• Journal of Internet Computing and Services
• /
• v.6 no.4
• /
• pp.115-124
• /
• 2005

The packet loss problem that occurs in the mobile multicast (MoM) protocol due to designated multicast service provider(DMSP) handoff is investigated through simulation experiments for several DMSP selection policies. Then, two enhanced DMSP schemes are proposed to minimize the packet loss of the MoM protocol with single DMSP. The first scheme uses a backup DMSP and greatly reduces the packet loss rate at the expense of the increased network traffic. The second scheme utilizes the extended DMSP operation and shows many desirable features such as the almost zero packet loss rate and relatively low network traffic.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.31-44
• /
• 2006

In a packet switching network, congestion is unavoidable and affects the quality of real-time traffic with such problems as delay and packet loss. Packet fair queuing (PFQ) algorithms are well-known solutions for quality-of-service (QoS) guarantee by packet scheduling. Our approach is different from previous algorithms in that it uses hardware time achieved by sampling a counter triggered by a periodic clock signal. This clock signal can be provided to all the modules of a routing system to get synchronization. In this architecture, a variant of the PFQ algorithm, called digitized delay queuing (DDQ), can be distributed on many line interface modules. We derive the delay bounds in a single processor system and in a distributed architecture. The definition of traffic contribution improves the simplicity of the mathematical models. The effect of different time between modules in a distributed architecture is the key idea for understanding the delay behavior of a routing system. The number of bins required for the DDQ algorithm is also derived to make the system configuration clear. The analytical models developed in this paper form the basis of improvement and application to a combined input and output queuing (CIOQ) router architecture for a higher speed QoS network.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.23-26
• /
• 2002

In this paper, we modelize several scheduling algorithms for real-time packet filtering tasks based on the multi-threaded multi-processor architecture for the network security system like the firewall and compare the performance of the algorithms by implementing the algorithms and doing a number of empirical tasks. As the matrices of the performance we use the idle factor and the packet transfer rate. We get the idle factors and the packet transfer rates according to the transfers of the packet sizes from 64 bytes to 1500 bytes.

• Journal of Communications and Networks
• /
• v.8 no.3
• /
• pp.297-305
• /
• 2006

High-rate wireless personal area network (HR-WPAN) has been standardized by the IEEE 802.15.3 task group (TG). To support multimedia services, the IEEE 802.15.3 TG adopts a time-slotted medium access control (MAC) protocol controlled by a central device. In the time division multiple access (TDMA)-based wireless packet networks, the packet scheduling algorithm plays a key role in quality of service (QoS) provisioning for multimedia services. In this paper, we propose an adaptive cross-layer packet scheduling method for the TDMA-based HR-WPAN. Physical channel conditions, MAC protocol, link layer status, random traffic arrival, and QoS requirement are taken into consideration by the proposed packet scheduling method. Performance evaluations are carried out through extensive simulations and significant performance enhancements are observed. Furthermore, the performance of the proposed scheme remains stable regardless of the variable system parameters such as the number of devices (DEVs) and delay bound.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.3
• /
• pp.381-392
• /
• 2007

In this paper, we present an analytical method for estimating the saturation throughput of an 802.11 ad hoc LAN in the presence of noise distorting transmitted frames. This is the first method that allows studying analytically the 802.11 network performance with consideration of correlated channel failures usually inherent to realistic wireless channels. With the study, we consider the possible packet fragmentation that can be adopted to reduce the performance degradation caused by noise-induced distortions. In addition to the throughput, our method allows estimating the probability of a packet rejection occurring when the number of packet transmission retries attains its limit. The obtained numerical results of investigating 802.11 LANs by the developed method are validated by simulation and show high estimation accuracy as well as the method efficiency in determining the optimal fragmentation threshold.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.5 s.335
• /
• pp.23-28
• /
• 2005

