• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.116-128
• /
• 2020

In the shipbuilding industry, three-dimensional (3D) templates play a key role in the completeness evaluation of shell plates with a large curvature in the shell-plate fabrication process. Currently, the information of 3D templates from a ship computer-aided design system is limited; thus, manufacturers depend on their experience to produce the templates manually. This results in the inaccuracy of templates in addition to increased production time. Therefore, if the pieces of the 3D templates can be produced automatically with accurate information, the lead time of the fabrication process can be reduced. In this study, we define a new type of template piece and develop methods for extending a boundary template and converting manufacturing information into numerical control machine input. In addition, based on the results of the study, we propose a production automation system for 3D template pieces. This system is expected to reduce the lead time of the fabrication process.

• 한국항해항만학회지
• /
• 제43권6호
• /
• pp.444-449
• /
• 2019

국제항해선박과 국내항해 카페리선박에 적용되었던 "화물적재고박 등에 관한 기준"이 2018년 1월부터 국내 항만을 운송하는 일반화물선박에도 적용 되었다. 이에 따라 일반화물선을 통해 제주도를 기점으로 국내 주요항만으로 운송되고 있던 크기와 형태가 다른 비표준 철재상자와 같은 새로운 형식의 화물에 대한 법적인 성질을 분류하고 그 분류에 따라 안전하게 적재하고 고박할 수 있는 방안이 필요하게 되었다. 본 연구는 현장 조사와 관련기관 자료 수집을 통해 철재상자의 크기, 형태 등을 분석하였고, 이를 기반으로 철재상자의 법적인 지위를 관련 국내법령과 국제규범을 비교 분석하였으며 그 검토결과를 바탕으로 일반화물선의 화물창에 안전하게 적재하고 고박하는 방법을 검토하였다. 철재상자는 관련 국내법령과 국제규범 등에 따르면 비표준화 화물의 한 종류인 보호외벽이 있는 팔렛트 상자로 분류할 수 있었다. 또한, 일반선박의 화물창에 철재상자를 적재하는 경우 선박 화물창에 빈틈이 없도록 꽉채워서 적재하여 운송하는 방안이 검토되었다. 검토된 화물창내 빈틈없이 꽉채우는 적재·운송 방안이 안전한지에 대한 검증은 선체구조 안전성과 선박복원성 확보 여부를 통해 확인하였다. 선체구조 안전성에 대한 검증결과 화물창내에 적재할 수 있는 화물의 총중량에 대한 선박의 화물창 바닥과 양측면의 구조강도 값은 만족하였으며, 선박복원성은 GoM 값과 3가지 횡경사각별 복원정곡선 및 복원정이 만족되었다.

• 수산해양교육연구
• /
• 제29권3호
• /
• pp.857-868
• /
• 2017

The basic safety training for fisheries is being conducted to cope with an emergency situation and prevent the maritime accidents. A new joined person must be educated the safety training and a refresher must be completed the refresher training course every 5 year in according to the STCW-F and seafarers' Act. In order to achieve the objectives of marine safety training, it is necessary to distinguish the trainees by ship's type and the courses should be implemented in consideration of safety equipment of fishing vessels. However, since the classification criteria of seafarers' Act are unclear, the officer of fishing vessels which is over G/T 25 tons has been trained through the same course and curriculum for merchant ship's seafarers. About 80 % of domestically registered fishing vessels are small size ships(less than 100 tons) and there is not many safety equipment required by law. In case of marine accidents such as collision, the small vessel losses its buoyancy and stability caused by damage of hull. despite fisheries fall into the sea during fishing work in bad weather on the deck, there was no safety equipment by law. So fisheries must be trained by a safety training course suitable for fishing vessel. The purpose of this study is to develope the suitable course for fisheries by analysis current curriculum and rules. so suggested the basic safety training course for fisheries and institutional improvement.

• 대한조선학회논문집
• /
• 제33권4호
• /
• pp.60-65
• /
• 1996

1축 1타선에 대한 조종운동 수학모델은 통상적인 경우 이미 확립되어 널리 사용되고 있다. 또한 저속이나 천수역에서의 조종운동계산에도 응용되고, 새로운 국면의 조종운동 해석에도 기존의 조종수학 모델이 근간이 되고 있다. 한편 2축 2타선과 같은 특수선형에 대해서는 Lee 등에 의한 상세한 구속모형시험 결과로 그 특성이 알려지게 되었고, 1축 1타를 기본으로 하는 기존 수학모델에 약간의 수정을 가함으로서 충분이 조종운동을 추정할 수 있음을 보였다. 본 논문에서는 2축 2타선에 대한 Propeller Effective Wake($1-w_p$)와 유효중립타각 (Effective Neutral Rudder Angle) ${\delta}_R$에 대한 추정모델을 제안하고, Hull의 유체력에 관해서도 Inoue의 추정식을 사용하여, 초기설계단계에서 선박의 주요치수, Propeller 및 타 제원만으로서 개략적인 2축 2타선의 조종운동 계산을 가능하도록 하였다. 이 추정법에 의한 조종운동 계산결과를 엄밀한 구속모형 시험 Data에 의한 계산과 비교하여, 본 논문에서 제안된 추정법의 유용성을 검증하였다.

• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.