• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1469-1476
• /
• 2015

The bridges take a significant part of entire route in Korea railway, because 70% of Korean territory is covered with mountains. For this reason, span enlargement of railway bridges is more advantageous to increase economic efficiency on the bridge design. However there are many limitations such as additional axial force of the rail, excessive displacement due to track-bridge interaction. In this study, track-bridge interaction analysis was conducted considering the sliding layer which was installed between the track and girder. From the numerical analysis results, the behavior of track-bridge interaction was investigated according to the installation method of sliding layer. Finally, a guideline for development of track-bridge structure system to reduce the track-bridge interaction was proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2195-2200
• /
• 2008

The use of WLAN technology specially 802.11 b and g has seen huge subscriber growth in a relatively short time period due to low cost and ease of installation of WLAN hardware. These technologies provide multiple data rates ranging from 1 to 54 Mbps depending on modulation used in physical layer. This paper presents the performance of 802.11b and g under different data rates in mobile IPv4 environment. OPNET is used in the study as the network simulator. The performance metrics used in this wort is data traffic received by a WLAN station roaming amongst Access Point(AP) of different ESSs. It is found that much data packets are lost during handover between mobile agents. The traffic received by the roaming station varies based on the data rates provided by two different WLAN technologies.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.61-62
• /
• 2014

With the introduction of the Cloud Computing, the IT Support organization is facing a new organizational challenge. Especially, the PaaS(Platform as a Service) cloud provisions all of the servers, the network, the storage, the OS, and the middleware installation & configurations without the IT subject experts. This change requires the researches on the new role of the IT Support staff, the collaboration among the skill groups, the conflicts between the IT Support and the Line of Business. But there is no study on this perspective. Hence this paper will study the negative forces against the adoption of the PaaS and the associated organizational changes. This finding can help the IT organization define the new organization structure and the skill set to easy the conflicts, and prepare the transformation for the PaaS adoption.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.82-85
• /
• 2014

With high speed communication network and supplement of high quality multimedia devices, large demand of multimedia service stimulates digital signing industry to step forward to new opportunities. But in order to provide competitive quality services, Integrated management system is required. Digital signs use technologies such as LCD, LED and Projection to display content such as digital images, video, streaming media, and information. Digital signs rely on a variety of hardware to deliver the contents. The components of a typical digital sign installation include one or more display screens, one or more media players, and a content management server for each player. To improve the existing high cost and less efficient management system, this paper suggest cost effective Integrated Digital Signage Management System with the results of analysis of existing system. Also this paper presents an actual implementation on entertainment company to evaluate the suitability, to prove the result of superior performance of proposed system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.219-224
• /
• 2019

The number of solar power installation companies including domestic small scale (50kW or less) is increasing rapidly, but the efficient operation system and management are insufficient. Therefore, a new type of operating system is needed as a maintenance management aspect to maximize the generation amount in the current state rather than the additional function which causes the increase of the generation cost. In this paper, we utilize Big Data and sensor network to maximize the operating efficiency of solar power plant and analyze the expert system to develop power generation prediction technology, module unit fault detection technology, life prediction of inverter components and report technology, maintenance optimization And to develop a smart monitoring system that enables optimal operation of photovoltaic power plants such as development of algorithms and economic analysis.

• Journal of the Korean Society for Library and Information Science
• /
• v.55 no.1
• /
• pp.343-364
• /
• 2021

In this study, as examples of domestic libraries currently using the cloud-based library system, the main characteristics and issues that appeared in the experience of use divided into the processes of introduction, conversion, and operation of each system were investigated, and the results are as follows. First, it is said that new systems were introduced as alternatives to problems caused by the operation of the existing system, and the current products were selected because they were cost-effective. Second, the main issues in the conversion process were data migration work, implementation of existing service functions, and linking problems of internal and external systems in the library. Third, the main advantages identified in the operation process were cost reduction, simple installation and automatic management and maintenance, and convenient use in mobile devices. The main drawbacks were the difficulty of customizing that reflects the characteristics of the library, and the need for stability of the network. The disappeared role of the information technology librarian is the regular system inspection and maintenance support, and various new roles have been suggested. The responses of librarians and users to the new system were generally satisfied rather than dissatisfied.

