• Journal of Radiation Protection and Research
• /
• 제15권2호
• /
• pp.113-122
• /
• 1990

원자력병원에 설치된 MC-50 의학용 싸이클로트론은 4년간의 장비 도입 계획, 장비 인수 및 설치 그리고 빔 특성조사를 거쳐서 1986년 11월부터 가동을 시작하였다. MC-50 싸이클로트론은 현재 중성자치료 및 방사성 동위원소 생산에 이용되고 있다. 1989년 12월 현재, 중성자선 치료는 총 179명(1852 sessions)의 환자에서 시행되었다. 핵의학 분야에 이용되는 방사성 동위원소의 생산은 표적운반, 표적용융, 빔 진단 그리고 화학적 처리과정에 관한 문제들을 해결하기 위한 다각적인 연구를 거친 후 1989년 3월부터 시작하였다. 이 논문은 중성자 치료와 동위원소 생산에 이용된 MC-50 싸이클로트론의 운영 현황 및 장비의 특성에 대하여 기술하였으며, 또한 1989년도의 운영결과 및 제반 문제점들을 요약하였다. 1989년도 총 운전시간은 1252.5시간이었으며 이 중 중성자 치료에 400시간을 이용하였다(599 sessions). 동위원소 생산에는 832.5시간을 이용하여 총 1695mCi(Ga-67 : 1478mCi, Tl-201 : 107 mCi, I-123 : 25mCi, In-111 : 85mCi)를생산하였다. 빔 특성실험 및 기타 연구에는 20시간을 이용하였다. 1989년도의 가동율은 88.2%이었으며 전년도의 71.0%에 비하여 현저히 향상되었다.

• 한국방사선학회논문지
• /
• 제16권3호
• /
• pp.351-356
• /
• 2022

전립선암의 방사선치료 시 사용되는 세기조절방사선치료와 부피적회전방사선치료시 발생하는 광중성자선량을 측정하여, 암 발생률을 평가하며 기초자료를 제공하고자 하였다. Rando phantom에 중성자 측정용 광자극발광선량계를 복부와 갑상선에 위치시킨 상태에서 발생하는 광중성자선량을 측정하였다. 연구결과 세기조절방사선치료(7 portal)가 부피적회전방사선치료보다 복부와 갑상선 위치에서 모두 높게 측정되었다. ICRP 103의 명목위험계수를 이용하여 암 발생확률을 평가하였을 때, 세기조절방사선치료시 대장과 갑상선의 피폭으로 인한 암발생확률은 1,000명 당 9.9명 이었으며, 부피적회전방사선치료시는 1,000명 당 3.5명이었다. ALARA(As low as reasonably archievable)원칙에 의거하여 방사선치료계획 수립에 있어서 정상장기들의 피폭선량의 최소화를 위한 가이드라인이 되리라 사료된다.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2419-2431
• /
• 2023

Experiments related to Boron Neutron Capture Therapy (BNCT) accomplished at the Institute of Nuclear Techniques (INT), Budapest University of Technology and Economics (TUB) are presented. Relevant investigations are required before designing BNCT for vivo applications. Samples of relevant boron compounds (H₃BO₃, BDTPA) usually employed in BNCT were investigated with neutron beam. Channel #5 in the research reactor (100 kW) of INT-TUB provides the neutron beam. Boron samples are mounted on a carrier for neutron irradiation. The particle attenuation of several carrier materials was investigated, and the one with the lowest attenuation was selected. The effects of boron compound type, mass, and compound phase state were also investigated. To detect the emitted charged particles, a traditional ZnS(Ag) detector was employed. The neutron beam's interaction with the detector-detecting layer is investigated. Graphite (as a moderator) was employed to change the neutron beam's characteristics. The fast neutron beam was also thermalized by placing a portable fast neutron source in a paraffin container and irradiating the H₃BO₃. The obtained results suggest that the direct measurement approach appears to be insufficiently sensitive for determining the radiation dose committed by the Alpha particles from the ¹⁰B (n,α) reaction. As a result, a new approach must be used.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1970-1978
• /
• 2021

