporter discovered them on the beach at Buk-Ni, Duk-jok-Do in 1948, at An-Hung in 1956 and on the beach at An-min-Do in 1957. In the Japan area, it was discovered for the first time twenty years ago, mainly along the coast line of the Japan Sea and some along the eastern coast line, at Subo, Yamaguchi Prefecture facing the Pacific Ocean. IV. Study and Experiment: A. Seed The seed coat is thick, non-permeable and floatable. A number of seeds were immersed in artificial sea water and fresh water separately. The seeds remained there for a hundred and forty-five (145) days from April 6, 1957 to August 29, 57. Thirty one seeds out of the fifty immersed in salt water and twenty seeds out of the fifty immersed in fresh water remained on the surface of the water, proving them to be non-permeable to both sea and fresh water. Of course, these had retained their germinating capabilities. Five (5) seeds out of twenty from the fresh water and six (6) out of thirty-one from the sea water were successfully germinated after a hole had been drilled in the seed coat and they had been planted. Thus their floating capability, non-permeability and germinating capability after a possible 145 day trip on the flowing currents has been proved satisfactory according to the assumption made above. B. Current As shown in the Data 2 and 3, the sea current initiated in the Pohai Sea flows westward down along the coast line of Korea reaching the southern part during the autumn and winter seasons. This fact also is in favor of the reporter's assumption. V. Discussion and Conclusion: The reporter concludes that, as discussed above, Koelreuteria paniculata which originates in Northern China is transported adrift on the flowing sea current to our western coast line, and also the coast lines of Shantung and Kuangtung of China and it is germinated on the sandy beaches forming new plants. Thus, the seeds drifted down on the southern beach of Korea and have been transported to the Japanese coast, adrift on the Tae-Ma current. Upon fruition, the seeds of the plants which settle on the coasts of western Korea and Japan will migrate to new places. It can be, however, assumed that while the thickness and nonpermeability of the coat enables the long travel in the water, this also can compose a difficulty in germination, consequently in developing a new distribution of this species.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.758-767
• /
• 1995

The purpose of this study was to evaluate canal shaping ability after canal preparation by using engine-driven nickel-titanium file and endosonic file in curved canals. 30 mesiobuccal canals of molars extracted within recent 3 months were divided into 3 groups. Group I and group II were prepared by using engine-driven nickel-titanium Gates-Glidden drill type and the engine-driven nickel-titanium file type. Group III prepared by using en do sonic file. The image of preinstrumented canals was taken by X-ray. The image of postinstrumented canal was taken by X-ray in the same condition of preinstrumentation. A magnified X-ray image on magnifier screen was traced and then compared the preinstrumentated canal image with the postinstrumentated canal image by superimposing method. The following results were obtained : 1. In the change of canal curvature, the engine-driven nickel-titanium Gates-Glidden drill type showed the least change and the ultrasonically filing showed the greatest change. 2. In the percentage of canal enlargement, the engine-driven nickel-titanium file type was greatest at all level(p<0.05), the apex of all group was the greatest, the difference of ultrasonically filing group showed greater between apex and cervix. 3. The percentage of canal enlargement on convex side was greater than that of on concave side in apex of each group(p<0.05). In the ultrasonically filing group, both sides of canal enlargement showed sharply difference(p<0.01). 4. The percentage of canal enlargement on convex side was greater than that of on concave side in the third of cervix of the engine-driven nickel-titanium file type and the ultrasonically filling. The percentage of canal enlargement of convex and concave side in the third of middle of the engine-driven nickel-titanium Gates-Glidden drill type show a similar canal enlargement between convex side and concave side. As above result, the engine-driven nickel-titanium file type was greater in canal enlargement than the other instruments. The engine-driven nickel-titanium Gates-Glidden dirll type was efficient endodontic instrument for curved canal preparation because it was least change in canal curvature.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.99-99
• /
• 2013

In this talk, I will present two research works in progress, which are: i) mapping of piezoelectric polarization and associated charge density distribution in the heteroepitaxial InGaN/GaN multi-quantum well (MQW) structure of a light emitting diode (LED) by using inline electron holography and ii) in-situ observation of the polarization switching process of an ferroelectric Pb(Zr1-x,Tix)O3 (PZT) thin film capacitor under an applied electric field in transmission electron microscope (TEM). In the first part, I will show that strain as well as total charge density distributions can be mapped quantitatively across all the functional layers constituting a LED, including n-type GaN, InGaN/GaN MQWs, and p-type GaN with sub-nm spatial resolution (~0.8 nm) by using inline electron holography. The experimentally obtained strain maps were verified by comparison with finite element method simulations and confirmed that not only InGaN QWs (2.5 nm in thickness) but also GaN QBs (10 nm in thickness) in the MQW structure are strained complementary to accommodate the lattice misfit strain. Because of this complementary strain of GaN QBs, the strain gradient and also (piezoelectric) polarization gradient across the MQW changes more steeply than expected, resulting in more polarization charge density at the MQW interfaces than the typically expected value from the spontaneous polarization mismatch alone. By quantitative and comparative analysis of the total charge density map with the polarization charge map, we can clarify what extent of the polarization charges are compensated by the electrons supplied from the n-doped GaN QBs. Comparison with the simulated energy band diagrams with various screening parameters show that only 60% of the net polarization charges are compensated by the electrons from the GaN QBs, which results in the internal field of ~2.0 MV cm-1 across each pair of GaN/InGaN of the MQW structure. In the second part of my talk, I will present in-situ observations of the polarization switching process of a planar Ni/PZT/SrRuO3 capacitor using TEM. We observed the preferential, but asymmetric, nucleation and forward growth of switched c-domains at the PZT/electrode interfaces arising from the built-in electric field beneath each interface. The subsequent sideways growth was inhibited by the depolarization field due to the imperfect charge compensation at the counter electrode and preexisting a-domain walls, leading to asymmetric switching. It was found that the preexisting a-domains split into fine a- and c-domains constituting a $90^{\circ}$ stripe domain pattern during the $180^{\circ}$ polarization switching process, revealing that these domains also actively participated in the out-of-plane polarization switching. The real-time observations uncovered the origin of the switching asymmetry and further clarified the importance of charged domain walls and the interfaces with electrodes in the ferroelectric switching processes.

