• Journal of the Korean Institute of Rural Architecture
• /
• v.22 no.1
• /
• pp.21-30
• /
• 2020

It is a trend to pursue the reinforcement of child-centered, play-oriented ecological education programs that support children's development. Most of these nature friendly and eco education is done in the outdoor space. So outdoor activities in child care facilities are essential. The purpose of this study was to analyze the actual condition of the outdoor space for ecological child education in the child care center. Therefore, in order to provide the basic data for the direction of the improvement and to grasp the current situation and problems, the survey and analysis of the external space composition and utilization status in the child care facilities for nature-friendly ecological child care education has been done. As a result, the half of the cases did not reserve even the minimum size of outdoor space and fall short of the standards of outdoor space quality as accessibility, complexity, articulation and nature friendliness for ecological education. Therefore, in order to establish an ecological education environment, it is necessary to build facilities in natural green or suburban areas. In addition, they need to use the natural environment such as parks, open spaces, and forests.

• Korean Journal of Materials Research
• /
• v.32 no.12
• /
• pp.533-537
• /
• 2022

Flexible zinc-air batteries have many merits, including low cost, high safety, environmentally friendliness applicability, etc. One of the key factors to improve the performance of flexible zinc-air batteries is to use a gel electrolyte. In this study, gel electrolytes were synthesized from potato, sweet potato, and corn starch. In a comparison of each starch, the corn starch-based gel electrolyte showed the highest discharge capacity of 12.41 mAh/cm² in 20 mA and 6.47 mAh/cm² in 30 mA. It also delivered a higher specific discharge capacity of 7.06 mAh/cm² than the other materials after 100° bending. In addition, the electrochemical impedance spectroscopy (EIS) was analyzed to calculate the ionic conductivity. The potato, sweet potato, and corn starch-based gel electrolytes showed electrolyte resistances (Re) of 0.306, 0.298, and 0.207 Ω, respectively. In addition, the corn starch-based gel electrolyte delivered the highest ionic conductivity of 0.121 S cm^-1 among the other gel electrolytes. Thus, the corn starch-based gel electrolyte was verified to improve the performance of flexible zinc-air batteries.

• Korean Institute of Interior Design Journal
• /
• no.16
• /
• pp.49-58
• /
• 1998

This paper proposes a way to design a multi-purpose hall which can serve as a culture and art space for college students and which can also accommodate college students' behaviour characteristics. The major claims made in this paper are as follows. First the hall should be located where it is easily accessible from major and minor campus facilities. Second friendliness between inside and outside of the hall should be established by providing a Gray Zone such as floor or a yard. Third lobby should have a enough space for the entrance and exit of the hall and for rest and refreshments. Fourth in addition to a fixed stage height-adjustable stage and booth should be provided in order to use the hall space for different use. Fifth in the color aspect high value and low chroma should be used to create tender and friendly atmospher and in the shape aspect a durable natural and functional design should be considered in order to create a modern atmosphere.

• KIEAE Journal
• /
• v.9 no.3
• /
• pp.29-36
• /
• 2009

Interior material covering as the final process of house-building, critically influences not only aesthetic character but also air quality of indoor space. Wall covering today, however, caused a serious social problem because of chemicals contained in the industrial wallpaper and artificial glue. In this context, Korean traditional wall covering of Han-ji can be an alternative model due to it's ecological character. Recently 'Hanok' attracts public attention, since society and people become to appreciate the unique beauty and value of our traditional culture. The values include natural beauty, emotional character, and environment-friendliness. Recognizing this, this paper intended to scrutinize the operating process of Han-ji as an interior finish material. Historical research method was employed, tracing the related articles in old literature and interviewing with the witness of the experienced expert. Thereby, healthier and unique aesthetic indoor environment can be expected to be sustainable along with the rich cultural life of ancestors.

• The Research Journal of the Costume Culture
• /
• v.11 no.3
• /
• pp.423-430
• /
• 2003

Cotton fabric md nylon fabric were chosen as base fabric specimens for dyeing using Japanese pagoda tree colorants through chitosan, treatment. With the chitosan treatment, the dye-uptake of the treated fabric increased. This treatment is also expected to be effective in terms of environment-friendliness. The effect of the dyeing methods, mordanting or non-mordanting, and chitosan treatment on the dye-uptake and air permeability of the treated fabrics was investigated. In case of cotton fabric, Al mordanted dyeing resulted in higher dye-uptake through the chitosan treatment. Therefore, the chitosan treatment is effective in this case. Japanese pagoda tree seems to have direct affinity for nylon fabric without the mordanting treatment. In case of cotton fabric, it seems that the cellulose molecules, colorants, and the chitosan make a complex, thereby reducing the air permeability. In case of nylon fabric, due to the fact the Japanese pagoda tree colorant molecules form direct physical bonding with the nylon molecules, it seems that there is not much of air permeability reduction.