The aim of this study was to optimize the target, moderator, and collimator (TMC) in a neutron beam generator for the accelerator-based BNCT (A-BNCT) system. The optimization employed the Monte Carlo Neutron and Photon (MCNP) simulation. The optimal geometry for the target was decided as the one with the highest neutron flux among nominates, which were called as angled, rib, and tube in this study. The moderator was optimized in terms of consisting material to produce appropriate neutron energy distribution for the treatment. The optimization of the collimator, which wrapped around the target, was carried out by deciding the material to effectively prevent the leakage radiations. As results, characteristic of the neutron beam from the optimized TMC was compared to the recommendation by the International Atomic Energy Agent (IAEA). The tube type target showed the highest neutron flux among nominates. The optimal material for the moderator and collimator were combination of Fluental (Al₂0₃+AlF₃) with ⁶⁰Ni filter and lead, respectively. The optimized TMC satisfied the IAEA recommendations such as the minimum production rate of epithermal neutrons from thermal neutrons: that was 2.5 times higher. The results can be used as source terms for shielding designs of treatment rooms.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.2139-2142
• /
• 2011

• Nuclear Engineering and Technology
• /
• 제41권4호
• /
• pp.531-544
• /
• 2009

This paper is intended to provide key issues and current research outcomes on accelerator-based Boron Neutron Capture Therapy (BNCT). Accelerator-based neutron sources are efficient to provide epithermal neutron beams for BNCT; hence, much research, worldwide, has focused on the development of components crucial for its realization: neutron-producing targets and cooling equipment, beam-shaping assemblies, and treatment planning systems. Proton beams of 2.5 MeV incident on lithium target results in high yield of neutrons at relatively low energies. Cooling equipment based on submerged jet impingement and micro-channels provide for viable heat removal options. Insofar as beam-shaping assemblies are concerned, moderators containing fluorine or magnesium have the best performance in terms of neutron accumulation in the epithermal energy range during the slowing-down from the high energies. NCT_Plan and SERA systems, which are popular dose distribution analysis tools for BNCT, contain all the required features (i.e., image reconstruction, dose calculations, etc.). However, detailed studies of these systems remain to be done for accurate dose evaluation. Advanced research centered on accelerator-based BNCT is active in Korea as evidenced by the latest research at Hanyang University. There, a new target system and a beam-shaping assembly have been constructed. The performance of these components has been evaluated through comparisons of experimental measurements with simulations. In addition, a new patient-specific treatment planning system, BTPS, has been developed to calculate the deposited dose and radiation flux in human tissue. It is based on MCNPX, and it facilitates BNCT efficient planning based via a user-friendly Graphical User Interface (GUI).

• 한국의학물리학회지:의학물리
• /
• 제18권2호
• /
• pp.87-92
• /
• 2007

최대출력 30 MW, 하나로(HANARO) 다목적 연구용 원자로의 접선 중성자공에 붕소중성자포획치료(Boron Neutron Capture Therapy, BNCT)를 위한 열중성자 조사장치가 개발되었다. BNCT 조사장치에서는 서로 다른 물리적 특성과 생물학적 효과비를 가진 여러 성분의 방사선이 방출되기 때문에 정확한 투여선량을 결정하기 위해서는 각 성분의 정량적 분석이 필수적이다. 따라서 본 연구에서는 방사화 분석, 열형광선량계 및 이온전리함 등 여러 유형의 검출기를 사용하여 BNCT 조사장치에서 방출되는 열중성자 및 감마선 혼합장의 선량 성분을 분리, 측정하였다. 선량측정은 물 속에 함유된 불순물과 중성자의 이차반응을 최소화하기 위해 증류수를 채운 물팬텀을 이용하였다. 그리고 측정 결과는 MCNP4B 전산계산의 결과와 상호 비교하였다. 측정 결과 열중성자속은 물팬텀 10 mm와 20 mm 깊이에서 각각 $1.02E9n/cm^2{\cdot}s$과 $6.07E8n/cm^2{\cdot}s$이었고, 고속중성자선량율은 10 mm 깊이에서 0.11 Gy/hr로 미세하였다. 감마선량률은 물팬텀 20 mm 깊이에서 5.10 Gy/hr로 나타났다. 측정된 중성자와 감마선량값은 MCNP의 결과와 5% 이내로 잘 일치하였고, 열중성자속은 14%의 비교오차를 나타내었다. 이러한 결과들은 중성자 검출의 난이도를 고려할 때 충분히 신뢰할 수 있는 수준이라 판단되며, BNCT 임상 연구를 위한 선량평가 자료로 활용할 수 있을 것으로 사료된다.

