• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.1859-1864
• /
• 2011

Two lanthanide complexes, $[Ln(NO_3)_2(H_2O)_3(L)_2](NO_3)(H_2O)$ {Ln = Eu (1), Tb (2); L = 2-(4-pyridylium)-ethanesulfonate, $(4-pyH)^+-CH_2CH_2-SO_3^-)$}, were prepared from lanthanide nitrate and 4-pyridineethanesulfonic acid in $H_2O$ under microwave-heating conditions. Complexes 1 and 2 are isostructural, and the lanthanide metal in both complexes is coordinated to nine oxygen atoms. The pyridyl nitrogen in the ligand is protonated to give a zwitter ion that possesses an $NH^+$ (pyridyl) positive end and an $SO_3^-$ negative end. All O-H and N-H hydrogen atoms participate in hydrogen bonds to generate a two-dimensional (complex 1) or a three-dimensional network (complex 2). Complex 1 exhibits an intense red emission, whereas complex 2 exhibits an intense green emission in the solid state at room temperature.

• Mass Spectrometry Letters
• /
• v.9 no.3
• /
• pp.81-85
• /
• 2018

In this study, the chemical composition of bacterial melanin isolated from the Streptomyces glaucescens strain was elucidated by ultra-high-resolution Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry. Ultra-high-resolution mass profiles of the microbial melanin product were acquired using a 15 Tesla FT-ICR mass spectrometer in positive and negative ion modes via electrospray ionization to obtain more complete descriptions of the molecular compositions of melanin-derived organic constituents. A mass resolving power of 500,000 (at m/z 400) was achieved for all spectra while collecting 400 scans per sample with a 4 M transient. The results of this analysis revealed that the melanin pigment isolated from S. glaucescens predominantly exhibits CHON and CHO species, which belong to the proteins class of compounds, with the mean C/O and C/N ratios of 4.3 and 13.1, thus suggesting that the melanin could be eumelanin. This analytical approach could be utilized to investigate the molecular compositions of a variety of natural or synthetic melanins. The compositional features of melanins are important for understanding their formation mechanisms and physico-chemical properties.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.5
• /
• pp.229-232
• /
• 2005

Direct characterization of band alignment at chemical bath deposition $(CBD)-CdS/Cu_{0.93}(In_{1-x}Ga_x)Se_2$ has been carried out by photoemission spectroscopy (PES) and inverse photoemission spectroscopy (IPES). Ar ion beam etching at the condition of the low ion kinetic energy of 400 eV yields a removal of surface contamination as well as successful development of intrinsic feature of each layer and the interfaces. Especially interior regions of the wide gap CIGS layers with a band gap of $1.4\~1.6\;eV$ were successfully exposed. IPES spectra revealed that conduction band offset (CBO) at the interface region over the wide gap CIGS of x = 0.60 and 0.75 was negative, where the conduction band minimum of CdS was lower than that of CIGS. It was also observed that an energy spacing between conduction band minimum (CBM) of CdS layer and valance band maximum (VBM) of $Cu_{0.93}(In_{0.25}Ga_{0.75})Se_2$ layer at interface region was no wider than that of the interface over the $Cu_{0.93}(In_{0.60}Ga_{0.40})Se_2$ layer.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.473-478
• /
• 2007

Antibiotic composite was synthesized by coprecipitation of silver nitrate into hydroxyapatite. Adsorbed amount of silver ion was examined by the variation of concentration of silver nitrate, temperature, pressure and curing time. Optimum condition for silver-hydroxyapatite adsorption could be achieved. Physical and chemical characteristic properties of synthesized silver-hydroxyapatite were tested by ICP-MS, SEM-EDAX, DSC and XRD. Antibiotic properties for gram positive staphylococcus aureus (ATCC 6538) and gram negative escherichia coli (ATCC 25922) were tested by shake flake method.

• Journal of Life Science
• /
• v.8 no.2
• /
• pp.216-225
• /
• 1998

Metal ion-induced and it’s regulatory genes were screened in virulent salmonella typhimurium UK1 and tested cross-regulation with various stresses. Using the techniqud of P22-MudJ(Km, lacZ)-directed lacZ operon fusion, LF40 cuiA::MudJ and Lf153 cuiD::MudJ which were induced by copper were selected. cuia and cuiD were determined anaerobic coper inducible and copper tolerance response gene, respectively. Also cuiA and cuiD locus were determined at 81 and 8min, respectively, on salmonella Genetic Map. The two regulators were identified as cuaR, and cudR, which controls cuiA and cuiD, respectively. cuaR, and cudR appeared as negative regulators because the expression of cuiA-lac-Z and cuiD-lacZ were increased. Copper adapted UK1 showed high resistance to H$_{2}$O$_{2}$, but cuiD did not. The product of the cudR locus was responsible for decreasing the tolerance to copper and H$_{2}$O$_{2}$. Furthemore cuiA and cuiD locus were found to be part of a regulon under the control of a trans-acting regulators, rpoS, oxyR and relA. Therefore, the results suggest CTR participate with oxidative stress on Salmonella.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.6
• /
• pp.229-233
• /
• 2007

