• Journal of the Korean Professional Engineers Association
• /
• v.35 no.4
• /
• pp.52-55
• /
• 2002

The development of environment-friendly Energy Resources (New Renewable Energy Resources) is one of the global topics these days, considering CO2 Reduction Agreement by Kyoto Protect and the limit of Conventional Energy Resources in near future. Among the New Renewable Energy, Wind Energy is the most feasible Renewable Energy in view of economical and technical aspect at this moment. Last 10 years the Wind Energy Development was really dramatical in Europe. especially in Germany, Denmark and Spain. In this circumstance World Wind Energy Conference was held in Berlin Germany, in order to review the present status and future development of the Wind Energy. This report is a brief report of the Conference .

• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.2
• /
• pp.144-156
• /
• 2012

In recent years, advanced countries in energy sector are emphasizing the importance of the development and deployment of renewable energy to cope with the global environmental crisis such as depletion of fossil energy, climate convention to control emissions of greenhouse gases. In this paper, we evaluate the economic value of the investment in new and renewable energy R&D in Korea and optimal deployment timing of new and renewable energy by using the real option approach. The real option model adopted in this paper assumes that a decision maker has a compound option to abandon, deployment, or continue the R&D. As a result by using empirical data of Korea, it is found that there exists a considerable amount of positive real option value (ROV) in the investment of new and renewable energy R&D while its net present value (NPV) calculated by traditional discounted cash flow (DCF) model shows negative value.

• New & Renewable Energy
• /
• v.9 no.1
• /
• pp.12-16
• /
• 2013

The nacelle anemometer mounted behind the blade roots of a wind turbine measures distorted wind speed comparable with free-stream wind because of the wake effects caused dependent upon the operation of the wind turbine and the rotation of its blades. The field campaign was carried out to measure free-stream wind speed at a height identical to the height of the nacelle anemometer by deploying a ground-based remote-sensing equipment, LIDAR. It is derived that a third-order polynomial equation for correcting wind speed measured by the nacelle anemometer to undistorted free-stream wind speed incident to a wind turbine. It is anticipated that the derived correction equation enables wind speed measured by the nacelle anemometer to be used as a precise input for a wind turbine performance test and for developing an active control logic.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4049-4061
• /
• 2022

TRISO-coated particle fuel is widely used in high temperature gas cooled reactors and other advanced reactors. The performance of coated fuel particle is one of the fundamental bases of reactor safety. The failure probability of coated fuel particle should be evaluated and determined through suitable fuel performance models and methods during normal and accident condition. In order to better facilitate the design of coated particle fuel, a new TRISO fuel performance code named FRAT (Fission product Release Analysis Tool) was developed. FRAT is designed to calculate internal gas pressure, mechanical stress and failure probability of a coated fuel particle. In this paper, FRAT was introduced and benchmarked against IAEA CRP-6 benchmark cases for coated particle failure analysis. FRAT's results agree well with benchmark values, showing the correctness and satisfactory applicability. This work helps to provide a foundation for the credible application of FRAT.

• New & Renewable Energy
• /
• v.1 no.1 s.1
• /
• pp.15-23
• /
• 2005

• Proceedings of the SAREK Conference
• /
• 2005.06a
• /
• pp.60-60
• /
• 2005

• Environmental and Resource Economics Review
• /
• v.19 no.4
• /
• pp.805-828
• /
• 2010

Korea also plans to introduce Renewable Portfolio Standard (RPS) for strengthening market functions after 2012 as United States and several members of EU countries did. Through the introduction of RPS, it requires energy industry to supply new and renewable energy at fixed rate. Therefore, it will contribute to the distribution of new and renewable energy. This paper analyzed the economic effect of the introduction of RPS using CGE. The summary of the paper on the analysis of the economic effect based on endogenous growth theory under imperfect market competition by using CGE is as follows; Since RPS possibly regulates the amount of new and renewable energy, it can achieve the target amount of new and renewable energy without fail. As achieving the target amount accurately, the distribution of more advanced skills can be expected. However, GDP reduction can occur because investment cost increases due to the requirement of new and renewable energy supply. Therefore, in the long run, it is appropriate to introduce RPS because it contributes to the distribution of new and renewable energy and can be utilized as a new growth engine to encourage economic growth.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.3095-3105
• /
• 2022

Solid Microencapsulated Fuel (SMF) is a type of solid fuel rod design that disperses TRISO coated fuel particles directly into a kind of matrix. SMF is expected to provide improved performance because of the elimination of cladding tube and associated failure mechanisms. This study focused on the neutronics and some of the fuel cycle characteristics of SMF by using OpenMC. Two kinds of SMFs have been designed and evaluated - fuel particles dispersed into a silicon carbide matrix and fuel particles dispersed into a zirconium matrix. A 7×7 fuel assembly with increased rod diameter transformed from the standard NHR200-II 9×9 array was also introduced to increase the heavy metal inventory. A preliminary study of two kinds of burnable poisons (Erbia & Gadolinia) in two forms (BISO and QUADRISO particles) was also included. This study found that SMF requires about 12% enriched UN TRISO particles to match the cycle length of standard fuel when loaded in NHR200-II, which is about 7% for SMF with increased rod diameter. Feedback coefficients are less negative through the life of SMF than the reference. And it is estimated that the average center temperature of fuel kernel at fuel rod centerline is about 60 K below that of reference in this paper.

• Current Photovoltaic Research
• /
• v.11 no.2
• /
• pp.44-48
• /
• 2023

In heterojunction technology (HJT) solar cells, low-temperature curing paste is used because the passivation layer deteriorates at high temperatures of 200℃ or higher. However, manufacturing HJT photovoltaic (PV) modules is challenging due to the weak peel strength between busbar electrodes and cells after soldering process. For this issue, the electrode thicknesses of the busbars of the HJT solar cell were analyzed, and the peel strengths between electrodes and wires were measured after soldering using an infrared (IR) lamp. As a result, the electrodes printed by the screen printing method had a difference in thickness due to screen mask. Also, as the thickness of the electrode increased, the peel strength of the wire increased.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.6
• /
• pp.27-36
• /
• 2018

Typical Meteorological Year Dataset is necessary for the renewable energy feasibility study. Since National Renewable Energy Laboratory has been built Typical Meteorological Year Dataset in 1978, gridded datasets taken from numerical weather prediction or satellite imagery are employed to produce Typical Meteorological Year Dataset. In general, Typical Meteorological Year Dataset is generated by using long-term in-situ observations. However, solar insolation is not usually measured at synoptic observing stations and therefore it is limited to build the Typical Meteorological Year Dataset with only in-situ observation. This study attempts to build the Typical Meteorological Year Dataset with satellite derived solar insolation as an alternative and then we evaluate the Typical Meteorological Year Dataset made by using satellite derived solar irradiance at Daejeon ground station. The solar irradiance is underestimated when satellite imagery is employed.