• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2463-2482
• /
• 2016

Cloud services are often provisioned to their customers using user-friendly web browsers with flexible and rich plug-in environments. Delay is one of the fundamental performance metrics of these web-based services. Commonly-used network measurement tools usually only measure network delay and it may be difficult to infer the web-delay performance using only network layer measurement approaches. In this paper, we propose to evaluate the application layer delay in a browser-based network measurement platform using engineered scripts. We conducted a delay measurement study using instrumented scripts in the proposed browser-based measurement platform. Our investigation included a comparison study of three browser-scripting delay measurement methods, including Java applet, JSP and Flash ActionScript. We developed a browser-based delay measurement testbed over the Internet so that different delay measurement tools could be evaluated in the same real network environment including typical Internet paths and the Baidu cloud. We also decomposed the components of the end-to-end delay process of the above measurements to reveal the difference and relationship between the network-layer delay and the application-layer delay. Our measurement results characterize the stochastic properties of the application-layer delay over real Internet paths, and how these properties vary from the underlying network layer delay. This browser-scripting measurement approach can be easily deployed on different cloud service platforms to inspect their application-layer delay performance between end clients and the cloud platforms. Our measurement results may provide insights into designing new cloud services with enhanced quality-of-experience perceived by cloud users.

• Journal of Scientific & Technological Knowledge Infrastructure
• /
• s.7
• /
• pp.134-140
• /
• 2001

To know about the performance of KREONET, we installed an active network performance measurement tool, PingER. For customization, we modified its architecture and some codes. Although this customization is a minor change of PingER, it gives much benefit and convenience for both operators and users. Using PingER, we can measure the effect of the STAR TAP link. The new networking through the link is a little bit slower than the previous networking. But the new link shows far fewer packet losses and provides more reliable networking.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.28-32
• /
• 2007

This research proposed that development of wireless condition monitoring system using WLAN network. It offers the prospect of improved performance that removed a current a coaxial cable and reduced overall cost of condition monitoring. Recently, there is an interesting concern for wireless system as an infrastructure technology construct ubiquitous computing environment in the future. High performance computing board makes minimization with integrate of a various functions which support wireless LAN network. Instead of wired coaxial cable using measurement system in industry, wireless LAN network assists industry automation and engineer's convenience. Developed system adapted wireless LAN network on shipboard with engine room and deck house, it also executes wireless measurement test on 8500TEU containership.

• Convergence Security Journal
• /
• v.12 no.6
• /
• pp.11-17
• /
• 2012

Network security performance evaluation is a complex and diverse system environments, a single, specific performance measurements alone performance evaluation measure itself and the meaning of the reliability of the evaluation results do not limit the number of days only. In this paper, we propose a method to measure the security features of security, QoS measurement techniques using MOS satisfaction. MOS(Mean Opinion Score) Rating specifications for network security, QoS satisfaction and how to operate the development and operational model for future customer's satisfaction for information systems that can be used to evaluate the QoS measurement/analysis be utilized in the field. Objectified in the form of standards and performance measurement system provider (supplier development) and consumers(users) all the results available so that how to develop a system. Development is the development of information security features, the performance of these two features networking capabilities and a comprehensive evaluation of a three-gaeyoungyeok Correlating performance measurement methodology. Systematic measurement environment designed using the proposed methodology of this study, when the operating system is on the satisfaction of the security, QoS can be calculated. Forward In addition, a variety of performance metrics and performance measurement methods by extending the network security system satisfaction rating upgrade by the way will be.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2533-2540
• /
• 2009

Performance of processing protocols is one most important goal in a network or systems constituting the network. Measurement of performance, thus, is an essential element to not only establish the network but also develop systems. A projection in vector mathematics is the transformation of points and lines in one plane onto another plane by connecting corresponding points on the two planes with parallel lines. This is a method, as an application of vector mathematics, which is widely used in engineering as well to consider elements dedicated to the measurement object. This paper proposes a sound methodology for measuring the performance of the SIP protocol, which is based on the projection. The SIP protocol is a typical standard protocol for call-processing in the internet telephony of Next Generation Convergence Network. Owing to use the projected protocol which excludes unnecessary operation paths, the methodology can be effective in implementation and resource utilization. This paper also presents a process based on the proposed methodology to measure the performance of a SIP proxy server.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1324-1327
• /
• 2009

