Proceedings of the Korea Contents Association Conference
/
2008.05a
/
pp.892-896
/
2008
In construction work's process of a basic planning, we must carry out a topographical for construction reserved land and to the basis of this, production of profile is Indispensable factor for the purpose of every construction work such as road, rail way, canal and etc. From this research, the production of profile about construction reserved land, using topography information of numerical value topographical map produced by NGIS construction project, construct precision 3D topography model and from this, propose plans for utilizing by producing automatic profile. With the aim of this, abstract every layers of main facilities and altitude from numerical value topographical map and while producing 3D topography model by using this, we produce and product automatic profile from construct precision 3D topography. And about the produced profile's process, a topographical by mutual analysis was carried out to check whether the automatic produced profile's accuracy could be accepted at actual estimation and permissible accuracy. It is considered that the result of the research could be suggested as a new formation techniques concept which can reduce the designing time and expenses and increase the efficiency of planning in the basic design process for the construction.
Transactions of the Korean Society of Automotive Engineers
/
v.13
no.4
/
pp.74-80
/
2005
This paper presents a misfire monitoring method by using the weight factor. According to OBD II(On-Board Diagnostics) regulations of the CARB (California Air Resources Board), an ECU (Electronic Control Unit) should detect misfires which occur in the internal combustion engine. A misfire is 1311owe4 by post-oscillations for short duration. Sometimes, the amplitude of oscillations may be as high as misfire and can be falsely detected as another misfire. To prevent this, the software designers do not attempt to detect another misfire for this short duration, during which the post oscillations exist. Because of this, ECU does not detect all the misfires and hence, the unstable state of automobile cannot be detected. If this happens for a long time, automobile may get damaged. To solve these problems, this paper suggests a new algorithm to detect misfire by using weighting factor Weighting factor is a concept to distinguish the misfire with the post oscillation and to improve the detection rate. This value of weighting factor is used for counting the misfire. This paper also shows the result of experiment done on a automobile using this software. The software is implemented using ASCET-SD which is preferred in the design of engine control. This paper's result show the possibility of improving the misfire detection by implementing this algorithm.
Choo, Tai Ho;Son, Hee Sam;Yun, Gwan Seon;Noh, Hyun Seok;Ko, Hyun Soo
Journal of the Korea Academia-Industrial cooperation Society
/
v.16
no.2
/
pp.1533-1540
/
2015
In order to demonstrate the flow properties of the river bed and the design of hydraulic structures, the estimation of friction velocity is essentially required. However, existing friction velocity equations such as Log method and Power law have trouble to estimate the friction velocity because a boundary condition and various hydraulic properties are changed constantly in near the wall. In the present study, therefore, a new friction velocity equation that can minimize the parameters and reduce an error was suggested. To verify accuracy and reliability for the proposed equation, Clauser method, $\sqrt{gRI}$ method, reynolds stress method by Dr. Song were compared with the proposed method by estimated entropy parameter M for each channel. Consequently, the results show that uniform flow condition as well as non-uniform flow condition with highly accuracy nearly matched in case of accelerating non-uniform condition of $R^2=0.9621$, Decelerating Non Uniform condition of $R^2=0.9274$, Uniform condition of $R^2=0.8865$.
To analyze the aerosol dynamics in severe accidents of LMFBR, a new computer code entitled MCAD (Multicomponent Aerosol Dynamics) has been developed. The code can treat two component aerosol system using relative collision probability of each particles as sequences of accident scenarios. Coagulation and removal mechanisms incorporating Brownian diffusion and gravitational sedimentation are included in this model. In order to see the effect of particle geometry, the code makes use of the concept of density correction factor and shape factors. The code is verified using the experimental result of NSPP-300 series and compared to other code. At present, it fits the result of experiment well and agrees to the existing code. The input variables included are very uncertain. Hence, it requires uncertainty and sensitivity analysis as a supplement to code development. In this analysis, 14 variables are selected to analyze. The input variables are compounded by experimental design method and Latin hypercube sampling. Their results are applied to Response surface method to see the degree of regression. The stepwise regression method gives an insight to which variables are significant as time elapse and their reasonable ranges. Using Monte Carlo Method to the regression model of LHS, the confidence level of the results of MCAD and their variables is improved.
