• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.

• 한국경영과학회지
• /
• 제20권1호
• /
• pp.35-54
• /
• 1995

Routing in ATM network is set up by combination of both virtual path routing and virtual channel routing. While virtual channel is similar concept to virtual circuit of data networks, virtual path is a special concept which is not used in traditional data networks. Virtual path can rearrange in structure and size by simply changing virtual path routing tables and giving the network the capability to eash allocate network resources according to the demand needs. This paper provides reconfiguration models of virtual path network which give the bandwidth of link and the routing path for each traffic class. The reconfiguration models are network optimization problems of multicommodity network flow type. The numerical examples are also included.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.1609-1612
• /
• 2004

Ad hoc network is a kind of new wireless network paradigm for mobile hosts. Ad Hoc wireless networks consist of wireless mobile hosts forming a temporary network without the aid of any established infrastructure or centralized administration. Mobile hosts rely on each other to keep the network connected. Each host is not only mobile hosts but also router. So how to design a routing protocol is the most important problem. Dynamic source routing is a kind of routing protocol. In this paper we suggest a new automatic route shortening method and an energy-aware routing mechanism based on DSR.

• Journal of Communications and Networks
• /
• 제16권6호
• /
• pp.656-666
• /
• 2014

In delay tolerant networks (DTNs), delay is inevitable; thus, making better use of buffer space to maximize the packet delivery rate is more important than delay reduction. In DTNs, epidemic routing is a well-known routing protocol. However, epidemic routing is very sensitive to buffer size. Once the buffer size in nodes is insufficient, the performance of epidemic routing will be drastically reduced. In this paper, we propose a buffer scheme to optimize the performance of epidemic routing on the basis of the Lagrangian and dual problem models. By using the proposed optimal buffer scheme, the packet delivery rate in epidemic routing is considerably improved. Our simulation results show that epidemic routing with the proposed optimal buffer scheme outperforms the original epidemic routing in terms of packet delivery rate and average end-to-end delay. It is worth noting that the improved epidemic routing needs much less buffer size compared to that of the original epidemic routing for ensuring the same packet delivery rate. In particular, even though the buffer size is very small (e.g., 50), the packet delivery rate in epidemic routing with the proposed optimal buffer scheme is still 95.8%, which can satisfy general communication demand.

• ETRI Journal
• /
• 제44권5호
• /
• pp.733-745
• /
• 2022

In software-defined wireless networking (SDWN), the optimal routing technique is one of the effective solutions to improve its performance. This routing technique is done by many different methods, with the most common using integer linear programming problem (ILP), building optimal routing metrics. These methods often only focus on one routing objective, such as minimizing the packet blocking probability, minimizing end-to-end delay (EED), and maximizing network throughput. It is difficult to consider multiple objectives concurrently in a routing algorithm. In this paper, we investigate the application of machine learning to control routing in the SDWN. An intelligent routing algorithm is then proposed based on the machine learning to improve the network performance. The proposed algorithm can optimize multiple routing objectives. Our idea is to combine supervised learning (SL) and reinforcement learning (RL) methods to discover new routes. The SL is used to predict the performance metrics of the links, including EED quality of transmission (QoT), and packet blocking probability (PBP). The routing is done by the RL method. We use the Q-value in the fundamental equation of the RL to store the PBP, which is used for the aim of route selection. Concurrently, the learning rate coefficient is flexibly changed to determine the constraints of routing during learning. These constraints include QoT and EED. Our performance evaluations based on OMNeT++ have shown that the proposed algorithm has significantly improved the network performance in terms of the QoT, EED, packet delivery ratio, and network throughput compared with other well-known routing algorithms.

