• 항공우주시스템공학회지
• /
• 제5권1호
• /
• pp.1-6
• /
• 2011

It is very important to correctly set control surface linkage. But a lot of bad setting case has been seen in especially remote controled airplanes and middle size UAVs. In this paper, a three dimensional linkage from control surface to deflection sensor was analyzed kinematically and a position analysis was simulated using algebraic algorithm in terms of nonlinear error of deflection angle. Three correct settings of the linkage came out of this research. One is two-dimensional motion, another is link ratio of 1 and the other is that effective lever of the control surface should be perpendicular to a pushrod in their neutral position.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.64-64
• /
• 2010

Ice film surfaces were examined by using the reactive ion scattering (RIS) of low energy (<35 eV) cesium ion beams. Neutral molecules (X) on the surface were detected in the form of cesium-molecule ion clusters (CsX+). Ionic species on the surface were desorbed from the surface via a low energy sputtering (LES) process below the threshold energy of secondary ion emission. The RIS and LES methods allowed us to study the H/D exchange reactions between H2O and D2O molecules on the surface and the associated proton transfer mechanisms. Specifically, H/D exchange kinetics was examined for D2O ice films (~10 BL) covered with a small amount of H2O (<0.5 BL), in the presence or absence of HCl adsorbates which provided excess protons on the surface.

• Asian Journal of Atmospheric Environment
• /
• 제12권1호
• /
• pp.47-58
• /
• 2018

The aim of this work is to investigate the effect of atmospheric stability on near-field pollutant dispersion from rooftop emissions of a single cubic building using computational fluid dynamics (CFD). This paper used the shear stress transport (here after SST) k-${\omega}$ model for predicting the flow and pollutant dispersion around an isolated cubic building. CFD simulations were performed with two emission rates and six atmospheric stability conditions. The results of the simulations were compared with the data from wind tunnel experiments and the result of simulations obtained by previous studies in neutral atmospheric condition. The results indicate that the reattachment length on the roof ($X_R$) obtained by computations show good agreement with the experimental results. However, the reattachment length of the rooftop of the building ($X_F$) is greatly overestimated compared to the findings of wind tunnel test. The result also shows that the general distribution of dimensionless concentration given by SST k-${\omega}$ at the side and leeward wall surfaces is similar to that of the experiment. In unstable conditions, the length of the rooftop cavity was decreased. In stable conditions, the horizontal velocity in the lower part around the building was increased and the vertical velocity around the building was decreased. Stratification increased the horizontal cavity length and width near surface and unstable stratification decreased the horizontal cavity length and width near surface. Maintained stability increases the lateral spread of the plume on the leeward surface. The concentration levels close to the ground's surface under stable conditions were higher than under unstable and neutral conditions.

• 한국주거학회논문집
• /
• 제10권1호
• /
• pp.75-84
• /
• 1999

The purpose of this study is to identify the characteristics of the thermal environment, and to analyze the relationship between the thermal reactions and the skin temperatures in the lying position in the radiant floor heating system. The results are as follows: 1) The globe temperature was nearly equal to the operative temperature in the room. 2) The floor surface temperature and the globe temperature were 26.4$^{\circ}C$ and 23.6$^{\circ}C$, respectively when the whole body temperature was at neutral point. 3) The mean temperature of the six skin parts was 31.3$^{\circ}C$ (cold thermal environment); 34.1$^{\circ}C$ (neutral thermal environment); 35.1$^{\circ}C$ (hot thermal environment).

• Membrane and Water Treatment
• /
• 제1권2호
• /
• pp.93-101
• /
• 2010

This study examined the effects of feed water chemistry and membrane fouling on the rejection of trace organics by a loose nanofiltration membrane. One ionisable and one non-ionisable trace organics were selected for investigation. Results reported here indicate that the solution pH and ionic strength can markedly influence the removal of the ionisable trace organic compound sulfamethoxazole. These observations were explained by electrostatic interactions between the solutes and the membrane surface and by the speciation of the ionisable compound. On the other hand, no appreciable effects of solution pH and ionic strength on the rejection of the neutral compound carbamazepine were observed in this study. In addition, membrane fouling has also been shown to exert some considerable impact on the rejection of trace organics. However, the underlying mechanisms remain somewhat unclear and are subject to on-going investigation.

