• Journal of Power Electronics
• /
• v.11 no.1
• /
• pp.10-15
• /
• 2011

In this paper, a new soft switching three phase inverter with a quasi-resonant dc-link is presented. The proposed inverter has a dc-link switch and an auxiliary switch. The inverter switches are turned on and off under zero voltage switching condition and all auxiliary circuit switches and diodes are also soft switched. The control utilizes PWM and the auxiliary switch does not require an isolated gate drive circuit. In this paper, the operation analysis and design considerations of the proposed soft switching inverter are discussed. The presented experimental results of a realized prototype confirm the theoretical analysis.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.397-408
• /
• 1994

In this paper, a novel concept for a static three-phase to three-phase power converter for an AC drive with a unity power factor and reduced harmonics on the utility line is presented. The power circuit consists of two back-to-back connected six-pulse bridges having only a $\mu$F ceramic capacitor in the DC link. By controlling the active kpower balance between two bridges, the DC link voltage can be maintained within 20V deviation from the nominal value with the small ceramic capacitors regardless of the load variation even in the unbalanced source condition.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3236-3238
• /
• 1999

This paper proposes a new face recognition technique in the dynamic link architecture which shows robustness against size variation and distortion. The face recognition technique in the dynamic link architecture so far was not appropriate for the recognition of various size of faces because of the fixed size of the graph and the fixed value of a of the Gabor filter not considering the size of the face. The proposed face recognition algorithm can represent the input facial image by a suitable size of labeled graph, and it can also adjust the dilation width and the height of the vibrating amplitude of the Gabor filter, thus face recognition in the dynamic link architecture is even applicable regardless of the size of the face.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.4
• /
• pp.306-314
• /
• 2000

In this paper we present a new approach to estimate link travel speed based on the hybrid neuro-fuzzy network. It combines the fuzzy ART algorithm for structure learning and the backpropagation algorithm for parameter adaptation. At first, the fuzzy ART algorithm partitions the input/output space using the training data set in order to construct initial neuro-fuzzy inference network. After the initial network topology is completed, a backpropagation learning scheme is applied to optimize parameters of fuzzy membership functions. An initial neuro-fuzzy network can be applicable to any other link where the probe car data are available. This can be realized by the network adaptation and add/modify module. In the network adaptation module, a CBR(Case-Based Reasoning) approach is used. Various experiments show that proposed methodology has better performance for estimating link travel speed comparing to the existing method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.30.1-30
• /
• 2001

This paper describes a new cooperative strategy for two wheelchairs to climb a step. These two wheelchairrobots are connected with a simple linkage mechanism between the rear of one wheelchair and the front of another. Two wheelchair robots climb a step one after the other. In this research, We did not use a method by Which a robot lifts up and supports its weight using any special actuator but a method of handling the robot's moment of rotation by the force of the link which come from the assisting robot. This method is especially influenced by the height of the two robot's link positions. So we study this method from the viewpoint of changing the two-link positions....

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.288-291
• /
• 2014

This paper presents a new method for measuring the half-wave voltage $V_{\pi}$ of an electro-optic phase modulator based on a phase-modulated photonic link with interferometric demodulation. By using this method, the $V_{\pi}$ can be obtained with the RF voltage amplitude input required to achieve 1-dB gain compression of link and the differential delay of a Mach-Zehnder interferometer. We measure the $V_{\pi}$ of a commercial phase modulator by using the presented method and the carrier/the first sideband intensity ratio method. Furthermore, we compare the two measurements with the typical value provided by the manufacturer. The experiment shows that this novel measurement method is feasible, straightforward, and accurate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8B
• /
• pp.1115-1121
• /
• 2010

The DNAv6 was designed to support fast attachment for a host, which is corresponding to the movement detection part in the mobility management. Since, however, the DNAv6 has supported only DNAv6-capable ARs and DNAv6-capable hosts, an non-DNAv6 host could not support fast handoff function in a DNAv6 network. In this paper, we consider a new method of the fast attachment of non-DNAv6 hosts. To support the non-DNAv6 host in DNAv6 networks, we suggest a novel algorithm, RCA algorithm, where an AR can decide whether a host has the DNAv6 function and whether it has moved to a new link or not, and then the AR can inform the host of new link information. For the RCA algorithm, we proposed to modify the RS message and the Reconf_Link message with addition of some fields. To validate our RCA algorithm and its performance, we have accomplished simulation tests for the ND process, the DNAv6 process and the modified DNAv6 process with our RCA algorithm. In the viewpoints of the attachment delay and complexity, the proposed algorithm gives the better delay performance than the ND process while it presents the less complexity than the DNAv6 process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.430-439
• /
• 2008

In this paper, we propose a sender-based TCP congestion control scheme for downward vertical handover (DVHO), in which mobile node moves from a cellular network to a wireless LAN. DVHO can give rise to severe performance problems in TCP throughput because it causes a drastic change of link characteristics. Particularly, TCP executes falsely congestion control by packet reordering, which is occurred from link delay difference between a cellular link and a wireless LAN link. Therefore, the congestion window is reduced. And unnecessary retransmissions wastes bandwidth. To solve these problems, we propose a method using estimated round-trip time in cellular link to process duplicated ACKs from reordering. Furthermore, the duplicated ACKs are used to the control congestion window size. Simulation result shows that the proposed scheme can solve problems. Moreover, the proposed scheme can have better performance than TCP New Reno and nodupack.

• The KIPS Transactions:PartC
• /
• v.12C no.4 s.100
• /
• pp.489-494
• /
• 2005

In 2002, Shundong Xia proposed a new ID-based group signature scheme with strong separability. The nature of a strong separability is to divide group manager's role into a membership manager and a revocation manager Jianhong et al showed that the scheme was not coalition-resistant. In this letter, we first propose two new attacks, forgery and link attacks, for Xia-You's scheme. We also propose a new ID-based group signature scheme that Is resistant to coalition, forgery and link attacks

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.8
• /
• pp.1544-1550
• /
• 2009

In this paper, a new single phase voltage sag/swell compensator using direct power conversion is proposed. A new compensator consists of input/output filter, series transformer and direct ac-ac converter, which is a single-phase back-to-back PWM converter without dc-link capacitors. Advantages of the proposed compensator include: simple power circuit by eliminating dc link electrolytic capacitors and thereby, improved reliability and increased life time of the entire compensator; simple PWM strategy or compensating voltage sag/swell at the same time and reduced switching losses in the ac-ac converter. Further, the proposed scheme is able to adopt simple switch commutation method without requiring complex four-step commutation method that is commonly employed in the direct power conversion. Simulation and experimental results are shown to demonstrate the advantages of the new compensator and PWM strategy. A 220V, 3kVA single-phase compensator based on the digital signal processor controller is built and tested.