In this study, we carried out an investigation of the etching characteristics(etch rate, selectivity) of $HfO_2$ thin films in the $CH_4/Ar$ inductively coupled plasma. It was found that variations of input power and negative dc-bias voltage are investigated by the monotonic changes of the $HfO_2$ etch rate as it generally expected from the corresponding variations of plasma parameters. At the same time, a change in either gas pressure or in gas mixing ratio result in non-monotonic etch rate that reaches a maximum at 2 Pa and for $CH_4(20%)/Ar(80%)$ gas mixture, respectively. The X-ray photoelectron spectroscopy analysis showed an efficient destruction of the oxide bonds by the ion bombardment as well as showed an accumulation of low volatile reaction products on the etched surface. Based on these data, the ion-assisted chemical reaction was proposed as the main etch mechanism for the $CH_4-containing$ plasmas.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.2
• /
• pp.148-154
• /
• 2003

Short ($\tau$=40 $mutextrm{s}$) and high-voltage ($U_{sub}$=2~8 kV) negative substrate bias pulses were used to assist pulsed magnetron sputtering DLC films deposition. Space- and time-resolved probe measurements of the plasma characteristics have been performed. It was shown that in case of high-voltage substrate bias spatial non-uniformity of the magnetron discharge plasma density greatly affected DLC deposition process. By Raman spectroscopy it was found that maximum percentage of s $p^3$-bonded carbon atoms (40 ~ 50%) in the coating was attained at energy $E_{c}$ ~700 eV per deposited carbon atom. Despite rather low diamond-like phase content these coatings are characterized by good adhesion due to ion mixing promoted by high acceleration voltage. Short duration of the bias pulses is also important to prevent electric breakdowns of insulating DLC film during its growth.wth.

• Journal of Powder Materials
• /
• v.15 no.6
• /
• pp.450-457
• /
• 2008

The objectives of this study were the development of a synthesis technique for highly active nanosized ITO powder and the understanding of the reaction mechanisms of the ITO precursors. The precipitation and agglomeration phenomena in ITO and $In_{2}O_{3}$ precursors are very sensitive to reaction temperature, pH, and coexisting ion species. Excessive $Cl^-$ ion and $Sn^{+4}$ ions had a negative effect an synthesizing highly active powders. However, with a relevant stabilizing treatment the shape and size of ITO and $In_{2}O_{3}$ precursors could be controlled and high density sintered products of ITO were obtained. By applying the reprecipitation process (or stabilization technique), highly active ITO and $In_{2}O_{3}$ powders were synthesized. Sintering these powders at $1500^{\circ}C$ for 5 hours produced 97% dense ITO bodies.

• Journal of the Korean Chemical Society
• /
• v.57 no.6
• /
• pp.712-720
• /
• 2013

Microwave assisted syntheses of Zn(II), Cd(II) and Hg(II) complexes with 3-aminopyridine (3AP) and nitrite ($NO_2{^-}$) ions have been reported. The metal complexes were characterized by elemental analyses, molar conductance, IR, Far-IR, electronic, NMR ($^1H$, $^{13}C$), thermal and electron impact mass spectral studies. The spectroscopic studies reveal the composition, the nature of nitrite ligand in the complexes, electronic transitions, chemical environments of C and H atoms thermal degradation of the complexes. On the basis of characterization data, distorted tetrahedral geometry is suggested for Zn(II), Cd(II) and Hg(II) complexes. The organic ligand (3AP) and their metal complexes were screened against gram negative pathogenic bacteria and fungi in vitro. The results are compared with our previous report J. Korean Chem. Soc. 2013, 57, 341 on 4-aminopyridine and nitrite ion complexes of the same metal ions.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.781-785
• /
• 1998

Material and electrochemical characteristics of petroleum coke of the nongraphitic carbon prepated with attrition milling for 6~48 hours and heat-treatment at $700^{\circ}C$ for 1 hour was investigated. The milling condition affects the particle size distribution, BET specific surface area and interlayer distance of petroleum cokes. Carbon electrode with petroleum cokes prepared at the milling time of 12~24 hours and having average particle size of $6{\sim}8{\mu}m$ showed best electrochemical characteristics form the investigation of cyclic voltammogram and charge-discharge characteristics.