• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1087-1093
• /
• 2014

Ti과 Nb과 같은 안정화 원소가 첨가된 스테인리스강은 입계부식 방지 효과가 있어 해양 및 조선 산업에 널리 사용되는 내식성 재료이다. 본 연구에서는 STS 304 주성분에 탄소 안정화 원소인 Ti(0.26%, 0.71%)와 Nb(0.29%, 0.46%, 0.71%)을 농도 변수로 첨가한 시편을 제작하여, 안정화 원소 함량에 따른 기계적 특성 및 전기화학적 특성을 평가하였다. 합금 원소 첨가에 따른 재료의 기계적 특성 파악을 위해 마이크로 비커스 경도기를 이용하여 경도 측정을 실시하였다. 재료의 전기화학적 특성을 파악하기 위해 타펠분석, 사이클릭 분극(Cyclic polarization) 실험, 정전류 실험을 실시하여 재료별 내식성을 상호 비교하였다. 실험 결과, Nb 첨가 시편의 경우 Nb 함량 증가에 따라 경도 향상을 나타냈으나, Ti의 경우 경도 향상 효과가 미미한 것으로 나타났다. 전기화학특성의 경우 Nb 함량 증가에 따라 대체적으로 전기화학적 특성이 개선되는 반면 Ti의 경우 오히려 전기화학특성이 열화되는 것으로 나타났다. 결과적으로, 안정화 원소의 종류와 함량에 따라 전기화학적 특성이 큰 차이를 나타내며, 해수환경에 적용되는 스테인리스강 강종 개발시 이를 고려한 설계가 중요할 것으로 사료된다.

• Journal of Welding and Joining
• /
• 제27권3호
• /
• pp.52-59
• /
• 2009

Flash butt welding is applied in many industries. New technology was developed recently for joining billets which called "EBROS (Endless Bar Rolling System)". After reheating billets in furnace, two billets were joined using flash butt welding. The objective of this study was to investigate the effect of alloying elements on mechanical properties of flash butt welded zone of hot rolled steel bar. The tensile properties on welded zone of Fe-Mn steel and Fe-Mn-V steel were dropped as compared with non-welded zone. Fe-Mn-Nb steel was opposed to the former. It was found that the white band at the welded zone had high ferrite volume fraction and large ferrite grain size. The vertical white band between flash butt welded billets was transformed into an arrowhead it of steel bar. According to this band, softening has been appeared. There was a interesting phenomenon with HAZ of Fe-Mn-Nb Steel, 40nm scale of particles were observed and hardness of HAZ was higher than non-welded zone.

• 한국재료학회지
• /
• 제7권7호
• /
• pp.623-631
• /
• 1997

본 연구에서는 주조 2상 스테인리스강의열시효에 대한 시효온도, 시효시간 및 Nb함유량의 영향을 관찰하기 위해 기계적 성질 및 조직을 조사하였으며 Nb을 함유한 주조 2상 스테인리스강의 파괴기구를 규명하기 위해 SEM에 의한 파단면 관찰과 WDS성분분석을 통해 파괴기구의 특성을 고찰하였다. 시효온도와 시효시간이 증가함에 따라 페라니트으 미소경도가 증가하였으며 항복강도의 경우 시효온도와 시효시간에는 영향을 받지 않았으나 Nb을 함유한 재료들이 Nb을 함유치 않은 재료들에 비해 다소 낮은 항복강도 값을 보였다. 충격흡수에너지 값은 시효시간 및 시효온도의 증가에 따라 시험된 모든 재료에서 저하되었는데 0.4% Nb을 함유하는 경우 Nb을 약간 함유하거나 함유치 않은 재료들에 비해 시효시간에 따라 급격한 감소 경향을 보였다. 파단면 관찰결과 페라이트 기지 또는 페라이트/오스테나이트 상경계에서 석출된 VbC를 비롯한 탄화물들이 취성저항성을 낮추는데 크게 기여했음을 알 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.333-336
• /
• 2005

The reduction behavior of $Nb_2O_5$ in aluminum containing self-reducing briquettes(SRNB) was investigated. The time required for slag/metal equilibrium was estimated as about 20 minutes from the addition of SRNB on to the surface of molten steel. The maximum yield of Nb was expected with the slag composition of $60\%CaO-40\%Al_2O_3$. When $CaCO_3$ was used as a flux, the oxidation loss of Al by $CO_2$ should be compensated, and the chemical equivalent ratio of Al to $Nb_2O_5$ of about 1.43 was required to maximize the yield of Nb.

