• 설비공학논문집
• /
• 제21권11호
• /
• pp.591-598
• /
• 2009

The service quality with the various building equipments tends to depend on the individual superintendent's capability and efforts generally and this often lead to poor maintenances and managements of them. N-BMS(Networked Building Management System), proposed in this study, is a new type of building management method, which links principal equipments within many buildings into a communication network and carries out several significant missions such as fault detection, deterioration diagnosis and control the equipments and so on, as well as monitoring which is the main and unique purpose of the conventional BMS. How to construct the N-BMS was considered to keep performance of equipments high and thus to save energy and resource. LCC(Life Cycle Cost) based analysis was also performed in order to verify the effects of some maintenance and management works for the building HVAC systems.

• 전자공학회논문지SC
• /
• 제48권3호
• /
• pp.6-12
• /
• 2011

다중 구동기로 이루어진 실시간 분산제어시스템으로 전기자동차, 다중 로봇시스템 등을 들 수 있다. 이러한 시스템들에는 여러 개의 프로세서가 필수적으로 요구된다. 시스템 구성요소별로 프로세서를 내장한 제어 기기에는 모듈화, 소형화, 저전력화 및 상호운용가능성과 내고장성이 요구되며, 이를 위해서 제어시스템이 네트워크기반 실시간 분산제어시스템의 형태로 구현될 필요가 있다. 네트워크기반 실시간 분산제어시스템 구현 시 각 구동부간 동기화 문제에 의해 고속, 고정밀 및 고신뢰성을 갖는 것이 어렵다. 동기화 문제의 원인으로는 부하변동, 구동부간 동특성 불일치 및 구동부 제어기기간의 통신에 따른 시간지연을 들 수 있다. 본 연구에서는 연결 부하가 서로 다른 경우와 연결부하 뿐만 아니라 구동 모터의 동역학적 특성도 다른 경우의 단일 링크 머니퓰레이터에 대하여 외란관측기와 칼만 필터를 이용한 동기화 제어법과 목표치와 실측치 및 실측치들 사이의 에러 벡터의 노름에 대한 스칼라 함수를 정의하고 이 함수의 기울기 벡터를 최소화시키는 목표궤적을 이용한 동기화제어법을 제시하고 실험을 통하여 그 유용성을 확인한다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국지능시스템학회 2007년도 추계학술대회 학술발표 논문집
• /
• pp.411-414
• /
• 2007

본 논문은 뉴트럴 타입 시간 지연을 갖는 네트워크 시스템의 안정도 분석 및 퍼지 제어기 설계에 대해서 논의한다. 먼저 대상이 되는 네트워크 시스템은 TS (Takagi-Sugeno: T-S) 퍼지 모델로 표현 되어진다. 리아프노프-크라조브스키의 안정도 이론을 이용하여 뉴트럴 형태의 시간 지연을 갖는 퍼지 시스템의 안정도를 판별한다. 퍼지 시스템의 안정도 조건을 시간 지연에 종속적인 충분조건으로 제시하고 선형 행렬 부등식의 형태로 표현한다. 선형 행렬 부동식의 해를 구하고 이를 바탕으로 퍼지 제어기의 이득값을 설계한다. 제안된 방법의 효율성과 가능성을 보여주기 위해 한 예제를 포함한다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제6권4호
• /
• pp.293-298
• /
• 2006

In this paper, a sensor fusion based robot navigation method for the autonomous control of a miniature human interaction robot is presented. The method of navigation blends the optimality of the Fuzzy Neural Network(FNN) based control algorithm with the capabilities in expressing knowledge and learning of the networked Intelligent Robotic Space(IRS). States of robot and IR space, for examples, the distance between the mobile robot and obstacles and the velocity of mobile robot, are used as the inputs of fuzzy logic controller. The navigation strategy is based on the combination of fuzzy rules tuned for both goal-approach and obstacle-avoidance. To identify the environments, a sensor fusion technique is introduced, where the sensory data of ultrasonic sensors and a vision sensor are fused into the identification process. Preliminary experiment and results are shown to demonstrate the merit of the introduced navigation control algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.94.1-94
• /
• 2002

This paper is concerned with parallel FFT and Quick-Merge Sort. They are implemented on computers interconnected by VMIC 5579 reflective memory and a cluster of workstations (PCs) interconnected via Fast Ethernet. Message passing interface (MPI) parallel library is used for communication in a cluster of workstations. An improved parallel FFT is also presented to decrease an execution time in the case of a small number of hosts. Distributed shared memory (DSM), VMIC 5579 reflective memory (RM), a cluster of workstations (COW) and message passing interface (MPI) parallel library are described.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.592-596
• /
• 1988

PCS(Process Computer System) is installed to monitor various kinds of process parameters in Power Plant and networked for synthetic monitor and event analysis in all site. But when an event is occured sequentially or simultaneously among the plants, it is difficult to analyze it because of different Standard-Time in each Plant. Standard-Time Receiving Device is developed to solve this problem and development procedure is descried here.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.385-389
• /
• 1988

PCS(Process Computer System) is installed to monitor various kinds of process parameters in Power Plant and networked for synthetic monitor and event analysis in all site. But when an event is occured sequentially or simultaneously among the plants, it is difficult to analyze it because of different Stardard-Time in each plant. Standard-Time Receiving Device is developed to solve this problem and development procedure is described here.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.82.4-82
• /
• 2001

Requirements for device control networks differ greatly from those of data (business) networks. Consequently, any control network which uses a filedbus protocol is, in general, different from If network protocol TCP/IP. One then needs to integrate both fieldbus protocol and TCP/IP to realize distributed control over IP network or internet. LonWorks technology provides networked intelligent I/O and controllers which make it a powerful, expandable solution. Connecting these remote Lon Works networks to the Internet can provide a powerful, integrated, distributed control system. This paper suggests a basic concept that be applied to distributed control over IP network or internet. Specially, Lonworks technology that used LonTalk protocol is reviewed as device network and ...

• 제어로봇시스템학회논문지
• /
• 제12권4호
• /
• pp.346-352
• /
• 2006

In a networked control system (NCS), time delays which are larger than one sampling period can change the control period. As a result, it may cause system instability. This paper presents a control method for an NCS using the controller area network (CAN), where time delays arise in the control loop. Specifically, a simple yet efficient method is proposed to improve control performance in the presence of time delays. The proposed method, which can be regarded as a gain scheduling method, selects a suitable LQ control gain among several gains to deal with the problems due to the change of control period. It is found that the gain can be scheduled in terms of the relation between the gain and the sampling period, which is represented by first-order algebraic equations. The proposed method is evaluated with an inverted cart pendulum system where the actuator and sensors are connected through the CAN. Experiment results are presented to show the efficiency of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1551-1552
• /
• 2008

본 논문은 네트워크 기반 제어시스템(NCS: Networked Control Systems)에 모델매칭 제어기법을 적용한 효율적인 제어알고리즘을 제안한다. 비선형의 특징을 가지는 제어기 및 관측기의 시간지연을 Taylor 근사법으로 선형화하여 선형시스템 이론을 적용한 모델매칭 제어기를 설계하였다. 또한, 제어기의 차수를 우세극 기법과 극,영점 상쇄기법(Pole-Zero Cancelation)을 통해 저차화한 후 그 타당성을 검증하였다. 제안한 제어알고리즘의 컴퓨터 시뮬레이션을 실시하였으며 기존의 고차 모델매칭 제어기와 비교분석하여 타당성 및 신뢰성을 검증하였다.