• International journal of advanced smart convergence
• /
• v.12 no.3
• /
• pp.1-12
• /
• 2023

A public address (PA) system installed in a building is a system that delivers alerts, announcements, instructions, etc. in an emergency or disaster situation. As for the products used in PA systems, with the development of information and communication technology, PA products with various functions have been introduced to the market. PA systems recently launched in the market may be connected through a single network to enable efficient management and operation, or use voice recognition technology to deliver quick information in case of an emergency. In addition, a system capable of locating a user inside a building using a location-based service and guiding or responding to a safe area in the event of an emergency is being launched on the market. However, the new PA systems currently on the market add some functions to the existing PA system configuration to make system operation more convenient, but they do not change the complex PA system configuration to reduce facility costs, maintenance, and management costs. In this paper, we propose a novel PA system configuration for buildings using audio networks and control hierarchy over peer-to-peer (Anchor) technology based on audio over IP (AoIP), which simplifies the complex PA system configuration and enables convenient operation and management. As a result of the study, through the emergency signal processing algorithm, fire broadcasting was made possible according to the detection of the existence of a fire signal in the Anchor system. In addition, the control device of the PA system was replaced with software to reduce the equipment installation cost, and the PA system configuration was simplified. In the future, it is expected that the PA system using Anchor technology will become the standard for PA facilities.

• Korean Journal of Social Welfare Studies
• /
• v.40 no.2
• /
• pp.89-122
• /
• 2009

This study was carried out to analyze the job of care managers in their social welfare practicing fields about the frequency of care management duties they perform, types of duties considered to be most important and the reason, and types of jobs counted to be the most difficult and the reason by qualitative case study research methods. The job area of care management was elicited using DACUM method, and those 9 job areas derived from it were analysed according to frequency of performance, importance and difficulty. The subjects were 10 social workers serving more than 3 years with major duty of care management and chosen by reputational-case selection, and those collected data analysis was operated according to embedded analysis types. We discussed the implication of this research. : The experience of participants are the process of maintaining the tension, and search the equilibrium point between client centered service and institutional pressure. According to the results we proposed ① Construction of community based social work network, ② Institutional installation for guarantee care manager's Job competence ③ Standard manual for equilibrium and upward equalization

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.4
• /
• pp.17-24
• /
• 2022

This study aims to identify the Spatial Changes and the main agent of space creation in Samrye Area during the Japanese Occupation Period. As for the urban space in the Samrye area, the urban space was expanded to the Hujeong-ri area from the construction of the Jeonbuk light railway. Before 1914, the urban space of Samrye was formed around Samrye Station in Samrye-ri, which oversees Samrye-do from the Goryeo Dynasty to the Joseon Dynasty, but when Samrye Station of Jeonbuk light railway was established in Hujeong-ri in 1914, the foundation of a ladder-type street network visible from the central space of the current Samrye area was formed until the 1930s. And it was the Japanese and Korean landowners who took the lead in the construction of the Jeonbuk light railway, not the government, who expanded the urban space of Samnye from Samrye-ri to Hujeong-ri. The background of the establishment of Jeonbuk light railway is the reason why Dongsan Farm has difficulty in transporting rice to the Honam Line during the rice harvest. At that time, Park Ki-soon, famous as the land king, took charge of the established chairman of the railroad installation and established it, and with the establishment of Samrye Station, the access road was connected to his farm. In addition, a new road was built on the farm land that owned the Hujeong-ri area to the Seoul-Mokpo Interroad in Samrye-ri, thereby expanding the urban space. In other words, unlike Gunsan and Iksan, which were built under the leadership of the Japanese colonial eran government, the urban space in Samrye area was expanded by a farmer who grew up as a large landowner based on agriculture, which was the economic base at the time.

• Smart Structures and Systems
• /
• v.31 no.5
• /
• pp.469-483
• /
• 2023

The dynamic characteristics of wind turbine blades are usually monitored by contact sensors with the disadvantages of high cost, difficult installation, easy damage to the structure, and difficult signal transmission. In view of the above problems, based on computer vision technology and the improved YOLOv5 (You Only Look Once v5) deep learning model, a non-contact dynamic characteristic monitoring method for wind turbine blade is proposed. First, the original YOLOv5l model of the CSP (Cross Stage Partial) structure is improved by introducing the CSP2_2 structure, which reduce the number of residual components to better the network training speed. On this basis, combined with the Deep sort algorithm, the accuracy of structural displacement monitoring is mended. Secondly, for the disadvantage that the deep learning sample dataset is difficult to collect, the blender software is used to model the wind turbine structure with conditions, illuminations and other practical engineering similar environments changed. In addition, incorporated with the image expansion technology, a modeling-based dataset augmentation method is proposed. Finally, the feasibility of the proposed algorithm is verified by experiments followed by the analytical procedure about the influence of YOLOv5 models, lighting conditions and angles on the recognition results. The results show that the improved YOLOv5 deep learning model not only perform well compared with many other YOLOv5 models, but also has high accuracy in vibration monitoring in different environments. The method can accurately identify the dynamic characteristics of wind turbine blades, and therefore can provide a reference for evaluating the condition of wind turbine blades.