• 열처리공학회지
• /
• 제37권4호
• /
• pp.163-171
• /
• 2024

SCR420H steel is a low-carbon chromium alloy steel designed for carburizing heat treatment. Recently, research is being conducted on high-temperature carburization heat treatment to reduce costs and CO₂ emissions by shortening the carburization time to meet the international carbon neutral policy. However, this high-temperature carburization heat treatment coarsens the steel grains and causes a decrease in mechanical properties. In this study, a large amount of Ti was added to increase the grain refinement effect in the high-temperature carburizing process. We investigated the microstructure and precipitates of SCR420H steel without Ti (Al steel) and with Ti (AlTi steel). Thermodynamic calculations showed that the AlN and (Ti,Nb)(C,N) precipitated in Al steel, while (Ti,Nb)(C,N) and Ti₄C₂S₂ precipitated in AlTi steel. Addition of Ti increases the fraction of bainite after reheating process. Transmission electron microscopy analysis shows that small amounts of AlN and (Ti,Nb)(C,N) precipitates are formed in the Al steel. The addition of Ti increases the density of (Ti,Nb)(C,N) precipitates and induces the formation of Ti₄C₂S₂ precipitates, increasing the grain coarsening temperature (GCT) under all heat treatment conditions. Higher reheating temperatures also resulted in higher GCT values due to increased precipitation.

• 열처리공학회지
• /
• 제26권2호
• /
• pp.59-65
• /
• 2013

The microstructures and hardness distributions of a large-sized high strength H-sectional steel with both V and Nb were systematically examined. The outer surface of the flange part was composed of martensite and bainite due to faster cooling, and had a high hardness value of approximately 310 Hv. However, the amounts of ferrite and pearlite increased and the hardness decreased with increasing the distance from the outer surface at the flange part, except the inner surface. High hardness value of about 290 Hv was measured at the upper surface of the web part having martensite and bainite. The hardness drastically decreased with increasing the web thickness, and then greatly rose again at the lower surface due to bainite formation caused by fast air cooling. The hardness of the flange part was higher than that of the web part due to the larger amount of low-temperature transformed phases, except for the lower surface of the web part. Nb-rich precipitates of 30 to 50 nm and V-rich precipitates less than 20 nm were observed at both flange and web parts. However, the particle size was smaller at the flange part than the web part, resulting in the higher strength of the flange part.

• 비파괴검사학회지
• /
• 제27권5호
• /
• pp.417-425
• /
• 2007

보자력 측정을 통하여 페라이트기 9Cr-1Mo-V-Nb 내열강의 크리프-피로변형 동안 미세조직의 변화를 평가하였다. 크리프-피로시험은 $550\;^{\circ}C$에서 각각 인장유지시간을 60초와 600초로 하여 수행 하였다. 보자력은 파단 전까지 감소하였고 경도는 파단 시까지 지속적으로 감소하였다. 크리프-피로 수명소비율이 증가함에 따라서 $M_{23}C_6$ 탄화물은 오스트왈드 성장기구를 따라서 조대화가 나타났지만 MX 탄질화물은 $550\;^{\circ}C$에서 안정하기 때문에 조대화가 나타나지 않았다. 마르텐사이트 래스 폭은 래스경계에서의 전위회복으로 인해 증가하였다. 보자력은 전위, 석출물 그리고 마르텐사이트 래스경계와 같은 미세조직적 특성에 영향을 받게 되며 이를 미세조직변화와 관련하여 이해하였다. 결과적으로, 본 연구는 페라이트기 9Cr-1Mo-V-Nb 내열강의 크리프-피로변형 동안 미세조직의 변화와 손상 정도를 보자력을 통하여 평가하는 것을 제안하였다.

• 한국재료학회지
• /
• 제22권1호
• /
• pp.16-23
• /
• 2012

Research into the development of high strength (1 GPa) and superior formability, such as total elongation (10%), and stretch-flangeability (50%) in hot-rolled steel was conducted with a thermomechanically controlled hot-rolling process. To improve the overall mechanical properties simultaneously, low-carbon steel using precipitation hardening of Ti-Nb-V multimicroalloying elements was employed. And, ideal microstructural characteristics for the realization of balanced mechanical properties were determined using SEM, EBSD, and TEM analyses. The developed steel, 0.06C-2.0Mn-0.5Cr-0.2(Ti + Nb + V), consisted of ferrite as the matrix phase and second phase of granular bainite with fine carbides (20-50 nm) in both phases. The significant factor of the microstructural characteristics that affect stretch-flangeability was found to be the microstructural homogeneity. The microstructural homogeneity, manifest in such characteristics as low localization of plastic strain and internally stored energy, was identified by grain average misorientation method, analyzed by electron backscattered diffraction (EBSD) and hardness deviation between the phases. In summar, a hot-rolled steel having a composition 0.06C-2.0Mn-0.5Cr-0.2(Ti + Nb + V) demonstrated a tensile strength of 998 MPa, a total elongation of 19%, and a hole expansion ratio of 65%. The most important factors to satisfy the mechanical property were the presence of fine carbides and the microstructural homogeneity, which provided low hardness deviation between the phases.

• Nuclear Engineering and Technology
• /
• 제2권4호
• /
• pp.279-287
• /
• 1970

An an element vanadium is most effective and next is noibium to strengthening the low carbon steels by small addition both on fine precipitation and five grain. The combination effect of vanadium plus niobium or vanadium plus molybdenum is much more effective than adding on element.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 동계학술연구발표회 및 2차 아시안포럼
• /
• pp.7-7
• /
• 2005