• 한국방사선학회논문지
• /
• 제13권7호
• /
• pp.917-924
• /
• 2019

양성자 치료기의 Passive Scattering System 노즐을 모의모사 하여 노즐 내 각 구성품에서 발생되는 중성자를 에너지별로 평가하였다. MCNPX code를 이용하여 치료환경에 사용되는 양성자 에너지 220 MeV, 도달거리 20 cm, 6 cm 길이의 SOBP를 구현하고, 치료기 가동 시 발생하는 중성자를 각 구성품에 따라 종류별로 분류하였다. 양성자 가속기 구성품 중 산란체에서 중성자가 가장 높게 발생되었으며 양성자의 중심 선속에서부터 멀어질수록 중성자의 선속은 감소되었다. 본 연구는 양성자 가속기의 유지 보수 및 해체에 필수적인 방사화 평가를 진행하기 위한 기초자료로 활용할 수 있을 것으로 사료된다.

• 한국의학물리학회지:의학물리
• /
• 제29권4호
• /
• pp.101-105
• /
• 2018

In this paper, a neutron moderation system for boron neutron capture therapy (BNCT) based on a $^{252}Cf$ neutron source is proposed. Different materials have been studied in order to produce a high percentage of epithermal neutrons. A moderator with a construction mixture of $AlF_3$ and Al, three reflectors of $Al_2O_3$, BeO, graphite, and seven filters (Bi, Cu, Fe, Pb, Ti, a two-layer filter of Ti+Bi, and a two-layer filter of Ti+Pb) is considered. The MCNPX simulation code has been used to calculate the neutron and gamma flux at the output window of the neutronic system. The results show that the epithermal neutron flux is relatively high for four filters: Ti+Pb, Ti+Bi, Bi, and Ti. However, a layer of Ti cannot reduce the contribution of ${\gamma}$-rays at the output window. Although the neutron spectra filtered by the Ti+Bi and Ti+Pb overlap, a large fraction of neutrons (74.95%) has epithermal energy when the Ti+Pb is used as a filter. However, the percentages of the fast and thermal neutrons are 25% and 0.5%, respectively. The Bi layer provides a relatively low epithermal neutron flux. Moreover, an assembly configuration of 30% $AlF_3+70%$ Al moderator/$Al_2O_3$ reflector/a two-layer filter of Ti+Pb reduces the fast neutron flux at the output port much more than other assembly combinations. In comparison with a recent model suggested by Ghassoun et al., the proposed neutron moderation system provides a higher epithermal flux with a relatively low contamination of gamma rays.

• Radiation Oncology Journal
• /
• 제11권1호
• /
• pp.127-132
• /
• 1993

Total of 53 patients of unresectable and recurrent rectal cancer treated with neutron beam during the period from Oct.1987 to Apr.1992 were analyzed. Dose fractionation for the neutron only group was 1.5 Gy per fraction,3 fraction per week,21 Gy/41/2 wks for 42 patients out of 53 ($76{\%}$). Neutron only but modified fractionation schedule ($10{\%}$ more or less of total dose) was applied for 9 patients, and mixed beam (neutron boost) was for 4 patients, Complete tumor response was obtained in 40 patients ($76{\%}$, response rate). Local control rate was 28 out of 53 ($53{\%}$). Statistically significant better prognostic factors for local control were age below 49 years old (15/22, $68{\%}$) than above 50 years old (13/31, $42{\%}$), male (20/32, $63{\%}$) than female (8/21, $38{\%}$), tumor size less than 5 cm and non-metastatic (16/24, $67{\%}$) than size more than 5 cm or metastatic (12/29, $41{\%}$). Major complication had developed in 7 patients ($13{\%}$). Two year overall survival rate by Kaplan-Meier method was $30{\%}$, but it was rised to, $47{\%}$ when the turner was less than 5 cm non-metastatic.