• Journal of Korean Society on Water Environment
• /
• v.26 no.2
• /
• pp.303-310
• /
• 2010

Recently distinguished AOP means technology resolving organic compounds in water to harmless compounds such as $CO_2$ and $H_2O$ by creating OH radical ($OH{\cdot}$) with more powerful oxidation than general oxidants. It has merits which the 2nd pollution is not caused since it uses solar energy, sludge doesn't take place, it can be applied to high-density waste water and it oxidizes non-biodegradable organic compounds more easily. The purpose of the study was to examine about removable characteristics of phenol which was a non-biodegradable organic matter with UV/$O_3$/Catalyst processes which is one out of AOP and to present applicability of photocatalyst and the optimum conditions of treatment. The study regarded initial phenol concentration, initial pH, photocatalyst amount and flow as its conditions. As the results, the test had the highest removable efficiency (92%) when initial phenol concentration was 100 mg/L, initial pH 7, photocatalyst amount 6L and flow 1.5 mg/min. The removable efficiency was increased as much as initial phenol concentration was increased, when initial pH was 7 (neutrality), photocatalyst amount was increased and flow was increased. It was checked that the optimum HRT was 12 hours. Therefore, phenol is enough removable with UV/$O_3$/Catalyst process and its prospect in the future is expected.

• Journal of ILASS-Korea
• /
• v.27 no.2
• /
• pp.84-93
• /
• 2022

To implement carbon-neutrality in transportation sectors until 2050, hydrogen is considered a promising fuel for internal combustion engines because hydrogen does not contain carbon itself. Although hydrogen does not emit CO₂ emission from its combustion process, the low energy density in a volume unit hinders the adoption of hydrogen. Therefore, the understanding of hydrogen jet behavior and measurement of equivalence ratio must be conducted to completely implement the high-pressure hydrogen direct injection. The main objective of this research is feasibility test of hydrogen local equivalence ratio measurement by laser-induced breakdown spectroscopy (LIBs). To visualize the macroscopic structure of hydrogen jet, high-speed schlieren imaging was conducted. Moreover, LIBs has been adopted to validate the feasibility of hydrogen local equivalence ratio measurement. The hydrogen injection pressure was varied from 4 MPa to 8 MPa and injected in a constant volume chamber where the ambient pressure was 0.5 MPa. The increased injection pressure extends the vertical penetration of hydrogen jet. Due to the higher momentum supply when the injection pressure is high, the hydrogen has easily diffused in all directions. As the laser trigger timing has delayed, the low hydrogen atomic emission was detected due to the longer mixture formation time. Based on equivalence ratio measurement results, LIBs could be applied as a methodology for hydrogen local equivalence ratio measurement.

• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.183-185
• /
• 2022

High-income mushroom crops require complex farming. Therefore, we conducted a test to identify the optimum temperature for the production of antler-shaped Ganoderma lucidum using the King Oyster mushroom cultivation facility. T-N showed 0.28% of oak sawdust and 2.2% of nutritional source. The pH of oak sawdust was 6.0, indicating weak acidity, and that of rice steel was 6.6, indicating neutrality in nutrition source. Study on the quality characteristics of mushrooms showed that the number of days at 25℃ were 5~6 and those at 30℃ were 3~5; the representative length at 25℃ was 57.5 mm and that at 30℃ was 92.2 mm; the biological weight at 25 ℃ was 43 g, which was greater than that at 30℃.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.112-119
• /
• 2022

Recently, as carbon neutrality has been important factor in the construction industry, many studies have been conducted on the high-volume fly ash concrete. High volume fly ash concrete(HVFC) is usually made by replacing more than 50% of cement with fly ash. However, HVFC has a disadvantage of low compressive strength in early age. To overcome this shortcoming of HVFC, improve this, interest in techonolgy using nanomaterials is increasing. Nano silica is expected to improve the early age strength of HVFC as a pozzolanic material. This study investigated the effect of nano silica on the early hydration reaction and microstructure of HVFC. The early hydration reaction of HFVC was analyzed through setting time, isothermal calorimeter, compressive strength and thermal weight analysis. In addition, the microstructure of HVFC was measured by mercury intrusion porosimetry. From the test results, it was confirmed that nano silica increased the early age strength and improve the microstructure of HVFC.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.25-31
• /
• 2023

