• 한국통신학회논문지
• /
• 제32권7B호
• /
• pp.403-410
• /
• 2007

IPv6 유무선 로컬 네트워크에서 이웃하는 호스트와 라우터를 발견하기 위한 목적으로 ND (Neighbor Discovery) 프로토콜이 제안되었다. 그러나 ND 프로토콜은 악의 있는 사용자가 프로토콜 메시지를 위조하여 정상적인 호스트나 라우터로 위장하는 것이 가능하기 때문에 네트워크 공격에 취약한 문제를 가지고 있다. ND 프로토콜을 보호하기 위한 목적으로 SEND (Secure Neighbor Discovery) 프로토콜이 제안되었다. SEND 프로토콜은 주소 소유권 증명, 메시지 보호, 재현 공격 방지, 그리고 라우터 인증 메커니즘을 제공한다. 본 논문에서는 IPv6 네트워크상에서 핵심적으로 운용될 프로토콜중의 하나인 SEND 프로토콜을 설계 및 구현하다. 또한 본 논문에서 구현한 SEND 프로토콜을 IPv6 네트워크상에서 실험함으로써 SEND 프로토콜의 공격 방어 능력과 프로토콜의 성능을 평가하고 분석한다.

• 한국분말재료학회지
• /
• 제23권6호
• /
• pp.447-452
• /
• 2016

Neodymium-iron-boron (Nd-Fe-B) sintered magnets have excellent magnetic properties such as the remanence, coercive force, and the maximum energy product compared to other hard magnetic materials. The coercive force of Nd-Fe-B sintered magnets is improved by the addition of heavy rare earth elements such as dysprosium and terbium instead of neodymium. Then, the magnetocrystalline anisotropy of Nd-Fe-B sintered magnets increases. However, additional elements have increased the production cost of Nd-Fe-B sintered magnets. Hence, a study on the control of the microstructure of Nd-Fe-B magnets is being conducted. As the coercive force of magnets improves, the grain size of the $Nd_2Fe_{14}B$ grain is close to 300 nm because they are nucleation-type magnets. In this study, fine particles of Nd-Fe-B are prepared with various grinding energies in the pulverization process used for preparing sintered magnets, and the microstructure and magnetic properties of the magnets are investigated.

• 한국진공학회지
• /
• 제10권2호
• /
• pp.201-206
• /
• 2001

본 연구에서는 RF 마그네트론 스퍼터링 방법을 이용하여 저탄소강 기판에 증착시킨 Fe-Ni계 합금 박막의 집합조직 발달을 조사하였다. Fe-Ni 합금 조성은 산업적 응용을 고려하여 인바합금(Invar alloy, Fe-36.5 wt%Ni)과 퍼멀로이(Permalloy, Fe-81 wt%Ni) 두 종류로 선택하였고, 증착시간을 변수로 제작하였다. 이들 합금 박막의 집합조직은 박막에서 전형적으로 나타나는 섬유집합조직(fibre texture)의 형태로 발달하였다. 인바합금 박막에서는 증착 초기에 <110>//ND 섬유집합조직이 발달하지만 증착시간이 증가함에따라 <210>//ND 섬유집합조직으로 변화하였다. 퍼멀로이 박막은 증착초기에 <221>//ND+<311>//ND의 혼합 집합조직을 나타내며 증착시간의 증가와 함께 <210>//ND 섬유집합조직으로 변화하였다. 이러한 집합조직의 변화를 박막의 미세조직의 진화와의 연관성이란 측면에서 고찰하였다.

• 한국분말재료학회지
• /
• 제17권1호
• /
• pp.1-6
• /
• 2010

In this study, a convergent heat treatment was performed in certain temperature regions in order to control the microstructures of Nd-rich phases and to reduce thermal stress on grain boundaries which could be caused during expansion and shrinkage of Nd-rich and $Nd_2Fe_{14}B$ phases. The difference of thermal expansion coefficient between $Nd_2Fe_{14}B$ and Nd-rich phases is the mechanism for convergent heat treatment. The Nd-rich phases which were located in junctions could penetrate into the grain boundaries between $Nd_2Fe_{14}B$ phases due to the difference of thermal expansion coefficient. Through the convergent heat treatment, the microcracks that were observed in cyclic heat treatment were not observed and coercivity was increased to 34.05 kOe at 8 cycles.

• Journal of Magnetics
• /
• 제7권4호
• /
• pp.143-146
• /
• 2002

Mechanical milling technique is considered to be a useful way of processing the fine Nd-Fe-B-type powder with high coercivity. In the present study, phase evolution of the $Nd_{15}(Fe_{1-x}Co_{x})_{77}B_{8}$ (x=0-0.6) alloys during the high energy mechanical milling and annealing was investigated. The effect of Co-substitution on the crystallization of the mechanically milled $Nd_{15}(Fe_{1-x}Co_{x})_{77}B_{8}$ amorphous material was examined. The Nd-Fe-B-type alloys can be amorphized completely by a high-energy mechanical milling. On annealing of the amorphous material, fine $\alpha$-Fe crystallites form first from the amorphous. These fine $\alpha$-Fe crystallites reacts with the remaining amorphous afterwards, leading to crystallization to $Nd_2Fe_{14}$B phase. The Co-substitution for Fe in $Nd_{15}(Fe_{1-x}Co_{x})_{77}B_{8}$ ($\mu$x=0∼0.6) alloys lower significantly the crystallization temperature of the amorphous phase to the $Nd_2Fe_{14}$B phase. The mechanically milled and annealed $Nd_{15}Fe_{77}B_8$ alloy without Co-substitution exhibits consistently better magnetic properties with respect to the alloys with Co-substitution.

