• 제목/요약/키워드: Navigation Satellite System

검색결과 842건 처리시간 0.035초

재밍대응 5소자 평면 GPS 배열 안테나 설계 (Design of an Anti-Jamming Five-Element Planar GPS Array Antenna)

  • 서승모
    • 한국전자파학회논문지
    • /
    • 제25권6호
    • /
    • pp.628-636
    • /
    • 2014
  • 본 논문은 재밍 대응 위성 항법 장치의 5소자 평면 배열 안테나 설계에 대해 기술한다. GPS $L_1/L_2$ 대역에서 공진하는 적층 구조의 패치 안테나 설계를 제안한다. 제안된 안테나는 광대역 및 원형 편파 특성을 구현하기 위해 칩 커플러를 이용한 이중 급전을 사용한다. 배열안테나 측정 결과, 중앙안테나의 전면 방향 이득은 $L_1$$L_2$ 대역에서 각각 1.10 dBic, 0.37 dBic, 측면안테나는 $L_1$$L_2$ 대역에서 0.99 dBic, -0.57 dBic를 갖는다. 고각 $30^{\circ}$에서 방위각의 이득은 중앙안테나 $L_1$$L_2$ 대역에서 평균 -2.08 dBic, -5.33 dBic의 측정 결과를 갖는다. 측면안테나는 $L_1$$L_2$ 대역에서 평균 -0.40 dBic, -2.09 dBic의 측정 결과를 갖는다. 제안된 5소자 평면 배열 안테나는 GPS 재밍 대응 장치에 적합함을 확인한다.

GNSS 반사신호를 이용한 토양수분 산출 가능성 연구 (Feasibility Study on Soil Moisture Retrieval using GNSS Reflected Signal)

  • 신대윤
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2016년도 학술발표회
    • /
    • pp.80-80
    • /
    • 2016
  • GPS로 대표되는 위성항법시스템(GNSS : Global Navigation Satellite System)은 지구 주위를 돌면서 연속적으로 항법신호를 보내고 있다. 그 중 지구표면으로부터 반사되는 항법신호를 수신하고 해석함으로써 지구표면에 관한 정보를 취득할 수가 있다. GPS로 대표되는 항법신호는 L밴드를 사용하기 때문에 토양수분의 변화 등에 대한 반사강도의 감도가 비교적 높다고 알려져 있으며, 토양수분 측정 등에 사용할 수 있다. 뿐만 아니라 경량화, 소형화하기 쉬운 점, 능동적 마이크로웨이브 리모트센싱시스템(Active Microwave Remote Sensing System)과 달리 스스로 신호를 발사하지 않기 때문에 관측의 스텔스성(Stealth)dl 뛰어난 점 등의 장점을 가지고 있다. 또한 향후 10년 이내에 준천정위성(QZSS), Galileo, COMPAS, IRNSS 등 많은 위성항법시스템이 본격 운용되어 GPS와 함께 120기 정도의 항법위성이 항법신호를 송신할 예정이므로 이용 가능성은 크게 늘어날 것으로 기대된다.한편, 항법위성을 이용한 바이스테이틱 리모트센싱은 반사파의 강도가 상당히 미약하기 때문에 정량적 계측모델의 구축은 미미한 상태이다. 즉, 지상 타워에서의 관측, 항공기에서의 관측, 소형 위성에서의 관측 등이 수행되고 있으나, 타워관측과 같이 지상의 거의 동일한 장소를 계속적으로 관측하는 경우를 제외한 기존의 연구에서는 토지의 피복상황이나 토양수분 등의 상관관계를 제시하는 수준으로써 정량적인 계측방법은 아직 확립되어 있지 않다. 이러한 관점에서 본 연구에서는 GPS위성으로부터의 항법신호를 이용하여 지구표면에 관한 정보를 얻는 바이스테이틱 리모트센싱(Bi-static Remote Sensing) 기술을 바탕으로 육지면과 해면의 판별에 신호특성이 어떻게 유효한가를 실험적으로 밝혔다. 이러한 기술은 토양수분 측정 등 수자 원인자를 추출하는데 유용할 뿐만 아니라 수면의 고도 측정, 해상풍 산출 등에도 응용 가능하다.