A reading aloud performance is an activity in which the actors convey the meaning of the play to the audience through reading the play without memorizing the play. Although this term has been used for a long time, it can be said in the early 2000s that Korea began to pay attention to reading aloud performance in the cultural world. As the theater education is strengthened in the 2015 revision curriculum, interest in this "reading aloud performance" is also growing. In this article, we analyzed the reading aloud performance of the 8th contemporary Japanese drama '2018' in order to utilize the reading aloud performance in the educational field and to utilize it in the lecture of the children education. There are two types of rehearsals for the actors on stage: 'Reading by watching drama', 'Playing by memorizing drama', and 'Mixing two types'. In the end, the key is that there is no set rule for the type of reading aloud performance. It's not trouble to see or not to see the play. It is not necessary to have a stereotype that you should do a proper reading aloud performance in consideration of your situation, but that you should do this. If children understand the concept of read aloud performance in a flexible way, the educational effect will be greater. Based on this analysis, we suggested 'not sticking to the form of reading aloud performance' and 'choosing various types of reading aloud performance' as a criterion for applying to the education field for children. In addition, the sub-criteria required for selecting 'various types of lecture performances' include' selecting a specific scene in the content of the play ',' considering the level or situation of the student ',' not hesitating to make a new type of lecture performance '. I hope that this article will be a stepping stone to revitalize the discussion in the educational world where discussion on the performance of reading aloud is requested, and to solve the problem of lack of educational design due to lack of theory.
Journal of the Korean Society for information Management
/
v.36
no.1
/
pp.31-52
/
2019
The purpose of this study is to apply the Servicescape, which is used to measure the spatial services in marketing, to the studies on university libraries, in order to identify the influence of the library spaces and facilities on the satisfaction and continuance intention of the users of university libraries. For this purpose, questionnaires and in-depth interviews were conducted for users in ten private universities located in Seoul. Servicescape factors of the libraries showed that cleanliness, comfort, aesthetics, and convenience had a significant influence. Of these, convenience turned out to have the highest level of influence upon satisfaction, followed by cleanliness, aesthetics, and comfort. Descriptive statistical analysis showed whether there were significant differences in satisfaction and continuance intention based on the differences in the characteristics of the samples. Findings show that it would be necessary to provide spaces that can accommodate the various functions of a university library; seek advancement of the services; and develop the spaces of a library in consideration of cleanliness, comfort, aesthetic, and convenience. This study introduced the concept of Servicescape for the first time in the field of library and information science. This study implies that the results assist a more detailed analysis for the Library as Place dimension of LibQUAL+, and provide a new guideline for practitioners who design library spaces.
Journal of the Korea Academia-Industrial cooperation Society
/
v.19
no.12
/
pp.272-278
/
2018
Traffic volume has been greatly increasing due to urban development and the improvement of living standards, and many complaints are being raised due to the increasing road noise. As a countermeasure against these problems, highly soundproof walls are installed on the sides of roads. However, the ability to bear wind loads is a major design requirement for soundproof walls, which contributes to the exponential increases in construction costs and restricts the height of the walls. The aim of this study is to improve the performance of soundproof walls and to dramatically reduce wind loads while maintaining excellent price competitiveness. Based on Helmholz's resonator theory, a new concept is proposed for a ventilation-type soundproofing plate that can pass through a fluid like air and reduce noise. A full-scale metal soundproofing plate was produced to satisfy the quality standards of highways by conducting a sound-pressure transmission-loss test, wind tunnel test, and material quality test. To verify the reliability, the wall was manufactured and installed, and the sound insulation effect was examined by measuring the noise over time. In the future, ventilated soundproof walls on roads could create a pleasant living environment due to the high noise-insulation effect.
