• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.41.2-41.2
• /
• 2010

최근 태양전지 제조비용 절감을 위해 초박형 실리콘 태양전지 개발이 활발히 이루어지고 있다. 이에 따라 후면전계(Back Surface Field, BSF) 특성에 대한 관심이 높아지는 추세이다. 이에 본 연구에서는 후면의 결정방향 및 표면구조에 따라 형성되는 후면전계(BSF)의 특성에 대해 알아보고자 하였다. 후면이 절삭손상층 식각(Saw damage etching) 후 (100)면이 드러난 실리콘 기판과 텍스쳐링(Texturing) 후 (111)면이 드러난 실리콘 기판에 후면 전극을 스크린 인쇄 후 Ramp up rate을 달리 하여 소성 공정(RTP system)을 통해 후면전계(BSF)를 형성하여 비교하였다. 후면전계(BSF)의 형상과 특성만을 평가하기 위하여 염산을 이용하여 후면 전극층을 제거하였다. 후면 전극 제거 후 주사전자현미경(Scanning Electron Microscopy)과 3차원 미세형상측정기(Non-contacting optical profiler)로 후면전계(BSF)의 형상을 비교하였다. 또한 후면전계(BSF)의 특성을 평가하고자 Quasi-Steady-State Photo Conductance(QSSPC)를 사용하여 포화전류(Saturation current, $J_0$)을 측정하였고, 면저항 측정기(4-point probe)로 면저항을 측정하여 비교하였다. 후면 전계(BSF)는 (100)면과 (111)면에서 모두 Ramp up rate이 빠를수록 향상된 특성을 보였고, (111)면에서 더 큰 차이를 보였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.199.1-199.1
• /
• 2010

Use of recycled aggregates that are constituents of concrete or asphalt-based structures has become popular because the recycling is an eco-friendly way to overcome the depletion of natural aggregates. In order to adopt the recycled aggregates for backfilling a power transmission pipeline trench, their thermal resistivity should be low enough to prevent thermal runaway in the transmission system. In this study, a series of laboratory tests with QTM-500 and KD2 Pro was performed to measure the thermal resistivity of recycled aggregates prepared from various sources. Relationships between the thermal resistivity of recycled aggregates and the water content have been obtained with consideration of compaction effort. Similar to natural soils, the thermal resistivity of the recycled aggregates decreases with increasing the water content. In addition, this study compared the experimental data with conventional prediction models for the thermal resistivity in the literature, which suggests the availability of the recycled aggregates as backfill material substituting for natural aggregates when backfilling the power transmission pipeline trench.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.132.2-132.2
• /
• 2010

기후변화협약 등으로 인하여 기존 화력발전기술보다 효율이 높고 온실가스 발생을 줄일 수 있는 고효율 청정석탄 이용기술에 대한 사회적 요구가 높아짐에 따라 석탄 가스화와 관련된 기술 개발이 확대되고 있다. 석탄을 가스화하면 CO와 $H_2$가 주성분으로 구성된 합성가스를 얻을 수 있는데, 이를 청정가스연료로 사용하기 위해서는 합성가스에 포함된 분진의 제거가 필수적이다. 대부분의 석탄가스화 공정에서는 캔들형 필터를 사용한 여과식 집진시스템을 적용하여 합성가스에 포함된 분진을 제거하고 있다. 본 연구에서도 Pilot급 석탄 가스화기에서 제조된 합성가스에 포함된 분진 제거를 위하여 고온/고압 집진시스템을 구축하였으며, 다양한 운전조건과 필터 종류에 따른 집진시스템의 운전특성 파악을 수행하였다. 연구결과 석탄 합성가스를 안정적으로 정제 하기위한 집진시스템의 중요한 운전 기준과 방법을 도출할 수 있었으며, 이렇게 도출된 운전 기준과 방법은 용량이 증대된 집진시스템의 연속운전을 진행하여 향후 실증할 예정이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.133.2-133.2
• /
• 2010

Fischer-Tropsch synthesis (FTS) was carried out in heat-exchanger typed reactor with cobalt metallic foam catalyst. Considering the heat and mass transfer limitations in the cobalt catalyst, a Co-foam catalyst with an inner metallic foam frame and an outer cobalt catalyst was developed. The Co-foam catalyst was highly selective toward liquid hydrocarbon production and the liquid hydrocarbon productivity at $203^{\circ}C$ reached to $52.5ml/(kg_{cat}{\cdot}h)$, which was higher than that obtained by the Co-pellet. Furthermore, the heat-exchanger typed reactor was developed to efficiently control the highly exothermic reaction heat. The reaction heat generated in the FTS reaction on the cobalt active site was easily transferred to reactor wall by the metallic foam in the catalyst and the transferred reaction heat was directly removed by the hot oil which circulated the wall side of the heat-exchanger typed reactor.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.89.2-89.2
• /
• 2010

