• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.649-651
• /
• 2018

Since the ubiquitous sensor network is not connected to external power source and operated by its own battery, it is required to maximize the network life using the efficient energy utilization. In a conventional hop count based routing protocol, most sensor nodes are designed with a constant transmission power. In this paper, we propose a routing protocol that prolongs the network lifetime by balancing the power consumption among the nodes by controlling the transmit power according to the residual power of the nodes, and compared the performance of the proposed routing protocol through computer simulations.

• International journal of advanced smart convergence
• /
• v.5 no.1
• /
• pp.8-15
• /
• 2016

Studies have been made for the wireless sensor network protocols by a number of researchers to date. In particular, the studies as to the hierarchical protocol LEACH algorithm was concentrated. Various studies have been derived for the performance of the protocol is based on the LEACH protocol have been made. Improved algorithms have been proposed continuously. On the other hand, The performance comparison and evaluation of the improved algorithm is insufficient. Therefore, we compared the performance for the ML-LEACH (Multi Hop-Layered) and DL-LEACH (Dual Hop-Layered) been derived mainly LEACH. scalability, energy consumption, CH elected, network lifetime were selected as a Performance evaluation items.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11C
• /
• pp.1023-1029
• /
• 2006

In this Paper, we present a novel authentication and key exchange(AKE) protocol for inter-NSP(provider) roaming in IEEE 802.16e networks. The proposed protocol allows performing both user and device authentication jointly by using two different authentication credentials and Provides user anonymity and session key establishment. Also, this protocol requires only two round number message exchange between foreign network and home network.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1129-1132
• /
• 1999

This paper deals with the design and implementation of an Ethernet-based communication protocol to be used in PC-based I/O interface systems. Recently, the performance of PC systems is being highly improved and Ethernet is used as the stable communication network over the world. We develop a new protocol driver with the capability of accessing Ethernet directly using NDIS(Network Driver Interface Specification), the network interface standard of Windows O.S. in PC, and install it at the application layer of the protocol structure. Its major roles are the supplement of CSMA/CD algorithm, the effective use of the long data frame of Ethernet, and the real-time transmission of data frames. This paper represents the possibility of the real-time control network and systems based on PCs and Ethernet.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.649-657
• /
• 2013

DTN flooding based routing protocol replicate the message copy to increase the delivery like hood that overloads the network resources. The probabilistic routing protocols reduce replication cost by forwarding the message to a node that holds high predictability value to meet its destination. However, the network traffic converges to high probable nodes and produce congestion that triggers the drop of previously stored messages. In this paper, we have proposed a routing protocol called as Connection frequency Buffer Aware Routing Protocol (CFBARP) that uses an adaptive method to maintain the information about the available buffer space at the receiver before message transmission. Furthermore, a frequency based method has been employed to determine the connection recurrence among nodes. The proposed strategy has performed well in terms of reducing message drop, message relay while increases the delivery probability.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2212-2215
• /
• 2002

This dissertation suggests and implements a middle level network which is called PICNET-NP (Plant Implementation and Control Network for Nuclear Power Plant). PICNET-NP is based partly on IEEE 802.4 token-passing bus access method and partly on IEEE 802.3 physical layer. For this purpose a new interface a physical layer service translator, is introduced. A control network using this method is implemented and applied to a distributed real-time system. To verify the performance of proposed protocol experimental were carried out, and the following results are obtained. 1) proper initialization of the protocol. 2) normal receiving and transmission of data. 3) proper switching of transmission media in case of a fault condition on the one of transmission media. The proposed protocol exhibits the excellent performance in the experimental system. From the test results in the experimental system, the proposed protocol, PICNET-NP, can be used for the upgrading of a nuclear power plant and the distributed control system in the next generation of nuclear power plant.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.8
• /
• pp.709-716
• /
• 2005

As a way to build more efficient and intelligent container cranes for todays hub ports, communication networks are used to interconnect numerous sensors, actuators, controllers, and operator switches and consoles that are spatially distributed over a crane. Various signals such as sensor values and operator's commands are digitized and broadcast on the network instead of using separate wiring cables. This not only makes the design and manufacturing of a crane more efficient, but also easier implementation of intelligent control algorithms. This paper presents the performance evaluation of CAN(Controller Area Network), TTP(Time Triggered Protocol) and Byteflight that can be used for cranes. Through discrete event simulation, several important quantitative performance factors such as the probability of a transmission failure, average system delay (data latency) and maximum system delay have been evaluated.

• The Journal of Engineering Research
• /
• v.7 no.1
• /
• pp.37-51
• /
• 2005

An and hoc network is a collection of wireless mobile nodes forming a temporary network without the centralized administration. Due to the limited transmission range of wireless work interface, multiple networks "hops" maybe needed for one node to exchange data with adjacent node. In recent years, a variety of new routing protocol about ad hoc network was developed. This paper presents a new routing protocol based on the Dynamic Source Routing which is not suitable for the high mobility ad hoc network. The Enhanced DR adapts quickly to routing changes when node movement is frequent. When a trunk route is broken, this protocol will utilize the alternative route saved in the route to discovery quickly the new route. It improves the performance of the existing DSR algorithm, so that the negative impacts from weakness of DSR are reduced.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.163-175
• /
• 1999

As the size and complexity of network increase, Distributed Systems Management (DSM) will be significant issue within information network in order to increase the high reliability and to improve the flexibility of network management. The OSI management model has several problems. The key problems are that it does not fully address the problems of how to develop communication protocol in support of DSM, and how to classify the management connection criteria. In this paper, to solve first problem described above, this paper propose the connectionless CMIP(Common Management Information Protocol) to accomplish for effectively managing the distributed management system, and indicate its efficiency; this protocol is available to negotiate among the managing systems, handle the dynamic information. To work out second problem, we introduce the connection criteria in the hierarchy of management systems, and finally evaluate the efficiency of a suggested protocol during cooperative negotiation among the managing systems.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.8
• /
• pp.23-28
• /
• 2015

TPSN(Timing-sync Protocol for Sensor Networks), the representative of time synchronization protocol for WSN(wireless sensor networks), was developed to provide higher synchronization accuracy and energy efficiency. So, TPSN's approach has been referenced by so many other WSN synchronization schemes till now. However, TPSN has a collision problem due to simultaneous transmission among competing nodes, which causes more network convergence delay for a network-wide synchronization. A Polling-based scheme for TPSN is proposed in this paper. The proposed scheme not only shortens network-wide synchronization time of TPSN, but also reduce collision traffic which lead to needless power consumption. The proposed scheme's performance has been evaluated and compared with an original scheme by simulation. The results are shown to be better than the original algorithm used in TPSN.