• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.180-186
• /
• 2000

This paper presents a new winding method in the electronic descaling(ED) technology. The ED technology Produces an oscillating electric field via the Faraday's law to Provide necessary molecular agitation to dissolved mineral ions. But present method gives another agitation force to mineral ions, which is Lorentz's force. Experiments were peformed at various Renolds number. A series of tests was conducted, measuring pressure drop across test section and the overall heat transfer coefficient as a function of time. In order to accelerate the rate of fouling, artificial hard water of 1000ppm $CaCO_3$ was used throughout the tests. The results show that the new method accelerates collision of mineral ions and improvs efficiency of system.

• New & Renewable Energy
• /
• v.17 no.3
• /
• pp.32-41
• /
• 2021

A groundwater source heat pump (GWHP) was developed in this study by adapting a borehole heat exchanger with closed-loop and open-loop systems in a new building. In the pilot test building, the air-conditioning on the second floor was designed to employ a closed-loop system and that on the third floor had an open-loop system. The GWHP design is based on the feasibility of groundwater resources at the installation site. For the hydrogeological survey of the study site, pumping and injection tests were conducted, and the feasibility of GWHP installation was evaluated based on the air-conditioning load demand of the building. The site was found to be satisfactory for the design capacity of the thermal load and water quality. In addition, the effect of groundwater movement on the performance of the closed-loop system was tested under three different operational scenarios of groundwater pumping. The performance of the system was sustainable with groundwater flow but declined without appropriate groundwater flow. From long-term observations of the operation, the aquifer temperature change was less than 2℃ at the observation well and 5℃ at the injection well with respect to the initial groundwater temperature. This pilot study is expected to be of guidance for developing GWHPs at fractured rock aquifers.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.4
• /
• pp.291-296
• /
• 2014

For the purpose of energy consumption and green-house gas reduction from building, new insulation materials with improved thermal property have been developed and used. Among new insulation materials, mineral hydrate which compensates for the defects of existing materials is using as a prominent insulation material. The fabrication method of mineral hydrate is similar to that of ALC for building structure but mineral hydrate is only used for insulation. The raw materials that make up of mineral hydrate are cement, lime and anhydrite. Especially anhydrite is all dependant on imports. In this study, Desulfurization Gypsum(DG), by-product of oil plant, was used for replacing for imported anhydrite and waste recycling. DG substituted all of anhydrite and a part of lime. Mineral hydrate used DG had analogous thermal and physical properties, compared to existing mineral hydrate.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.353-358
• /
• 2009

The ability of natural abrasives which were recovered from CRT glass polishing process was evaluated. Comparing the center line average roughness values of a glass polished with new pumice (Ra = $0.039{\mu}m$) and with new garnet (Ra = $0.031{\mu}m$), the glass surface polished with the recycled pumice and the garnet had less pits on the surface with smaller Ra values (Ra = $0.025{\mu}m$ for recycled pumice and Ra = 0.029 for recycled garnet). Recycled rouge contains amorphous glass fragments so that it should be used as a cement replacement rather than recycle into an abrasive. Nnatural abrasives, pumice and garnet powder, which are used in CRT glass polishing process can be recycled into abrasives so that it can help to minimize costs and environmental impact from the production of abrasives and the disposal of waste sludge.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.19-19
• /
• 2003

Cineam gold deposit is one of an epithermal gold deposit of Low Sulfidation type, which is located in the Sunda-Banda magmatic Arc Zone. Its existence in this region has led to a new concept or few point on the Sunda - Banda Magmatic Arc. Even the deposit is classified as a small scale in mine, however, mineralogically, fluid inclusion and isotopes studies are very interesting to be studied. (omitted)

• Geophysics and Geophysical Exploration
• /
• v.19 no.4
• /
• pp.179-186
• /
• 2016

Data leveling utilizing baseline survey makes existing old data be smoothly compiled, and also keep characteristics of data, such as small high frequency anomaly information. The previously proposed leveling method may easily loose or damage the original characteristics of the data. This paper suggests a new leveling method. New method determines the leveling coefficients using regional field of the original data, which is composed by data on the grids point coincided with baseline survey grid, while existing method uses all grid data without any considerations. Results of new leveling method on test area shows that new method make two data sets compiled more smoothly and trends of data distribution expressed more clearly. And then, it also preserves high frequency information well.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.325-330
• /
• 2001

