• Journal of Navigation and Port Research
• /
• v.40 no.5
• /
• pp.271-278
• /
• 2016

Localized atmospheric conditions between multi-reference stations can bring the tropospheric delay irregularity that becomes an error terms affecting positioning accuracy in network RTK environment. Imbalanced network error can affect the network solutions and it can corrupt the entire network solution and degrade the correction accuracy. If an anomaly could be detected before the correction message was generated, it is possible to eliminate the anomalous satellite that can cause degradation of the network solution during the tropospheric delay anomaly. An atmospheric grid that consists of four meteorological stations was used to detect an inhomogeneous weather conditions and tropospheric anomaly applied AWSs (automatic weather stations) meteorological data. The threshold of anomaly detection algorithm was determined based on the statistical weather data of AWSs for 5 years in an atmospheric grid. From the analytic results of anomaly detection algorithm it showed that the proposed algorithm can detect an anomalous satellite with an anomaly flag generation caused tropospheric delay anomaly during localized atmospheric conditions between stations. It was shown that the different precipitation condition between stations is the main factor affecting tropospheric anomalies.

• Journal of Environmental Science International
• /
• v.20 no.1
• /
• pp.81-91
• /
• 2011

Air quality monitoring networks are very important facilities to manage urban air pollution control and to set up an environmental policy. Since air quality monitoring network of Daegu was allocated from 1980s to mid-90s, there is need to reevaluate it and relocated its site. This study was evaluated the position of Daegu air quality monitoring station by unit environmental sensitivity index, grid emission rate, CAI (Comprehensive Air-quality Index) point. The investigation domain covered an area of 16 $\times$ 24 km centered at the metropolitan area of Daegu with grid spacing of 2 km. The location of alternative air quality monitoring networks was selected through optimization and quintiles analysis of total score. The result showed that all things considered, new air quality monitoring network need to install grid numbers 10, 28, 36, 37, 46. We also recommand three scenarios of alternative air quality monitoring network when considering unit environmental sensitivity index, emission rate and CAI point.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.12
• /
• pp.565-572
• /
• 2017

Traditional method for time series analysis, autoregressive integrated moving average (ARIMA) allows to mine significant patterns from the past observations using autocorrelation and to forecast future sequences. However, Korean baseball games do not have regular intervals to analyze relationship among the past attendance observations. To address this issue, we propose artificial neural network (ANN) based attendance prediction model using various measures including performance, team characteristics and social influences. We optimized ANNs using grid search to construct optimal model for regression problem. The evaluation shows that the optimal and ensemble model outperform the baseline model, linear regression model.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.5
• /
• pp.111-124
• /
• 2010

AMI (Advanced Metering Infrastructure) is a core infrastructure of Smart Grid, and is promoting in various country. Wireless network is considered for cost savings and operational efficiencies in AMI. But various security problems are expected in wireless networks of AMI, so we should solve these problems. In this paper, we suggest a wireless network of AMI by using Binary CDMA and security countermeasures of AMI wireless network. Proposed security architecture is using BSIM (Binary Subscriber Identity Module) to perform user authentication and key agreement for the encryption and decryption over radio network to reduce security threats.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.1
• /
• pp.83-104
• /
• 2011

Mobile grid is a combination of grid computing and mobile computing to build grid systems in a wireless mobile environment. The development of network technology is assisting in realizing mobile grid. Mobile grid based on established grid infrastructures needs effective resource management and reliable job scheduling because mobile grid utilizes not only static grid resources but also dynamic grid resources with mobility. However, mobile devices are considered as unavailable resources in traditional grids. Mobile resources should be integrated into existing grid sites. Therefore, this paper presents a mobile grid middleware interconnecting existing grid infrastructures with mobile resources and a mobile service agent installed on the mobile resources. This paper also proposes a mobile resource reliability-based job scheduling model in order to overcome the unreliability of wireless mobile devices and guarantee stable and reliable job processing. In the proposed job scheduling model, the mobile service agent calculates the mobile resource reliability of each resource by using diverse reliability metrics and predicts it. The mobile grid middleware allocated jobs to mobile resources by predicted mobile resource reliability. We implemented a simulation model that simplifies various functions of the proposed job scheduling model by using the DEVS (Discrete Event System Specification) which is the formalism for modeling and analyzing a general system. We also conducted diverse experiments for performance evaluation. Experimental results demonstrate that the proposed model can assist in improving the performance of mobile grid in comparison with existing job scheduling models.