In this study, the basic properties of CO₂ immobilized desulfurized gypsum (CFBG) and the possibility of being used as a stimulus for slag cement were reviewed, and performance evaluation was conducted through a concrete mixing test. The main components of CFBG were CaO and SO₃, and CaO and SO₃ increased as the drying temperature increased. The moisture content of undried CFBG was 15.7 %, the drying temperature was 1.7 % and the drying temperature was 0.03 % at 105 ℃. Mortar using CFBG tended to have a lower flow value as the drying temperature increased, and the compressive strength was equivalent to that of the FGB use mixture. As a result of the concrete experiment using CFBG SC, both slump and air volume satisfied the target range after 60 minutes, and the compressive strength tended to increase overall compared to the ternary binder mixture.

• Transactions of Materials Processing
• /
• v.33 no.2
• /
• pp.103-111
• /
• 2024

With the increasing global interest in carbon neutrality, the automotive industry is also transitioning to the production of eco-friendly cars, specifically electric vehicles. In order to achieve comparable driving distances to internal combustion engine vehicles, the application of high-capacity battery packs has led to an increase in vehicle weight. To achieve light-weighting and durability requirements of automotive components simultaneously, there is a demand for research on the application of Ultra-High Strength Steel (UHSS). However, when manufacturing chassis components using UHSS, there are challenges related to fracture defects due to lower elongation compared to regular steel sheets, as well as spring-back issues caused by high tensile strength. In this study, a simulated specimen that is not affected by the property changes of four materials was designed to improve formability of the rear cross member, which is the most challenging automotive chassis component. The influence and correlation of material-specific variables were analyzed through finite element analysis (FEA) for each material with tensile strength of 440, 590, 780, and 980 MPa grades, resulting in the development of a predictive equation. To validate the equation, the simulated specimens of 980 MPa grade were produced from the test molds. Then the reliability of the FEA and predictive equation was verified with measured specimen data using a 3D scanner. The results of this study can be proposed to improve the formability of UHSS chassis components in future researches.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.43-52
• /
• 2021

As port development in soft ground is actively promoted for international logistics and transportation, the Deep Mixing Method (DMM) is continuously applied to form an improved column body directly in the ground by mixing cement with soil to secure the stability of the structure. However, in the case of cement, there is a problem of emitting a lot of greenhouse gases during the production process, so the development and use of new alternative materials are socially required to achieve the national goal of carbon neutrality. Accordingly, in this study, CMD-SOIL, developed to induce a hardening reaction similar to cement by recycling recycled resources, was used as a ground improvement material for the DMM. In addition, it was attempted to determine the possibility of replacing cement by conducting on-site test construction and evaluating applicability. As a result of the study, the compressive strength of CMD-SOIL compared to the design reference strength was 1.46 to 2.64 times higher in the field mixing test and 1.2 to 5.03 times higher than in the confirmed boring. In addition, the ratio (λ) of the compressive strength in the field to the design reference strength was 0.63 to 1.14, which was similar to the previous research results. Therefore, in the case of CMD-SOIL, it is possible to express the compressive strength necessary to secure stability, and there is no difference in applicability compared to existing materials such as ordinary portland cement and blast furnace slag cement, so it was analyzed that it could be used as a ground improvement material for the DMM.

• Microbiology and Biotechnology Letters
• /
• v.50 no.2
• /
• pp.211-217
• /
• 2022

Sodium hypochlorite (NaClO) is a disinfectant widely used in hospitals and food industries because of its antimicrobial activity against not only bacteria but also fungi and virus. The antibacterial activity of NaClO lies in the maintenance of a stable hypochlorous acid (HClO) concentration, which is regulated by pH of the solution. HClO can easily penetrate bacterial cell membrane due to its chemical neutrality and the antibacterial activity of NaClO is thought to depend on the concentration of HClO in solution rather than hypochlorite ions (ClO^-). In this study, we investigated the antibacterial activity of NaClO according to pH adjustment by means of time kill test and assays of Reactive Oxygen Species (ROS) and adenosine triphosphate (ATP) concentration changes before and after NaClO treatment. We also investigated that the degree of cell wall destruction through field emission scanning electron microscopy (FE-SEM). Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) exposed to 5 ppm NaClO at pH 5 exhibited 99.9% mortality. ROS production at pH 5 was 48% higher than that produced at pH 7. In addition, the ATP concentration in E. coli and S. aureus exposed to pH 5 decreased by 94% and 91%, respectively. As a result of FE-SEM, it was confirmed that the cell wall was destroyed in the bacteria by exposing to pH 5 NaClO. Taken together, our results indicate that the antibacterial activity of 5 ppm NaClO can be improved simply by adjusting the pH.