• 한국의류산업학회지
• /
• 제7권3호
• /
• pp.339-345
• /
• 2005

It is difficult to dye nylon/viscose rayon mixture fabrics by one-bath one-step dyeing method, because acid dyes and reactive dyes require acidic dyebath for adsorption and alkaline dyebath for fixation respectively. In order to overcome the disadvantage of the conventional two bath two step dyeing method of nylon/viscose rayon mixture fabric, it was pretreated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. The pretreated nylon/viscose rayon mixture fabrics produced cationized fabrics that could be dyed with acid dyes and reactive dyes under neutral condition. This study was carried out to investigate dyeing possibilities, surface reflectance spectra and color characteristics of cationized nylon/viscose rayon mixture fabrics with acid dyes and reactive dyes in a non-electrolytic and neutral dyebath by one bath one step dyeing method.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2348-2352
• /
• 2013

We report a simple electrochemical approach in fabricating multiple colored molybdenum (Mo) oxide bronzes on the surface of a Mo-quartz electrode. A three step electrochemical batch process consisting of linear sweep voltammetry and anodic oxidation followed by cathodic reduction in neutral $K_2SO_4$ electrolyte at different end potentials, viz. -0.62, -0.80 and -1.60 V (vs. $Hg/HgSO_4$) yielded red, blue and yellow colored bronzes. The samples produced were analyzed by XRD, EDS, and SIMS. The color variation was suggested to be associated with the cations intercalation into the oxide formed and the simultaneous structural changes that occurred during the cathodic reduction in neutral aqueous medium.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2002년도 추계학술대회 및 정기총회
• /
• pp.25-28
• /
• 2002

본 논문에서는 $E^{2}\;_{N}$상에서 비국소 초기 조건을 갖는 비선형 퍼지 미분방정식에 대한 제어가능성에 관한 연구이다.

• Bulletin of the Korean Chemical Society
• /
• 제13권3호
• /
• pp.259-265
• /
• 1992

Cyclic voltammetric behavior of symmetric (dimethyl, diheptyl, dioctyl, dibenzyl) and asymmetric (methyloctyl, methyldodecyl, methylbenzyl) viologens was investigated in homogeneous aqueous solution and sodium dodecyl sulfate (SDS) micellar media. In SDS-free 0.1 M NaCl solutions, the reduction potential is less negative as the chain length of alkyl substituent is longer. This is due to the stabilization of the reduced cationic radical and neutral form of viologen by adsorption on electrode surface. The adsorbed species show the "aging-effect". With the exceptions of methyldodecyl viologen and methylbenzyl viologen, the viologens show strong tendency of conproportionation reaction between viologen dications and neutral forms. In cases of methyldodecyl viologen and methylbenzyl viologen, the conproportionation reaction is kinetically disfavored, though it is thermodynamically favorable. SDS micelles dissolve the adsorbed species and the viologens exhibit two reversible redox processes in SDS micellar solutions. The reduction potentials of viologens in SDS micellar solutions depend little on the length of alkyl chain. Benzyl-substituted viologens are more easily reduced than the alkyl substituted viologens, presumably due to electron-withdrawing character of benzyl group.

• 소음진동
• /
• 제7권6호
• /
• pp.975-984
• /
• 1997

A direct boundary element method (DBEM) is developed for thin bodies whose surfaces are rigid or compliant. The Helmholtz integral equation and its normal derivative integral equation are adoped simultaneously to calculate the pressure on both sides of the thin body, instead of the jump values across it, to account for the different surface conditions of each side. Unlike the usual assumption, the normal velocity is assumed to be discontinuous across the thin body. In this approach, only the neutral surface of the thin body has to be discretized. The method is validated by comparison with analytic and/or numerical results for acoustic scattering and radiation from several surface conditions of the thin body; the surfaces are rigid when stationary or vibrating, and part of the interior surface is lined with a sound-absoring material.