• Journal of Korea Multimedia Society
• /
• v.9 no.9
• /
• pp.1107-1117
• /
• 2006

In this paper, a load balancing method using ring network structure in the Grid database is proposed. In the Grid database, generally, data is replicated for performance and availability. And, user's request is transferred to node and processed in that node which has target data. But, in such environment, a decline of performance can be occurred because unbalanced workload. A traditional research is proposed to solve unbalanced load problem. However, the Grid database has a number of systems and user's request always changes dynamically. Therefore, a traditional research can not be applied. The proposed method connects each node which has a same replicated data through ing network structure. If workload is overflowed in some node, user's request is transferred to a linked node which has a target data. And, this node stops another request processing until workload is decreased. Then, it changes the link structure through sending a message to a previous node, to stop request forwarding from a previous node. This paper shows a proposed method increases performance than existing research through performance evaluation and is more suitable for a complex and dynamic environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.225-233
• /
• 2010

Recently, in the field of Smart Grid, Smart Home Network, Ubiquitous Computing, etc. we have continued to study Smart Information Monitoring Technology(SIMT) which exchange, control and monitor information collected and processed by need in real-time and two-way. In this paper, we understand application products or recent trends of SIMT for Energy, U-Farm, Vehicle Information and Home Network. Specially, we explain Google PowerMeter which exchange information with Smart Meter of core part of the smart grid at real-time, Real-time Monitoring System(RMS) for U-Farm, RMS for vehicle status Information. we subscribe Smart Information Monitoring Technology application based on ZigBee of low price, low power or related work. Finally we subscribe actual proof construction situation of Jesu for smart grid.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.621-631
• /
• 2017

In this paper, we study the various impacts of connecting distributed generation (DG) to the distribution network. The comprehensive evaluation index system (CEIS) of four hierarchies is established, considering economy, reliability and voltage quality, and the calculation methods of different indexes are presented. This paper puts forward an improved triangular fuzzy number analytic hierarchy process (ITFNAHP) to weight the second level indexes (SLI) and the third level indexes (TLI), and calculates the variation coefficient to weight the fourth level indexes (FLI). We calculate the comprehensive weight coefficients based on the weight coefficients of the SLI, TLI and FLI, and then calculate the comprehensive evaluation of satisfaction (CES) of different access schemes. On the basis of the IEEE 33-bus example system, simulations of the calculation methods and the comprehensive evaluation method are carried out under different DG access schemes according to the same total investment cost and the same permeability, respectively, and the simulation results are analyzed and discussed.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.61-73
• /
• 2004

The efficiency of the real-time route guidance system(RGS) depends largely on the quality of route search algorithms. In this paper, we implement the coarse grid method(CGM) in mathematical programming for finding a good quality route of real-time RGS in large-scale networks. The proposed CGM examines coarser and wider networks as the search phase proceeds, in stead of searching the whole network at once. Naturally, we can significantly reduce computational efforts in terms of search time and memory requirement. We demonstrate the practical effectiveness of the proposed CGM with nationwide real road network simulation.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.274-284
• /
• 2016

The increasing penetration of distributed energy resources on the distribution networks have brought a number of technical impacts where voltage and thermal variations have been identified as the dominant effects. Active network management in distribution networks aims to integrate distributed energy resources with flexible network management so that distributed energy resources are organized to make better use of existing capacity and infrastructure. This paper propose active solutions which aims to solve the voltage and thermal issues in a distributed manner utilizing a collaborative approach. The proposed algorithms have been fully tested on a distribution network with distributed generation units.