In this paper, the discussion on Yin and Yang and the Five Elements in Mohism is examined through the comparison with Hundred Schools of Thought. The ideas of School of Naturalists including Zou Yan or those of the Five Elements were fundamentally for the purpose of observing the regularity of changing dynasty. However, this perspective had not been emphasized as a subject of Contention of a Hundred Schools of Thought until the end of the Era of Warring States. Even though it is true that Hundred Schools of Thought applied the theory of Yin and Yang and the Five Elements in common based on the understanding of the idea, but it failed to be connected to each ideological system. The fundamental reason for this can be found in the difference between the awareness of a reality and the concept of history in Hundred Schools of Thought. Where were the characteristics and reasonable opinions of the theory of Yin and Yang and the Five Elements in Mohism from? The most important feature of Mohism is to form independent, collective, cooperative groups based on the people of lower classes at that time and to consider God an ideological presumption. Therefore, in reality, it concentrated only on sociopolitical stability and maintenance of their own labor activities, and it was difficult for them to focus on an objective regularity of a national system or change of dynasty. In addition, due to the characteristics of individual groups, it was hard to have a macroscopic viewpoint not only on a national system, but also on others as in Zou Yan's Dae-gu-ju-seol(大九州說). With respect to this, at least, Xunzi, before the unification, gives a valid criticism. In the end, the effort to design a new political system and to secure ideological legitimacy on the assumption of the unification of the nations of the Warring States period became more specific through the edition of $L{\ddot{u}}shi$ Chunqiu (呂氏春秋), so-called Mixed School(雜家) or Synthesized School(綜合家).
Purpose: In the restaurant sector, it has been known that consumers' positive perception of brands influences their positive WOM intention, and information sources play an important role in increasing credibility by enhancing consumer awareness and developing differentiated brands. This study examines the effects of information sources (e.g., advertisement, WOM, SNS) on trust (cognitive and affective) and, WOM and eWOM intention in the restaurant context. In the model, cognitive and affective trust play mediating roles in the relationships between information sources (e.g., advertisement, WOM, SNS) WOM and eWOM intention. Research design, data, and methodology: Research models and hypotheses were developed according to the research direction. The survey questionnaire items were developed and used appropriately according to the contents of this paper based on prior studies. All constructs were measured with multiple items developed and validated in prior studies. A total of 502 responses were collected from an online survey. The research model was evaluated using SmartPLS 4.0. Frequency analysis was performed to understand the demographic characteristics of the survey respondents. The reliability, convergent validity, and discriminant validity were assessed using measurement model analysis. The proposed model was verified using the structural equation model. Results: Advertisement, WOM, and SNS information sources all had a positive effect on affective trust, whereas only WOM had a significant effect on cognitive trust. In addition, affective trust had a positive effect on cognitive trust and eWOM intention but did not affect WOM intention. Finally, cognitive trust was found to have a positive effect on both WOM intention and eWOM intention. Conclusions: This study redefines the concept of where restaurant service companies should focus when providing consumers with information about their products and services. As a result, the conceptual framework of positive word of mouth intention to increase new customer visits to the restaurant brand has been expanded. In addition, this study not only presents an information source management strategy for restaurant brands, but also presents practical implications for resource allocation guidelines for customer management in the restaurant sector.
With the development of virtual and augmented reality technologies, the metaverse, a digital world that provides an immersive feeling like the real world, is overgrowing. Many IT companies such as Naver, Facebook (Meta), and NVIDIA are developing innovative technologies and launching the Metaverse platform and related products on the market. However, even though it is a new business in which many global big tech companies are aggressively investing, the results are not yet precise compared to the market expectations, and the rate of increase in the number of users is gradually slowing down. This can be attributed to the lack of consideration and understanding about how to grow the metaverse ecosystem and operate & harmonize various users/components from the time the metaverse platform was designed. In order to propose a better solution to these problems, this study adopts the yin-yang and five elements theory, which was created to understand the operation logic and logic of the human world for thousands of years. This research would like to propose a theory of double lines-five elements by defining two essential spaces of the metaverse platform, online and offline, and five essential elements constituting the metaverse platform. This study intends to provide a theoretical lens on how to design and operate a platform through the double lines and five elements theory and the concept of coexistence and polarity between the five elements.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.