Recently, new concept, NP(Network Processor) was emerged into communication systems to cope with the various service requirements from Internet users. NP is an unique promising technique to capable of implementing of the packet processing in wire-speed and providing the flexibility for supporting the newly network services, having satisfied with implementation using hardware and software respectively in past, This paper deals with the implementation techniques and evaluation results of the line card capable to do packet forwarding function with packet processing power of wire-speed and applicable to various physical interfaces. There are several interfaces of POS, Gigabit ethernet and EPON in E-OLT(EPON Optical Line Terminal) system of PATH(Photonic Access To Home) network. Therefore, the E-OLT's packet forwarding engine have to support various subscriber's interface in wire speed. Our system is implemented the subscriber's card in daughter board and the setup procedure is done by system firmware based on the module's identifier acquired from installed physical board.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.414-418
• /
• 2003

VoIP is a core technology used to transmit both voice and data in an integrated packet' form. Within this technology, SIP is the signaling protocol used for 'real time' call services; particularly those where H323 is used. Yet, when considering the needs of mobile users, it is essential we integrate VoIp within the mobile technology so the mobile host is able to receive the 'packet' transported and by, and connected to, any available internet-address. For all this to occur, we need to improve Network Delay by reducing transmission problems associated with mobile services. If we are to obtain an optimal service then we must reduce any network delays which may arise from joining Mobile IP and VoIp services. This paper, therefore, considers how, unlike previous research, these delays may be improved through the use of the signaling technology\ulcorner SIP. It also considers how this research may be introduced into current wired and wireless integrated services enabling them to use the IP 'packet'.

• The Journal of the Korea Contents Association
• /
• v.8 no.6
• /
• pp.54-65
• /
• 2008

When DDoS attack is achieved, malicious host discovering is more difficult on wireless network than existing wired network environment. Specially, because wireless network is weak on wireless user authentication attack and packet spoofing attack, advanced technology should be studied in reply. Integrated Access Device (IAD) that support VoIP communication facility etc with wireless routing function recently is developed and is distributed widely. IAD is alternating facility that is offered in existent AP. Therefore, advanced traffic classification function and real time attack detection function should be offered in IAD on wireless network environment. System that is presented in this research collects client information of wireless network that connect to IAD using AirSensor. And proposed mechanism also offers function that collects the wireless client's attack packet to monitoring its legality. Also the proposed mechanism classifies and detect the attack packet with W-TMS system that was received to IAD. As a result, it was possible for us to use IAD on wireless network service stably.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.67-73
• /
• 2014

Due to the development of the communication technology and the high-performance mobile device, the number of video streaming service user has been increasing. Video streaming services in the restricted network environments need error control to support users for the Ultra High Definition(UHD) video delivery. Packet-level FEC method was used to control the error for delay-sensitive video service, but it has a defect in huge occupation of network resources by redundant packets. In this paper, we proposed a packet-level FEC algorithm which maintains the video quality by previous FEC methods and also reduces the occupation of network resource in the restricted network environments. The proposed algorithm controls the redundant rate with using the delivery characteristic of the video coding technology, and improves the efficiency of network resources by reducing the traffic by around 33% in comparison with the previous FEC methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.205-214
• /
• 2008

To transfer large amount of packets fast in sensor network, it is necessary that the delay between successive packet transmissions should be minimized as possible. In Sensor network, since the Operating Systems are worked on the event driven, the Timer Event is used to transfer packets successively. However, since the transferring time of packet completely is varies very much, it is very hard to set appropriate interval. If interval is too long, delay also becomes too long but if interval is too short, the fail of transfer request would increase. In this paper, we propose ESTEO which reduces the delay between successive packet transmissions by using SendDone Event which informs that a packet transmission has been completed. In ESTEO, the delay between successive packet transmissions is shortened very much since the transmission of next Packet starts at the time when the transmission of previous packet has completed, irrespective of the transmission time. Therefore ESTEO could provide high packet transmission rate given large amount of packets.