• Journal of information and communication convergence engineering
• /
• 제6권2호
• /
• pp.117-121
• /
• 2008

In ad hoc network, the scarce energy management of the mobile devices has become a critical issue in order to extend the network lifetime. Therefore, the energy consumption is important in the routing design, otherwise cluster schemes are efficient in energy conserving. For the above reasons, an Energy conserving Context aware Clustering algorithm (ECC) is proposed to establish the network clustering structure, and a routing algorithm is introduced to choose the Optimal Energy Routing Protocol (OERP) path in this paper. Because in ad hoc network, the topology, nodes residual energy and energy consuming rate are dynamic changing. The network system should react continuously and rapidly to the changing conditions, and make corresponding action according different conditions. So we use the context aware computing to actualize the cluster head node, the routing path choosing. In this paper, we consider a novel routing protocol using the cluster schemes to find the optimal energy routing path based on a special topology structure of Resilient Ontology Multicasting Routing Protocol (RODMRP). The RODMRP is one of the hierarchical ad hoc network structure which combines the advantage of the tree based and the mesh based network. This scheme divides the nodes in different level found on the node energy condition, and the clustering is established based on the levels. This protocol considered the residual energy of the nodes and the total consuming energy ratio on the routing path to get the energy efficiently routing. The proposed networks scheme could get better improve the awareness for data to achieve and performance on their clustering establishment and messages transmission. Also, by using the context aware computing, according to the condition and the rules defined, the sensor nodes could adjust their behaviors correspondingly to improve the network routing.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 한국컴퓨터종합학술대회 논문집 Vol.33 No.1 (D)
• /
• pp.136-138
• /
• 2006

The high-rate Wireless Personal Area Networks (WPANs) which IEEE 802.15.3 standard support, foster the Digital Home Network (DHN) scenarios with high rate multimedia data transmission. Actually, there are a few routing protocols for ad-hoc networks which considered the terminal location information and routing metric to reduce the energy consumption and optimize the routing path in mobile system. Based on other routing protocols, this paper presents the reliable location-based routing algorithm which is an adaptation to these networks.

• Journal of Communications and Networks
• /
• 제3권4호
• /
• pp.342-350
• /
• 2001

The Internet routing instability, or the rapid fluctuation of network reachability information, is an important problem currently facing the Internet engineering community. High levels of network instability can lead to packet loss, increased network latency, and delayed routing convergence. At the extreme, high levels of routing instability can lead to the loss of internal connectivity in wide-area networks. In this paper, we investigate the variation of domain degree and domain count of the inter-domain network over time by using linear regression model in order to analyze the topology variation of inter-domain network. We Also propose an efficient policy management model to reduce the instability in the inter-domain routing system. The proposed model can be used to identify whether a routing policy is adequate to reduce convergence time that is required to return to a normal state when BGP routing instability happens. Experimental analysis shows that the proposed model can be used to set up routing policy in domains for the purpose of minimizing the effects and the propagation of BGP routing instability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권4호
• /
• pp.1643-1660
• /
• 2016

Connectivity and trust in social networks have been exploited to propose applications on top of these networks, including routing, Sybil defenses, and anonymous communication systems. In these networks, and for such applications, connectivity ensures good performance of applications while trust is assumed to always hold, so as collaboration and good behavior are always guaranteed. In this paper, we study the impact of differential behavior of users on performance in typical social network-enabled routing applications. We classify users into either collaborative or rational (probabilistically collaborative) and study the impact of this classification and the associated behavior of users on the performance of such applications, including random walk-based routing, shortest path based routing, breadth-first-search based routing, and Dijkstra routing. By experimenting with real-world social network traces, we make several interesting observations. First, we show that some of the existing social graphs have high routing costs, demonstrating poor structure that prevents their use in such applications. Second, we study the factors that make probabilistically collaborative nodes important for the performance of the routing protocol within the entire network and demonstrate that the importance of these nodes stems from their topological features rather than their percentage of all the nodes within the network.

• Communications for Statistical Applications and Methods
• /
• 제10권3호
• /
• pp.795-804
• /
• 2003

In this article, a tomography for the estimation of the origin-destination(OD) traffic intensities in dynamic routing network is considered. Vardi(1996)'s approach based on fixed route is not directly applicable to dynamic routing protocols, which arises from the fact that we cannot access the route at every observation time. While it uses link-wise traffics as the observations, the proposed method considers the triple of ingress/outgress/relayed traffics data at each node so that we can transform the problem into a routing-independent tomography. An EM algorithm for implementation and some simulated experiments are provided.