고체산화물 연료전지는 $800{\sim}1000^{\circ}C$인 고온에서 작동하므로 적용되는 밀봉재의 요구조건은 매우 중요하다. 본 연구에서는 SOFC 밀봉재로서 $SiO_2-B_2O_3-RO$계 결정화 유리를 선정하였으며 작동온도 부근에서 결정화를 유도하여 고온점성유동을 제어하고자 하였다. 따라서 $SiO_2-B_2O_3-RO$계에 RO인 CaO, SrO, BaO, MgO를 상호 치환하였을 때 결정상의 생성, 생성온도, 생성결정의 종류가 sealing 특성에 어떠한 영향을 주는가를 검토하였다. 결정화유리를 $800^{\circ}C$로 유지하였을 때 생성되는 주 결정상은 Calsium silicate, Strontium silicate, Barium silicate, Magnesium silicate이였으며 Strontium silicate 의 생성속도가 가장 빨랐으며 결정상은 불산으로 에칭하여 SEM으로 관찰하였다. Barium silicate를 유도한 결정화 유리가 $800^{\circ}C$에서 1000시간 유지하였을 경우 가장 내화학성이 우수하며 강도값도 154MPa로 가장 높았다. 또한 부분 결정화를 통해 $800^{\circ}C$ 점성유동이 제어됨을 고온현미경을 통해 관찰하였다.

• The KSFM Journal of Fluid Machinery
• /
• 제18권4호
• /
• pp.36-42
• /
• 2015

This is a study about one of the most widely used hydro machinery all over the world - pump-turbine. The system has an impeller which pumps water to an upper reservoir during the night and the same impeller acts as a runner for turbine mode during the day for providing stable electrical power to the grid. The internal flow analysis is investigated in this study to help understand how the water passes through the passage of the vanes and blades, providing the designer with useful information on the behavior of recirculation flows which could reduce the efficiency of the pump-turbine. The 100 kW pump-turbine model has H = 32 m, $Q=0.336m^3/s$ and $N=1200min^{-1}$. For this study there are 7 blades, 19 stay vanes and 20 guide vanes. From this study, it was observed that this pump-turbine design showed very good internal flow characteristics with no flow separation and no recirculation flows in normal operation mode.

• The KSFM Journal of Fluid Machinery
• /
• 제18권4호
• /
• pp.49-55
• /
• 2015

The pumped storage plant operates with quick change of the discharge as well as quick changes between pump mode and turbine mode. This study focuses on the cavitation analysis of a pump-turbine model because in turbo-machinery, cavitation can reduce the performance and shorten service life. The pump-turbine model system consists of 7 blades, 20 stay vanes (including tongue) and 20 guide vanes. This study adopts the Rayleigh-Plesset model as a cavitation model, which illustrates cavitation by using the air volume fraction method. The pump mode and turbine mode at the operating condition of partial loading, normal and excessive loading are analyzed to investigate the cavitation performance of the pump-turbine. It was observed that this pump-turbine design showed very good cavitation characteristics with no cavitation bubbles in all operating conditions. Overall value of air volume fraction of both mode at different operating condition are lower than 1, which confirms low possibility of cavitation occurrence at current situation.

• Journal of Korean Association for Spatial Structures
• /
• 제14권4호
• /
• pp.47-54
• /
• 2014

This paper presents the structural model development and verification processes of wind turbine blade. The National Renewable Energy Laboratory (NREL) Phase VI wind turbine which the wind tunnel and structural test data has publicly available is used for the study. The wind turbine assembled by blades, rotor, nacelle and tower. The wind blade connected to rotor. To make the whole turbine structural model, the mass and stiffness properties of all parts should be clear and given. However the wind blade, hub, nacelle, rotor and power generating machinery parts have difficulties to define the material properties because of the composite and assembling nature of that. Nowadays to increase the power generating coefficient and cost efficiency, the highly accurate aerodynamic loading evaluating technique should be developed. The Fluid-Structure Interaction (FSI) is the emerging new way to evaluate the aerodynamic force on the rotating wind blade. To perform the FSI analysis, the fluid and structural model which are sharing the associated interface topology have to be provided. In this paper, the structural model of blade development and verifying processes have been explained for Part1. In following Part2 paper, the processes of whole turbine system will be discussing.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제13권3호
• /
• pp.633-642
• /
• 2018

Solar power plants are rapidly spreading, and various design, development, construction and maintenance related technologies and corporations coexist. In addition to private real estate development, they are also profitable in various forms such as building facilities, land, And continues to operate. In this paper, however, we have reviewed and studied the economic feasibility of photovoltaic power generation system based on the investment of off - the - shelter and mall investment, which is a generalized form of real estate asset management.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.310-313
• /
• 2005

The conical fluidizing system of a binary mixture of Geldart C powders and Geldart A particles was defined as the conical powder-particle fluidized bed. We used a cold conical powder-particle fluidized bed model having a 0.104m-I.D. and 0.6m-high with an apex angle of $10^{\circ}$ for fluidization of a binary powder-particle mixture of 50 $vol\%$ fine carbon black powders (HI-900L, Korea Carbon Black Co.) and coarse alumina particles $(90{\mu}m)$ under different superficial gas velocities (0-0.1 m/s). The differential bed pressure drop increases with increasing gas velocity, and it goes from zero to a maximum value with increasing or decreasing gas velocity. In the conical fluidized beds of fine powders, demarcation velocities of the partial fluidization, full fluidization, partial defluidization was not observed.