  • PDF

DGNSS RSIM을 위한 GPS/Galileo 의사거리 보정기법 (Method of Differential Corrections Using GPS/Galileo Pseudorange Measurement for DGNSS RSIM)

  • 서기열;김영기;장원석;박상현
    • 한국항해항만학회지
    • /
    • 제38권4호
    • /
    • pp.373-378
    • /
    • 2014
  • 본 논문에서는 위성항법시스템(GNSS)의 다양화에 따른 DGNSS 기준국(RSIM, Reference Station and Integrity Monitor)의 재구축을 위하여, 유럽연합(EU) 위성항법시스템인 Galileo의 E1 의사거리 보정정보 생성 알고리즘과 GPS/Galileo 시뮬레이션을 통한 성능검증에 대해 다룬다. 먼저 DGPS RSIM에서 DGNSS RSIM으로 전환을 위한 운영적 측면에서의 기술 및 메시지 표준과 사용자 방송 측면에서의 메시지 표준에 대해 살펴본다. 일반적으로 GNSS의 의사거리 보정을 위해서는 정확한 GNSS 위성위치와 사용자 위치를 알아야만 한다. 그러므로 Galileo 위성위치를 정확하게 계산하기 위해서, Galileo ICD 문건의 위성위치 계산식을 이용하여 사용자 수신기에서 제공하는 궤도력 정보를 기반으로 해당 위성 위치를 추정한다. 그리고 위성시계 옵셋과 사용자 수신기의 시각오차, GPS와 Galileo 위성의 시스템 타임 옵셋을 계산하여 GPS/Galileo 의사거리 보정정보를 생성한다. GPS/Galileo 시뮬레이터를 연동한 성능검증 플랫폼을 기반으로 GPS/Galileo 보정정보의 오차를 분석하고, 측위정확도를 분석하여 그 성능을 검증하였다. 국제기구(RTCM)에서 요구하는 기준국 운영을 위한 측위 성능을 충족할 수 있음을 확인하였다.

L-band 위성통신 시스템을 위한 극소형 25 Watt 고출력증폭기에 관한 연구 (A Study on the Ultra Small Size 25 Watt High Power Amplifier for Satellite Mobile Communications System at L-Band)

  • 전중성;예병덕;김동일
    • 한국항해항만학회지
    • /
    • 제26권1호
    • /
    • pp.22-27
    • /
    • 2002
  • 본 논문에서는 hybrid 기법을 이용하여 INMARSAT 위성의 상향 주파수인 L-HAND(1.6265∼1.6465 GHz)에서 동작하는 위성단말기용 25 Watt C급 고출력증폭기를 설계 ·제작하였다. 제작의 간편성을 위해서 전력증폭기를 크게 구동증폭단과 전력증폭단으로 나누어 구현하였으며, 전력증폭단을 구동하기 위한 구동단은 Motorola사의 MRF-640을 사용하여 2단으로 구성하였고, 전력증폭단은 MRF-16006과 MRF-16730을 사용하였다. 또 각 부에 직류 전원을 공급하기 위해 바이어스 회로부를 같은 하우징 내에 장착하여 무게 및 부피를 최소화하였다. 제작된 고출력증폭기는 20 MHz 대역폭 내에서 이득이 30 dB 이상, 입 ·출력 정재파비는 1.7 이하의 특성을 가졌다. 1.635 GHz 주파수에 대해 1 dB 압축점의 출력전력은 44 dBm 으로서 설계시 목표로 했던 출력전력 25 Watt를 상회하였다. 본 논문에서 제시한 SSPA(Solid State Power Amplifier) 제작 기법은 각종 Radar 및 SCPC(Signal Channel Per Carrier)용 전력증폭기 설계 및 제작에도 적용할 수 있다.