Social infrastructure is the basis of public welfare and should be recognized and managed as important assets. Bridge is one of the most important infrastructures to be managed systematically because the impact of the failure is critical. It is essential to monitor the performance of bridges in order to manage them as an asset. But current analytical methods such as predictive modeling and structural analysis are very complicated and difficult to use in practice. To apply these methods, structural and material condition data collection should be performed in each element of bridge. But it is difficult to collect these detailed data in large numbers and various kinds of bridges. Therefore, it is necessary to collect data of major measurement items and predict the life of bridges roughly with advanced information technologies. When certain measurement items reach predefined limits in the monitoring bridges, precise performance measurement will be done by detailed site measurement. This paper describes the selection of major measurement items that can represent the tendency of bridge life and introduces automated bridge data collection test-bed using wireless sensor network technology. The following will be major parts of this paper: 1) Examining the features of conventional bridge management system and data collection method 2) Mileage concept as a bridge life indicator and measuring method of the indicator 3) Test-bed of automated and real-time based bridge life indicator monitoring system using wireless sensor network

• Journal of Information Technology Services
• /
• v.11 no.1
• /
• pp.239-246
• /
• 2012

The user increases around the WiBro and in which the mobile broad band service is the wireless internet base technology HSDPA, that is the cellular phone foundation technique, and moreover the issue about the user effective quality guarantee emerges but the quality control of the wireless network is the incomplete actual condition. Therefore, the reliability verification according to the development of the system for the performance measure for the continued wireless data service and it and evaluation are needed for the quality control. In this paper, the wireless data service quality measurement system was implemented with the design. The same test environment as the existing network performance measurement program was built for the reliability verification of the embodied device for measuring quality and evaluation and the cost performance was performed. It could confirm that design and embodied wireless data service quality measurement system operated accurately in this paper through the quality measure result value analysis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.2
• /
• pp.221-232
• /
• 1999

This study investigates the applicability and design scheme of fieldbus network in the measurement system used for precise and safe construction as well as efficient maintenance of bridges. In order to maximize the function and performance of bridge monitoring system, this study introduces the CAN(Controller Area Network), one of the fieldbus protocols, in the measurement system of bridges. This study presents the implementation method of CAN on the monitoring system of bridge, and also proposes a bandwidth allocation scheme for the design of network. The validity of the proposed CAN design method is verified through a simulation experiment. It is shown that the CAN can be readily applicable to the measurement system of bridges.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1887-1891
• /
• 2008

In this paper, we dealt with a partial discharge (PD) measurement method that has been accepted as an effective and non-destructive technique to estimate insulation performance of low-voltage induction motors. The PD measurement system consists of a coupling network, a low noise amplifier, and associated electronics. A shielded box was used to reduce environmental noise. Frequency characteristic of the coupling network was estimated by a sinusoidal signal input, and the low cut-off frequency of the coupling network was 1 MHz (-3 dB). Also, we carried out a calibration test for the PD measurement system. Sensitivity of the system was of 84 m$V_{max}$/pC between stator winding and enclosure. In application test on a low-voltage three phase induction motor (5 HP), we could detect 88 pC at AC 800 $V_{max}$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5948-5971
• /
• 2019

Estimating loss rates with the packet traces captured from some point in the middle of the network has received much attention within the research community. Meanwhile, existing intermediate-point methods like [1] require the capturing system to capture all the TCP traffic that crosses the border of an access network (typically Gigabit network) destined to or coming from the Internet. However, limited to the performance of current hardware and software, capturing network traffic in a Gigabit environment is still a challenging task. The uncaptured packets will affect the total number of captured packets and the estimated number of packet losses, which eventually affects the accuracy of the estimated loss rate. Therefore, to obtain more accurate loss rate, a method of strengthening packet loss measurement from the network intermediate point is proposed in this paper. Through constructing a series of heuristic rules and leveraging the binomial distribution principle, the proposed method realizes the compensation for the estimated loss rate. Also, experiment results show that although there is no increase in the proportion of accurate estimates, the compensation makes the majority of estimates closer to the accurate ones.