Shizhuyuan W-Mo-Bi-Ca $F_2$polymetallic ore is classified to the refractory one due to its complex property, fine dissemination and close association of minerals. Through several years of researches, in line with GY new mineral processing technology developed by Guangzhou Research Institute of Nonferrous Metals, in sulfide flotation circuit, an iso-flotability flowsheet is used to replace original overall bulk flotation flowsheet, and in tungsten flotation circuit, a new chelating type-GY reagent and a special pulp-conditioning system and a new technology of wolframite slime flotation are used to replace the traditional "Caustic Soda Method"$_{［1］}$, the metallurgical performance is greatly improved. Besides, GY New Method has created a favorable condition for comprehensive recovery of fluoride from tungsten flotation tailings. Notable economic benefit has been achieved.d.

• Economic and Environmental Geology
• /
• v.47 no.2
• /
• pp.169-180
• /
• 2014

Surface geological and trench surveys and drilling exploration (total length, 1,100 m; 9 drill holes) were carried out to secure new Au ore bodies in the area($0.96km^2$) of Actosity gold field, where is located at the western Kuldjuktau mineralized district in the middle territory of Uzbekistan. Several Au ore bodies occurring as tabular or lens shapes with thickness of 0.5~35 m were newly discovered on the outcrops and extended to $N40{\sim}70^{\circ}\;W$ direction with dipping of $70{\sim}90^{\circ}$ SW or NE. Indicated ore resource of gold with Au grade of 0.25~3.52 mg/kg was newly estimated by 2,382 t(gold resource of 2.5 t) as a result of 9 drilling exploration in 2010~2012 from the Actosity gold field. Judging from the ore resources and Au grade of the Actosity gold field, economic potentiality of mining development seems to be low. Because of high possibility to secure new ore resources through more detailed exploration works from the Actosity area, the growth of econonic value will be expected by a mine of middle scale.

• Journal of Periodontal and Implant Science
• /
• v.37 no.1
• /
• pp.77-89
• /
• 2007

This study was performed to evaluate the effect of deproteinized bovine bone mineral soaked in inorganic polyphosphate on bone regeneration in the calvaria of rabbit in the procedure of guided bone regeneration with titanium reinforced expanded polytetrafluoroethylene(TR-ePTFE) membrane. The rabbits were divided into four groups. Control group used TR-ePTFE membrane filled with de-proteinized bovine bone mineral, experimental group I used TR-ePTFE membrane and deproteinized bovine bone mineral soaked in 4% inorganic polyphosphate, experimental group II and III used TR-ePTFE membrane and deproteinized bovine bone mineral soaked in 8% or 16% inorganic poly-phosphate respectively. After decortication in the calvaria, GBR procedure was performed on 8 rabbits with only TR-ePTFE membrane or titanium reinforced ePTFE membrane filled with deproteinized bovine bone mineral soaked in inorganic polyphosphate. The animals were sacrificed at 4 weeks, and 8 weeks af-ter the surgery. Non-decalcified specimens were processed for histologic analysis, and new bone for-mation was assessed by histomorphometric as well as statical analysis. 1. Both control group and experirrental group dermnstrated increasing of new bone formation until 8weeks. 2. At 8 weeks, experimental group I and group II showed the significant difference compared to control group in new bone formation. Especially experimental group II showed the most in-creasing of new bone formation. 3. The higher concentration of inorganic polyphosphate filled, the more volume of bone formation pro-moted, but experimental group III did not reveal significant difference compared to contol group. 4. Deproteinized bovine bone mineral did not resorbed at all until 8 weeks. These results suggest that inorganic polyphosphate has a promoting effect on bone regeneration. possibly by enhancing osteoconductivity of the carrier and by increasing osteoinductivity of the defected alveolar bone tissue, but not as we respect.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.1
• /
• pp.74-81
• /
• 2005

The heat treatment of serpentines for mineral carbonation was studied systematically. Crystallographic, spectroscopic and thermochemical properties were investigated for serpentines before and after heat treatment. Drastic weight loss due to the removal of hydroxy groupe(-OH) occupied in serpentine crystalline was revealed after heat treatment. In XPS results, MgO was founded at heat treated serpentine powders while Mg(OH) was observed at untreated serpentine powders. Metallic oxides originated from serpentine ingredients were regenerated by heat treatment.