아시아의 우주개발과 우주법 (Space Development and Law in Asia)

  • 조홍제
    • 항공우주정책ㆍ법학회지
    • /
    • 제28권2호
    • /
    • pp.349-384
    • /
    • 2013
  • 1957년 스푸트니크 1호 발사 이후 세계는 우주활동에 대한 국제적 규범의 필요성을 인식하였으며, 유엔은 우주의 평화적 이용위원회를 설립하여 이러한 문제들을 검토하여 왔다. 1960년대는 미소가 군사적 우주활동을 중심으로 하여왔으나, 최근에는 민간의 우주활동들도 상당히 증가되고 있다. 특히, 우주활동으로 인한 사회적, 경제적 혜택은 더욱 가시화됨에 따라, 각국은 우주 활동에 대한 민간 지출을 계속 증가 시키고 있다. 거의 모든 새로운 우주활동에 참여하는 국가들은 사회 및 경제 개발을 지원하기 위해 우주기반 활동에 더욱 중점을 두고 있다. 위성 항법 및 지상관측과 같은 우주활동들은 기존의 민간 우주 프로그램의 핵심이다. 이와 더불어 달 탐사는 중국, 러시아, 인도, 일본 등 우주력이 있는 국가들에게 우선순위가 되어가고 있다. 최근 위성 및 지상 장비를 제조하는 회사들은 상당한 성장을 하고 있다. 중국은 2012년 2월 25일 자체 개발한 지구항법 위성시스템을 위한 열한 번째 위성을 성공적으로 발사하였다. 중국은 1986년에 중국 만리장성 산업주식회사에 부여된 우주활동으로부터 발전하기 시작했다. 중국 항천공사는 1993년 중국의 국가우주국의 설립에 이어, 창설되었다. 일본의 민간우주활동은 1960년에 창설된 국가우주활동위원회에 의해 이루어졌다. 대부분의 활동은 동경대학, 국립항공 우주 연구소 항공과학연구소 및 국립 우주 개발 기구에 의해 수행 되었다. 2003년에 이 모든 활동들은 일본 우주항공개발연구기구(JAXA)로 통합되었다. 일본은 군사적인 우주개발에 대한 제한을 완화하였다. 2012년 6월 일본은 우주기본법을 수정하여 JAXA을 포함한 일본의 우주 정책과 예산을 통제할 수 있는 권한과 조직을 개편하였다. 과거 문화체육부에 소속되어 있던 우주 프로그램의 개발에 대한 책임을 수상직할로 변경하였다. 그리고 JAXA를 규율하던 우주기본법 제4조의 "평화적인 목적으로만 사용" 한다는 조항을 삭제함으로써 비공격적인 군사적 우주활동을 할 수 있게 되었다. 이로써 동아시아의 긴장이 증대되는 시점에서 국가방위를 강화하기 위한 목적에서 우주를 이용하기 위한 가능성을 열어놓았다. 이러한 점에서 아시아의 상업적 우주활동을 발전시키기 위한 협력적 기구 창설이 필요하다.

  • PDF

VI-GNSS 지하구조물 현장정보 네트워크 아키텍쳐 설계 (Design of Network Architecture in Underground Structure Field Information Based on VI-GNSS)

