• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.2
• /
• pp.109-119
• /
• 2012

Long-term wave observation was carried out near Busan New Port and the major wave characteristics were analyzed. At Busan New Port, waves from south direction were predominant throughout the year, while waves from the west, developed at the north sea of Geoje island, appeared almost the same frequency in winter season, showing apparent seasonal variation. During the observation period, the significant wave height was mostly less than 1 m, but it reached its maximum of 8.0 m when typhoon Maemi passed on September 2003. Also, the seasonal variation was hardly observed except July. In contrast, seasonal variation was apparent for the significant wave period, whose peak ranges 4~5 s in summer whereas about 3 s in winter. The largest significant wave period was 15.56 s, observed on June 2003. Meanwhile, the annual variation was negligible for mean wave direction as well as significant wave height and period. Further analysis of the wave data acquired for 5 years at 4.5 km south, in the south sea of Daejuk island, confirmed high correlation between the two observation points in summer and vice versa in winter.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.58.1-58.1
• /
• 2015

Gravitational-wave has been predicted by Einstein's general relativity in 1916, but its direct detection has failed to date despite of the persistent efforts in the last fifty years in the ground-based gravitational wave detectors. In the centennial year of the birth of general relativity, 'advanced LIGO', one of the most promising Earth-based gravitational wave detectors, plans to start commissioning for the successful discovery of gravitational waves. In addition, a pathfinder satellite of eLISA project, a space-based GW antenna by European Space Agency (ESA), will be launched in the mid of this year. In this talk, we review the current status of gravitational waves detection experiments and discuss its scientific impacts and the possibility of opening the new age of astronomy.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.3-9
• /
• 2005

In order to obtain more reliable data for the information on the ground, a new site Investigation method is proposed, in which seismic waves (S-waves) generated by the Swedish Ram Sounding Test (SRS) are used. It is indicated that the energy transferred from the hammer to the rod in SRS's is much more stable, compared to SPT's. A series of SRS with measurements of seismic waves at the ground surface were carried out to clarify the characteristics of seismic wave propagation in the ground. As the results of comparison between seismic S-wave amplitudes and $N_d$ (blow count for 20 cm penetration in SRS), it was found that amplitudes of S-waves generated by SRS correlate well with $N_d$. The amplitude of the S-wave is thought to be more adequate parameter for the soil strength and rigidity than $N_d$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.4
• /
• pp.373-379
• /
• 2009

Presented in this paper is a new experimental technique to measure material properties of lock plate of gas turbine plants by using ultrasonic guided wave. In comparison with the mechanical destructive testings, material characterization of the Inconel x-750 was nondestructively carried out in a more efficient manner to discriminate the change in elastic moduli and the poisson's ratio attributed to the variation of heat treatment condition. The proposed technique shows a satisfactory feasibility via the comparative experiments with the imported lock plate specimens. It is also expected that the guided wave technique can cover a longer and wider range as a new cost-&-time-saving inspection tool due to the interaction with a greater part of specimen, compared to a conventional local point-by-point scheme.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.515-518
• /
• 2003

A new technique is proposed for suppressing sidelobes due to the wave reflected from the waveguide end in the traveling-wave slot array. In this approach we use multiple waveguide steps intend of the conventional matched load, To show the validity of the proposed method, a Ku-band slotted waveguide is fabricated and tested. Measurements confirm the excellent sidelobe suppressing capability of the proposed method.

• Journal of information and communication convergence engineering
• /
• v.5 no.1
• /
• pp.7-11
• /
• 2007

The aim of this paper is to design and implement a new ECG signal monitoring and analysis method for the home care of elderly persons or patients, using wireless sensor network (WSN) technology. The wireless technology for home-care purpose gives new possibilities for monitoring of vital parameter with wearable biomedical sensors and will give the patient freedom to be mobile and still be under continuously monitoring. Developed platform for portable real-time analysis of ECG signals can be used as an advanced diagnosis and alarming system. The ECG features are used to detect life-threatening arrhythmias, with an emphasis on the software for analyzing the P-wave, QRS complex, and T-wave in ECG signals at server after receiving data from base station. Based on abnormal ECG activity, the server transfer diagnostic results and alarm conditions to a doctor's PDA. Doctor can diagnose the patients who have survived from arrhythmia diseases.

• Advances in nano research
• /
• v.7 no.2
• /
• pp.135-143
• /
• 2019

The important effect of porosity on the mechanical behaviors of a continua makes it necessary to account for such an effect while analyzing a structure. motivated by this fact, a new two-step porosity dependent homogenization scheme is presented in this article to investigate the wave propagation responses of functionally graded (FG) porous nanobeams. In the introduced homogenization method, which is a modified form of the power-law model, the effects of porosity distributions are considered. Based on Hamilton's principle, the Navier equations are developed using the Euler-Bernoulli beam model. Thereafter, the constitutive equations are obtained employing the nonlocal elasticity theory of Eringen. Next, the governing equations are solved in order to reach the wave frequency. Once the validity of presented methodology is proved, a set of parametric studies are adapted to put emphasis on the role of each variant on the wave dispersion behaviors of porous FG nanobeams.

• Journal of Korean Port Research
• /
• v.6 no.1
• /
• pp.69-91
• /
• 1992

A new type of horizontal submerged break water or fixed structure to control waves near coastal area is introduced to focus wave energy before or behind it. Intentionally, the water depth near the structure is changed gradually to get a refraction and diffraction effect. The concentration of wave energy due to the structure was analyzed for the selected design of structure. The shape of the submerged structure in consideration is a circular combined with elliptical curve not to cause reflection of waves at the extreme edge of the structure but cause wave scattering. The direction of the structure against the incident wave is changed easily in the model Applying a regular wave train the following were examined. 1) whether a crescent plain submerged structure designed by the wave refraction theory can concentrate wave energy at a focal zone behind and before it without wave breaking phenomenon. 2) Location of maximum wave amplification factor in terms of the incident wave direction, wave period, etc. In any event the study would contribute to control waves near coastal area and to protect a beach from erosion without interruption of ocean view it is an useful study for the concentration of wave energy efficiently with the increase of wave height.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.566-568
• /
• 2008

An E-OPMT(Electronically-controllable OPMT) was developed as an alternative of OPMT which could adjust the direction of the generated guided waves in a plate manually. The key idea of controlling the wave direction electronically is based on a few sets of axisymmetric figure-of-eight coils and the magnet which is located for making static omni-directionally biasing magnetic field over the patch. However, in order to explain wave phenomenon generated by this transducer, a new approach is required because there are various combinations between static biasing magnetic field and dynamic actuating magnetic field on the patch, not similar to OPMT. In this paper, the experiments were performed to understand characteristics of E-OPMT and the new theoretical analysis was set up for explaining the result.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.8
• /
• pp.25-31
• /
• 1999

This paper describes design and fabrication of a new bi-directional ultrasonic linear motor working by means of a traveling wave. With the finite element method, we design and verify validity of the new structure, and determine its optimal structure, material, size, and boundary conditions for proper generation of the traveling wave. Based on the results, a prototype of the motor has been fabricated and characterized, which thereby proves practical applicability of the new structure.