• Journal of Science of Art and Design
• /
• v.1
• /
• pp.63-93
• /
• 1999

This treatise begins with finding a meaning of Paul Klee's . It is pretty simpleto choose the square of Klee. The most important formative language for twenty century is abstraction. The element of speaking for abstraction issquare. The artists are trying to contain the nature and universe in the square. The role of magic square consisting with small squares of Klee is crystallized. The other side, the test of this study is a method analysis. The method analysis is changing while concept and style have been changing according to a period. The existing method analysis is an iconology used many times in Art history. This treatise introduces France symbolists, Bernard Cocula and Claude Peyroutet's analysis of a meaning of image(Semantique do l'image) who were applied to Modern Art. based on Iconography. It also applies to analysis of artwork of Klee. Cocula's is developed from one phase to five phase step by step. The first phase deals with an appearance of artwork. Subsequently, the second phase is directly adjacent to personal feeling and impression. This is an adequate method for image study in the analysis of modern arts. This phase makes it a rule to enjoy talking with artworks above all. The third phase begins with this question 'What do you see? (que voyons-nous?).' The applies exhaustively and strictly to complicated image artworks which need an elaborate analysis. It is very hard but audiences must try to maintain neutrality in front of artwork because cord formation and interpretation should be formed objectively. The meaning analysis and interpretation of the forth phase begins with this question 'what is the image rouse'(qu'evoque cote image?).' This phase is the most important in a process of symbolic analysis. The audience investigates personal elements and common elements. The fifth is synthetic analysis and interpretation phase. The synthesis is last phase and it reaches a valuation and a conclusion. Namely, the synthesis phase makes up synthesis conclusion, summarizes image character, and completes value adjudication. Sometimes it completes no conclusions in a silence. This study found a new possible analysis example from Paul Klee's work. The study emphasizes square analysis and interpretation and uses . The analysis of artwork by Cocula's is an example of the most important work of Klee's three artworks. The first analysis of artwork is and the second one is . The third one is . In these analyses, Klee usedmagic square 'to make natural pictorial element and to explain organic living things.'

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.8-16
• /
• 2024

Limestone (CaCO₃, calcium carbonate), which is used as a raw material in the portland cement and steel industry, emits CO₂ through decarbonation by high temperatures in the manufacturing process. To reduce CO₂ emissions by the use of raw materials like limestone, it has been proposed to replace limestone with various industrial by-products that contain CaO but less or none of the carbonated minerals, that cause CO₂ emissions. Loss of Ignition (LOI), Thermogravimetric analysis (TG), and Infrared Spectroscopy (IR) are used to quantitative the amount of CO₂ emission by using these industrial by-products, but CO₂ emissions can be either over or underestimated depending on the characteristics of by-product materials. In this study, we estimated CO₂ contents by LOI, TG, IR and DTG(Differential Thermogravimetric analysis) of calcite(CaCO₃) and samples that contain CO₂ in the form of carbonate and whose weight increases by oxidation at high temperatures. The test results showed for CaCO₃ samples, all test methods have a sufficient level of reliability. On the other hand, for the CO₂ content of the sample whose weight increases at high temperature, LOI and TG did not properly estimate the CO₂ content of the sample, and IR tended to overestimate compared to the predicted value, but the estimated result by DTG was close to the predicted valu e. From these resu lts, in the case of samples that contain less than a few percent of CO₂ and whose weight increases during the temperature that carbonate minerals decompose, estimating the CO₂ content using DTG is a more reasonable way than LOI, TG, and IR.