• 대한치과교정학회지
• /
• 제28권3호
• /
• pp.441-452
• /
• 1998

이 연구의 목적은 말초조직에 유해 자극을 가하였을 때 중추 신경계내 이차 신경 세포체내에 발현되어 neuronal marker로 사용되고 있는 c-fos를 사용한 면역 조직화학법으로 치아이동시 동반되는 동통의 투사경로의 이해에 도움을 주고자하는 것이다. 생후 9주령의 210gm내외의 Sprague-Dawley계 웅성 백서 21마리를 교정력을 가하지않고 마취만을 시행한 정상 대조군과 교정력 적용 시간 경과에 따라 1시간, 3시간, 6시간, 12시간, 1일, 3일군으로 나누어 각 해당 시간동안 상악 우측 제1 대구치와 상악 우측 측절치사이에 Ni-Ti coil spring를 결찰하여 30gm내외의 지속적인 교정력을 가한 후 희생시켰다. 희생시킨 백서의 뇌간을 적출하여 토끼의 항체를 이용하여 면역화학 염색을 시행하였다. 삼차신경 감각핵군내 부위에 따른 c-fos 면역 반응 세포를 측정하여 교정력 적용 시간 경과에 따른 변화를 관찰하였다. $\cdot$c-fos면역 반응 세포의 배측에서의 분포는 자극측 중위핵과 미측핵의 이행부위에서 시작하여 제1경추 척수 후각에 까지 이어졌는데 가장 많은 분포를 보인 곳은 미측핵의 문측 부위였다. 그리고 주로 I층 과 II층에서 관찰되었다. $\cdot$복측에서의 c-fos면역 반응 세포의 분포는 자극측 중위핵의 미측 부위에서 시작하여 미측핵의 중간부위에 까지 이어졌다. $\cdot$교정력 적용3, 6시간군에서 c-fos면역 반응 세포가 가장 많이 관찰 되었으며 12시간군에서 감소되기 시작하여 1일, 3일군에서는 현저히 감소 하였다. 위로 미루어 볼때 지속적인 교정력에 의한 동통은 중위핵과 미측핵의 이행부위, 미측핵, 제 1경추 척수후각에서 매개되는 것으로 생각된다.

• 한국자원식물학회지
• /
• 제32권4호
• /
• pp.355-378
• /
• 2019

본 연구는 경기도 파주시에 위치한 파평산의 관속식물상 조사를 위하여 수행하였으며, 이를 토대로 고유종, 희귀 및 멸종 식물, 적색식물, 기후변화적응대상 식물, 귀화식물을 조사하였다. 2016년 4월부터2019년 6월까지 총13회에 걸쳐 현지조사를 실시한 결과 91과 257속 361종 9아종 36변종 4품종으로 총410 분류군이 확인되었다. 과별로 보면 국화과(46분류군), 벼과(31분류군), 장미과(27분류군), 콩과(18분류군) 순으로 높게 나타난다. 이 중 Chung 등이 지정한 특산식물은 9분류군, 환경부가 지정한 고유종은 6분류군이다. 희귀 및 멸종위기 식물은 IUCN 평가기준을 근거로 국립수목원이 지정한 멸종위기식물 13분류군이, 환경부가 지정한 적색자료집을 근거로 2분류군이 확인된다. 식물구계학적 특정식물은 IV등급 2분류군, III등급 13분류군, II등급 11분류군, I등급 20분류군으로 총 46분류군이다. Lee (1976)에 따른 자원식물은 식용 182분류군(44.39%), 목초용 166분류군(40.49%), 약용 138분류군(33.65%), 관상용 53분류군(12.93%), 목재용 22분류군(5.37%), 다용도 11분류군(2.68%), 섬유용 6분류군(1.46%), 산업용 1분류군(0.24%) 순이며, 산림청 지정 자원식물은 식용 293분류군(71.46%), 산업용 186분류군(45.37%), 다용도 173분류군(42.20%), 의약용 125분류군(30.48%), 유해성 식물 84분류군(20.49%), 향료 16분류군(3.9%)순이다. 기후변화 적응대상식물은 7분류군이 확인되었으며, 귀화식물은 27분류군으로 귀화율6.58%, 도시화지수 8.43%를 나타내었다. 본 파평산 일대의 조사로 본 결과는 파주 북부의 DMZ 접경 지역의 자연환경 및 자연자원의 조사 및 보존에 필요한 기초자료로 활용될 수 있을 것으로 판단된다. 한편, 증거표본을 기준으로 하여 관속식물 목록을 작성하였기 때문에 조사과정에서 누락되었을 가능성을 고려하면 파평산의 관속식물의 다양성은 더 높아질 수 있을 것이다. 이러한 조사 연구를 통해 최근 높은 빈도로 발생하는 산불의 예방, 인위적 간섭에 의한 외래식물의 침입 및 산림훼손의 방지 등을 더 정확히 파악하고, 그를 활용할 더욱 적극적이고 다양한 노력이 필요할 것이다.