• Elastomers and Composites
• /
• 제53권4호
• /
• pp.202-206
• /
• 2018

Five solution styrene butadiene rubber/neodymium butadiene rubber (SSBR/NdBR) composites were manufactured using different ratios of SSBR and NdBR. In this study, the composites were reinforced with NdBR and silica to confirm the physical properties of SSBR used for treads of automobile tires and the dispersibility with silica. The morphologies of the rubber composites were observed using field-emission scanning electron microscopy (FE-SEM). The crosslinking behaviors of the composites were tested using a rubber process analyzer (RPA), and the abrasion resistances were tested using a National Bureau of Standards (NBS) abrasion tester. The hardness values, tensile strengths, and cold resistances of the composites were also tested according to ASTM standards. Increased NdBR content yielded composites with excellent crosslinking properties, abrasion resistances, hardnesses, tensile strengths, and cold resistances. The crosslinking point increased due to the double bond in NdBR, thereby increasing the degree of crosslinking in the composites. The NdBR-reinforced composites exhibited excellent abrasion resistances, which is explained as follows. In SSBR, a breakage is permanent because a resonance structure between styrene and SSBR forms when the molecular backbone is broken during the abrasion process. However, NdBR forms an additional crosslink due to the breakdown of the molecular backbone and high reactivity of the radicals produced. In addition, the low glass transition temperature (Tg) of NdBR provided the rubber composites with excellent cold resistances.

• 한국세라믹학회지
• /
• 제22권4호
• /
• pp.15-20
• /
• 1985

$(Ba_{0.5} Pb_{0.5})_{1-x} Nd_x TiO_3$ 중의 $_x(Nd$의 양)를 변화시키면서 격자상수와 전기전도도를 측정하였다 c축과 a축의 비(c/a) 의 극대값은 실온에 있어서 전기전도도의 극대값과 일치하였다. 이것은 Nd원자의 치환위치와 강유 전성의 변화에 의한 것으로 고찰되었다 Curie 온도이하에서는 Nd 첨가량의 증가에 따라 전기전도도의 활성화에너지가 증가하는 경향을 나타내었다 이것은 입경의 감소에 따른 Spontaneous polarization의 저하가 원인으로 고찰되었다 첨가량의 역학을 입계의 potential barrier의 높이와 관련지어 논하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2013년도 자성 및 자성재료 국제학술대회
• /
• pp.93-93
• /
• 2013

In the talk, the present research and production status of NdFeB magnets in China is outlined. The main research on NdFeB magnets at Zhejiang University is presented. The microstructural restructuring of grain boundaries of sintered NdFeB is focused. Through microstructural restructuring, the corrosion resistance of sintered NdFeB can be effectively improved, and NdFeB magnets with high coercivity and low heavy RE contents can be fabricated.

• Transactions on Electrical and Electronic Materials
• /
• 제3권2호
• /
• pp.24-27
• /
• 2002

The NdBaCuO superconductor samples were zone-melted in low oxygen partial pressure (1%O$_2$+99%Ar). The zone-melting temperature was decreased about 12$0^{\circ}C$ film 1,06$0^{\circ}C$, the zone-melting temperature in air. Thus the loss of liquid phase (BaCuO$_2$ and CuO) was reduced during: the zone-melting process. The content of non-superconducting phase Nd422 in zone-melted NdBaCuO samples was clearly decreased and, therefore, the substitution of Nd for Ba was occurred. The superconductivity of zone-melted Nd$_{1+x}$Ba$_{2-x}$Cu$_3$O$_{y}$ prepared under low oxygen partial pressure was distinctively improved.d.d.d.

• 한국재료학회지
• /
• 제7권9호
• /
• pp.723-727
• /
• 1997

Nd치환이 Ag의 용융점 이하인 94$0^{\circ}C$에서 소결한 $Bi_{1-x}$$Nd_{x}$N$bO_{4}$세라믹스의 소결거동과 마이크로파 유전특성에 미치는 영향을 연구하였다. Nd치환량(x)이 증가함에 따라 사방점에서 삼사정으로 변하는 양이 증가하였고 결정립의 크기, 겉보기밀도, 유전상수는 감소하였다. Q$xf_{0}$값은 Nd 치환량이 0.025mole 이하의 경우 큰 변화가 없으나, 그 이상에서는 증가하여 0.1mol일 때 최고값을 보이고 다시 급격히 감소하였다. TCF값은 Nd치환량이 증가할수록(+)방향으로 증가하였다. 가장 우수한 마이크로파 유전특성은 Nd 치환량이 0.025mole일 때 얻어졌으며, 이때 유전상수는 43.7, Qxf/ sub 0/값은 11,046GHz, TCF값은 -1.82ppm/$^{\circ}C$이었다.