• Korean Journal of Metals and Materials
• /
• v.46 no.8
• /
• pp.471-476
• /
• 2008

There has been a growing interest for the use of natural fibers in composite applications due to their low cost, environmental friendliness, and good mechanical properties. It was demonstrated to determine the characteristic of tensile behaviors under the variation of test temperature on sisal fiber reinforced polymer composites by RTM process. Especially, the permanganate-treated-fibers improved tensile strength by increasing the coherence with matrix. Material deformation is restricted to increment of cohesion for surface treatment of fiber and then elongation decreas.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.6
• /
• pp.22-33
• /
• 2009

This study was undertaken to provide a basis for planning trail standards, providing rights of movement, improvement of health and the experience of nature for at-risk walkers for application to the Umyen Park site. This study researched related laws, manuals, scholastic writing and the established site, a raku-raku mountain trail in Osata, Japan. By referencing these results and similar standards, a conceptual trail plan for at-risk walkers was created. The plan suggests five points -- accessibility, convenience, social aspects, economic efficiency, and environmentally-friendliness -- and referenced an evaluation of outdoor living environments for the elderly. The planning standards are comprised of four steps that are ranked in order and are related to the selection of location, trail structure, route patterns, and equipment. Plans for trails catering to at-risk walkers in Umyen Park were then based on these standards. As a result, it was found that the mountain has both a high elevation and abundant natural resource, both of which must be taken into account during planning. This study is valuable because it is one of the first studies of trail plans for at-risk walkers made in mountainous urban parte. Subsequent research can use the standards of this study for further evaluation while future modifications must reflect changing needs and details.

• Korea Science and Art Forum
• /
• v.37 no.5
• /
• pp.239-248
• /
• 2019

This study started from the need to improve one of shortcomings of synthetic PVAc adhesives - potential physical harm and environmental hazards to the workers or their users. As a matter of fact, PVAc adhesives are currently mainly used because of their convenience and economy for the production of woodcrafts. The purpose of this study was to develop natural adhesives through research on natural adhesives in step with the current increase of societal attention to environmental friendliness and rapid surge in their demand in the face of such problems. So, the study attempted research on the bases to develop natural adhesives for woodcraft, using cellulose extracts from wood - natural adhesive material. The findings of the study were as follows. Firstly, natural adhesives showed the improved effect in the field of adhesive strength, a basic physical property by 0.2 - 4 times compared with the existing materials and the study confirmed they had the similar or stable pH value. Besides, they had good reversibility, demonstrating their basic physical property as a natural adhesive for woodcraft. While, their durability to ultraviolet ray degradation also showed an excellent result value being better by 1.5 - 8.5 times than the existing materials. The study expects natural adhesives with improved and better performances compared with the existing materials could be developed, if further research on adhesive strength, antibiosis, conservative property were to continue by developing refinery technology for cellulose extracts from wood and rendering the functionality to them.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.425-430
• /
• 2019

Zinc coatings are widely used because of their environmental friendliness and high performance. In general, the coating temperature is a major factor in determining the coating layer thickness and coating quality. In the case of a zinc coating, a uniform and appropriate coating temperature is required. In this study, a thermal flow simulation of the air flow was performed to analyze the temperature distribution of a zinc spray coating room in a natural convection state. Using SolidWorks, modeling was performed for two spray coating rooms, a preheating room, and a drying room, and a thermal flow coupled analysis was performed using ANSYS-FLUENT. As a result of the analysis, the temperature distribution characteristics in the spray coating rooms were determined. It was found that the present temperature was below the target temperature of $25^{\circ}C$. Simulations were conducted for two different boundary conditions (one with a heater added and another with the open part closed). The simulation results show that the method of closing the open part is better than adding the heater.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.45-51
• /
• 2012

This article aims to find method to mix a harmless hardening agent and soil generated during construction to make paving materials. The main purpose of this research is to get rid of the harmfulness(Chromium (VI), etc.) of cement which has been generally and frequently used as a hardening agent and strengthen it so that it can be used for the general foundation solidification and stabilization of civil engineering/construction structures such as dredging soil treatment, marine structure foundation treatment, surface soil stabilization, and river bank erosion prevention. NSS(Natural Stabilizer Soil) used for this study takes as its chief ingredient the mixture of lime and staple fibers extracted from natural fibers. It increases the shearing strength of soil that it improves the support and durability of the foundation and prevents flooding and frost as well. The pH measured to know its eco-friendliness was 6.67~7.15, and according to the migration testing, only Pb and CN were lower than the standards, so it can be said that NSS has almost no harmful components in it. According to the result of uniaxial strength testing, when the mixture ratio of weathered soil to NSS was 6%, about 1,850kpa strength was expressed. And according to the result of CBR. testing to figure out its appropriateness as a paving material, the CBR of the foundation was 4%~6%. But when the mixture ratio of NSS is over 6%, the water immersion CBR. is over 100%; thus, it is expected that it will show great utility as a paving material.