  • 전흥수;장용구;오창균;김민관
    • 한국지리정보학회지
    • /
    • 제18권1호
    • /
    • pp.64-73
    • /
    • 2015
  • 최근 들어, 건설현장에서의 안전사고에 대한 예방 및 신속한 대응과 함께 현장관리의 효율화를 위해서 IT와의 통합적 활용이 요구되고, 작업자의 안전 확보와 원활한 작업지시 그리고 시공의 효율성 등을 구현하기 위한 건설현장지원시스템의 구축이 필요하다. 본 연구에서는 현재 VI-GNSS(Voice Integrated-Global Navigation Satellite System)통합기술 기반의 지하구조물 건설현장지원시스템(USFSS, Underground Structure Field Support System)구축을 위하여 시스템 간 정보 전송 및 관리를 위해 데이터 및 음성정보에 대한 정보 표준화와 네트워크 아키텍쳐를 설계하였다. 이를 통하여 구축된 시스템별 정보의 안정성 테스트에서 데이터 전송 안정성의 경우 지하구조물 내 작업자 및 이동차량 시스템과 현장서버시스템에서는 각각 약 98%, 현장서버시스템과 관제시스템사이의 안정성은 약 100%를 확보할 수 있었다. 또한, 음성 전송 안정성 테스트에서 FRS(Family Radio Station)무선시스템을 통한 지하구조물 건설현장과 현장 주변 현장사무소까지의 음성 전송의 경우 1km 거리 구간을 기준으로 약 99%의 신뢰성을 확보하였다.

Application of Remote Sensing and GIS technology for monitoring coastal changes in estuary area of the Red river system, Vietnam

  • Lan, Pham Thi;Son, Tong Si;Gunasekara, Kavinda;Nhan, Nguyen Thi;Hien, La Phu
    • 한국측량학회지
    • /
    • 제31권6_2호
    • /
    • pp.529-538
    • /
    • 2013
  • Coastline is the most dynamic part of seascape since its shape is affected by various factors. Coastal zone is an area with immense geological, geomorphological and ecological interest. Monitoring coastal change is very important for safe navigation, coastal resource management. This paper shows a result of monitoring coastal morphological changes using Remote Sensing and GIS. Study was carried out to obtain intensity of erosion, deposition and sand bar movement in the Red River Delta. Satellite images of ALOS/AVNIR-2 and Landsat were used for the monitoring of coastal morphological changes over the period of 1975 to 2009. Band rationing and threshold technique was used for the coastline extraction. Tidal levels at the time of image acquisition varied from -0.89m to 2.87m. Therefore, coastline from another image at a different tidal level in the same year was considered to get the corrected coastline by interpolation technique. A series of points were generated along the coastal line from 1975 image and were established as reference points to see the change in later periods. The changes were measured in Euclidean distances from these reference points. Positive values represented deposition to the sea and negative values are erosion. The result showed that the Red river delta area expanded to the sea 3500m in Red river mouth, and 2873m in Thai Binh river mouth from 1975 to 2009. The erosion process occurred continuously from 1975 up to now with the average magnitude 23.77m/year from 1975 to 1989 and 7.85m/year from 2001 to 2009 in Giao Thuy area. From 1975 to 2009, total 1095.2ha of settlement area was eroded by sea. On the other hand, land expanded to the sea in 4786.24ha of mangrove and 1673.98ha of aquaculture.

Accuracy Analysis of GNSS-derived Orthometric Height in Mountainous Areas

  • Lee, Jisun;Kwon, Jay Hyoun;Lee, Hungkyu;Park, Jong Soo
    • 한국측량학회지
    • /
    • 제36권5호
    • /
    • pp.403-412
    • /
    • 2018
  • Recently, GNSS (Global Navigation Satellite System)-derived orthometric height determination has been studied to improve the time and cost-effectiveness of traditional leveling surveying. However, the accuracy of this new survey method was evaluated when unknown points are located lower than control points. In this study, the accuracy of GNSS-derived orthometric height was examined using TPs (Triangulation Points) to verify the stability of surveying in mountainous areas. The GNSS survey data were obtained from Mungyeong, Unbong/Hadong, Uljin, and Jangseong. Three unknown points were surrounded by more than three UCPs (Unified Control Points) or BMs (Benchmarks) following the guideline for applying GNSS-derived orthometric height determination. A newly developed national geoid model, KNGeoid17 (Korean National Geoid 2017), has been applied for determining the orthometric height. In comparison with the official orthometric heights of the TPs, the heights of the unknown points in Mungyeong and Unbong/Hadong differ by more than 20 cm. On the other hand, TPs in Uljin and Jangseong show 15-16 cm of local bias with respect to the official products. Since the precision of official orthometric heights of TPs is known to be about 10 cm, these errors exceed the limit of the precision. Therefore, the official products should be checked to offer more reliable results to surveyors. As an alternative method of verifying accuracy, three different GNSS post-processing software were applied, and the results from each software were compared. The results showed that the differences in the whole test areas did not exceed 5 cm. Therefore, it was concluded that the precision of the GNSS-derived orthometric height was less than 5 cm, even though the unknown points were higher than the control points.

