• Proceedings of the IEEK Conference
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.909-912
• /
• 1998

In this paper, a new connection admission controller using neural network is presented. The controller measures traffic flow, cell loss rate, and cell delay periodically. Using those measured information, it learns the distributions of traffics of each traffic. Also the proposed controller is able to measure and manage the delays that source traffics experience through the network by using DWRR multiplexer with buffers dedicated to each traffic source. Experimental result show that the heterogeneous traffic sources with various QoS requirement.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.94-97
• /
• 1999

In this paper, a new real-time neural network connection admission controller is proposed. The proposed controller measures traffic flows, cell loss rate and cell delay periodically each classes. The Neural network learns the relation between those measured information and service quality by real-time. Also the proposed controller uses the DWRR multiplexer with buffer dedicated to every traffic source in order to measure the delay that cells experience in buffer. Experimental result shows that the proposed method can control effectively heterogeneous traffic sources with diverse QoS requirement.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.20-22
• /
• 2000

The transmission networks are not perfect conductors and a percentage of the power generated is therefore lost before it reaches the loads. This network loss contributes to the cost of suppling power to consumers, and must be considered if the most efficient dispatch and location of generators and loads is to be achieved. In this paper, we propose an approximate calculation of marginal loss factors to analyze characteristics of regional transmission loss. These static marginal loss factors are approximately calculated based on the KEPCO's expected summer peak load data of year 2000.

• Journal of Communications and Networks
• /
• 제10권1호
• /
• pp.98-107
• /
• 2008

In mobile ad hoc networks, packet loss is unavoidable due to MAC contention, link failure or the inherent characteristics of wireless link. Since TCP relies on the timely reception of TCP ACK packets to progress the transmission of the TCP DATA packets, ACK loss obviously affects the performance due to two main problems: (a) Frequent occurrence of spurious retransmissions caused by timeout events and (b) impairment of the fast retransmit mechanism caused by the lack of a sufficient number of duplicate ACK packets. In particular, since most reactive routing protocols force the packets buffered over a path to be discarded while performing a route recovery, the performance degradation becomes more serious due to such ACK loss. In this paper, therefore, TCP with two piggybacking schemes (called TCP-pgy) is proposed in order to resolve the above-mentioned problems over reactive routing protocols. Through extensive simulations using the ns-2 simulator, we prove that our proposed schemes contribute to TCP performance improvements.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1043-1045
• /
• 2004

This paper deals with the core loss calculation of a BLDC motor made of Soft Magnetic Composite material. Since the teeth of motor partially have overhang in axial direction, 3 - dimensional equivalent magnetic circuit network (3D-EMCN) is used as an analytical method to get flux density of each element. The total core loss is calculated with the magnetic flux density and core loss curves of the SMC material. The calculated result is compared with core loss of the motor without overhang in stator teeth.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1055-1057
• /
• 2004

This paper deals with a qualitative analysis of iron loss in Transverse Flux Linear Motor (TFLM). 3D equivalent magnetic circuit network method (EMCNM) is used as an analytical method to get flux density of each element. The total core loss is calculated with the magnetic flux density and core loss curves of an optional material. The results of iron loss analysis can be used as a criterion to decide the manufactural shape such as lamination or solid type core, skew position, etc.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.45-51
• /
• 2009

In this paper, a transparency analysis and network-adaptive transport scheme are proposed in order to improve transparency of EBA-based force-reflecting teleoperation. EBA guarantees stability of force-reflecting teleoperation over network delay and loss but has limitation that it cannot overcome transparency deterioration of haptic interactions. The proposed transparency analysis quantifies the force feedback distortion caused by network delay and loss. Based on the analysis, the proposed haptic data synchronization and transmission rate control schemes adapt synchronization delay and transmission rate to current network state for more transparent haptic interaction. Through Matlab/Simulink simulations, it is confirmed that the proposed analysis provides an acceptable quantification method about haptic interaction quality and that the proposed haptic data transport scheme effectively improves haptic interaction quality with respect to network delays and losses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제3권4호
• /
• pp.274-279
• /
• 2002

ATM packet switching technologies for the purpose of the B-ISDN service are focused on high performance which represents good qualities on throughput, packet loss, and packet delay. ATM switch designs on a class of parallel interconnection network have been researched. But these are based on the self-routing function of it. It leads to conflict with each other, and to lose the packets. Therefore, this paper proposes the method based on Sort-Banyan network should be adopted for optimal routing algorithm. It is difficult to expect good hardware complexity. For good performance, a switch design based on the development of new routing algorithm is required. For the design of switch network, the packet distributor and multiplane are proposed. They prevent each packet from blocking as being transmitted selectively by two step distributed decision algorithm. This switch will be proved to be a good performance switch network that internal blocking caused from self-routing function is removed. Also, it is expected to minimize the packet loss and decrease the packet delay according to packet transmission.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• 제15권1호
• /
• pp.8-13
• /
• 2022

This paper investigates the method to implement a RF (Radio Frequency) energy harvesting sensor node and to build a sensor network using a CATV network and a leaky coaxial cable. The power supply of a sensor node is designed with the WPTS (Wireless Power Transfer System) receiver operating at 915MHz. A sensor network has limited coverage by the loss of RF signal at a wireless transmission link. The paper proposes to build a sensor network that the BLE signal of a sensor and the signal of a WPTS power transmitter are transmitted through a coaxial cable of a CATV network by utilizing WOC (WiFi over Coax) technology and radiates at a leaky coaxial cable. The length of a leaky coaxial cable and the total loss of a wire link are allowed to the point that the RSSI of a sensor node is more than the minimum value (-78dBm) and lead to extend wireless coverage.

• Journal of Korean Society of Water and Wastewater
• /
• 제34권3호
• /
• pp.221-230
• /
• 2020

In actual seawater desalination plant, the pressure loss due to frictional force of pipe is about 3~5 bar. Also, the pressure loss at pipe connection about 1~3 bar. Therefore, the total pressure loss in the pipe is expected to be about 4~8 bar, which translates into 0.111 to 0.222 kWh/㎥ of energy when converted into the Specific Energy Consumption(SEC). Reducing energy consumption is the most important factor in ensuring the economics of seawater desalination processes, but pressure loss in piping is often not considered in plant design. It is difficult to prevent pressure loss due to friction inside the pipe, but pressure loss at the pipe connection can be reduced by proper pipe design. In this study, seawater desalination plant piping analysis was performed using a commercial network program. The pressure loss and SEC for each case were calculated and compared by seawater desalination plant size.