Precision Evaluation of Recent Global Geopotential Models based on GNSS/Leveling Data on Unified Control Points

  • Lee, Jisun;Kwon, Jay Hyoun
    • 한국측량학회지
    • /
    • 제38권2호
    • /
    • pp.153-163
    • /
    • 2020
  • After launching the GOCE (Gravity Field and Steady-State Ocean Circulation Explorer) which obtains high-frequency gravity signal using a gravity gradiometer, many research institutes are concentrating on the development of GGM (Global Geopotential Model) based on GOCE data and evaluating its precision. The precision of some GGMs was also evaluated in Korea. However, some studies dealt with GGMs constructed based on initial GOCE data or others applied a part of GNSS (Global Navigation Satellite System) / Leveling data on UCPs (Unified Control Points) for the precision evaluation. Now, GGMs which have a higher degree than EGM2008 (Earth Gravitational Model 2008) are available and UCPs were fully established at the end of 2019. Thus, EIGEN-6C4 (European Improved Gravity Field of the Earth by New techniques - 6C4), GECO (GOCE and EGM2008 Combined model), XGM2016 (Experimental Gravity Field Model 2016), SGG-UGM-1, XGM2019e_2159 were collected with EGM2008, and their precisions were assessed based on the GNSS/Leveling data on UCPs. Among GGMs, it was found that XGM2019e_2159 showed the minimum difference compared to a total of 5,313 points of GNSS/Leveling data. It is about a 1.5cm and 0.6cm level of improvement compare to EGM2008 and EIGEN-6C4. Especially, the local biases in the northern part of Gyeonggi-do, Jeju island shown in the EGM2008 was removed, so that both mean and standard deviation of the difference of XGM2019e_2159 to the GNSS/Leveling are homogeneous regardless of region (mountainous or plain area). NGA (National Geospatial-Intelligence Agency) is currently in progress in developing EGM2020 and XGM2019e_2159 is the experimentally published model of EGM2020. Therefore, it is expected that the improved GGM will be available shortly so that it is necessary to verify the precision of new GGMs consistently.

차세대 GPS 시스템에 알맞은 국소 신호 설계 (Local Signal Design for Future GPS Systems)

  • 채근홍;윤석호
    • 한국통신학회논문지
    • /
    • 제39A권6호
    • /
    • pp.350-356
    • /
    • 2014
  • 본 논문에서는 차세대 GPS 시스템에 채용된 시간 복합 이진 옵셋 반송파의 (time-multiplexed binary offset carrier: TMBOC) 신호 추적 성능을 향상시키기 위한 국소 신호를 설계한다. 구체적으로 TMBOC 변조는 BOC(6,1) 신호 성분을 포함하고 있다는 점으로부터 착안하여, TMBOC(6,1,4/33) 신호의 부반송파를 BOC(6,1) 부 반송파 펄스 주기로 일정하게 나누는 방식으로 국소 신호를 설계한다. 이후, 설계한 국소 신호를 통해 얻은 부분 상관함수들을 재조합하여 TMBOC(6,1,4/33) 신호의 자기상관함수에 존재하는 주변 첨두를 제거함으로써 모호성 문제를 해결한다. 모의실험을 통해 설계한 국소 신호를 이용하여 신호 추적을 수행할 경우, 자기상관함수 및 기존의 기법을 이용하는 경우에 비해 향상된 추적 오류 표준편차 (tracking error standard deviation: TESD) 성능을 가짐을 확인하였다.