• Korean Journal of Plant Resources
• /
• v.35 no.3
• /
• pp.399-404
• /
• 2022

Russian dandelion, Taraxacum kok-saghyz L.E.Rodin, is an important alternative source of natural rubber. Thus, it is critical to identify the best season for natural rubber production and harvesting for this species. In this study, T. kok-saghyz was grown in experimental fields in Korea to check the variation in rubber content with the change in the season. Studies using T. kok-saghyz plants indicate that spring and autumn are the best seasons for rubber accumulation. For several reasons, our study suggests that planting in autumn and harvesting in late spring is the best strategy for economic cultivation in Korea. Our data will be useful for future commercialization of rubber production from T. kok-saghyz because time will be saved if the plant is grown and harvested in the optimum season.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.988-993
• /
• 2002

The AVT under traffic-induced vibrations was carried out on Namhae suspension bridge in Korea. Mode shapes as well as natural frequencies up to the 15th mode were acquired exactly, and the effect of traffic mass and temperature on measured natural frequencies was investigated. The results from the AVT are compared with those from forced vibration test(FVT) and FE analysis. In the case of long span suspension bridges such as Namhae bridge which has relatively large mass, the results shows that the measured natural frequencies are not affected by vehicle mass. From the results of long-term variation of natural frequencies due to temperature change, it can be said that temperature effect may be predominant to structural demage effect. Therefore, if damage detection methods based on dynamic characteristics of bridges are to be used, the variation should be taken into consideration.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.18 no.5
• /
• pp.253-259
• /
• 2014

Porcelain surge arrestor is very vulnerable to earthquake but there is very few information on its dynamic characteristics which are necessary to the seismic design. Therefore, the dynamic characteristics of the porcelain surge arrestor are evaluated considering the variation of its cable tension and stiffness by shaking table test. The test results show that the first natural frequencies are 5.3 Hz and 5.2 Hz in the horizontal x- and y-axis directions, respectively, and higher than 30 Hz in the vertical z-axis direction, respectively. The installation of cable on the surge arrestor reduces the horizontal natural frequencies due to the constraint effect of the cable but cable tension has no effect on the natural frequency. Also, the natural frequency is proportional to the stiffness of the surge arrestor. This test result will be used for the seismic design and seismic capacity assessment of domestic substations and contribute to the stability of the electric power supply under earthquake event.

• The Korean Journal of Mycology
• /
• v.25 no.2 s.81
• /
• pp.111-120
• /
• 1997

The characteristics of monosporous isolates of winter mushroom [Flammulina velutipes (Curt. ex Fr.)] were investigated to obtain useful breeding materials. Within monokaryons from cultivars which have a white colored fruitbody showed narrow genetic variation, while domestic strains which have a brown colored fruitbody showed wide variation. The mating type of the white strains was A1A2B1B2 genotype, but that of the domestic brown strains were A3A4B3B4. In intra-crossing, the genetic stability of dikaryons mated by monokaryons from white strain was less than that of parents. While in brown strain, dikaryons with high yield and color variation were obtained.

• Animal cells and systems
• /
• v.3 no.4
• /
• pp.393-397
• /
• 1999

Length variations in human mitochondrial DNA (mtDNA) offer useful markers in the study of female aspects of human population history. One such length variation is a 9-bp deletion in the small noncoding segment located between the COII and Iysine tRNA genes (COII/tRNA/$^{Lys}$ intergenic region) which usually contain two tandemly arranged copies of a 9-bp sequence (ccccctcta) in human mtDNA. The mtDNA 9-bp deletion and polymorphic variants of expanded 9-bp repeat motif in the intergenic COII/tRNA$^{Lys}$ region have been found at varying frequencies among different human ethnic groups. We have examined the length variation of the mtDNA COII/tRNA$^{Lys}$ intergenic region from a total of 813 individuals in east Asian populations. The occurrence of the 9-bp deletion was found to be relatively homogeneous in northeast Asian populations (Chinese, 14.2%; Japanese, 14.3%: Koreans, 15.5%), with the exception of Mongolians (5.1%). In contrast, Indonesians (25.0%) and Vietnamese (23.2%) of the southeast Asian populations appeared to have relatively high frequencies of the 9-bp deletion. We identified the existence of a new expanded 9-bp repeat motif which likely resulted from a slipped mispairing insertion of six more cytosines in the intergenic COII$^{Lys}$ region. It was present at low frequencies in the Korean (2/349) and Japanese populations (2/147). Based on the results of this study, the Korean population may reflect a close genetic affinity with the Japanese and Chinese populations than the others surveyed east Asian populations.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.348-353
• /
• 1995

When cantilever beams rotate, their bending stiffnesses change due to the stretching caused by centrifugal inertia forces. Such phenomena result in variations of natural frequencies and mode shapes associated with constant speed rotational motions of the beams. These variations are important in many practical applications such as helicopter blades, turbomachines, and space structures. This paper presents the formulation of a set of linear equations governing the flapwise bending vibration of rotating cantilever beams. These equations can be used to provide accurate predictions of the variations of natural frequencies and mode shapes due to rotation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.645-653
• /
• 2001

It is well known that natural frequencies increase when a cantilever beam rotates about the axis perpendicular to its longitudinal axis. Such phenomena that are caused by centrifugal inertia forces are often referred to as the stiffening effects. Occasionally it is necessary to control the variation of a natural frequency or the maximum stress of a rotating beam. By changing the thickness of the rotating beam, the modal or the stress characteristics can be changed. The thickness of the rotating beam is assumed to be a cubic spline function in the present work. An optimization method is employed to find the optimal thickness shape of the rotating beam. This method can be utilized for the design of rotating structures such as turbine blades and aircraft rotary wings.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.107-114
• /
• 2007

In this paper, the equations of motion by which the natural vibration of rotating thick ring can be analyzed accurately are presented. These equations are derived from the theory of finite deformation and the principle of virtual work. The effects of variation in curvature across the ring cross-section can be considered in these equations. The ring models are called as thick ring model and thin ring model respectively as the effects of variation in curvature are considered or neglected. The radial displacement of ring which is rotating at constant angular velocity is determined by a non-linear equation derived from the principle of virtual work. The equations of the in-plane and out-of-plane vibrations at disturbed state are also formulated from the principle of virtual work. They can be expressed as the combination of the radial displacement at the steady state and the disturbed displacements about the steady state. The natural vibrations of rings with different thickness are analyzed by using the presented ring models and 3-dimensional finite element method to verify accuracy of the presented equations of motion. Its results are compared and discussed.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.643-648
• /
• 2000

It is well known that natural frequencies increase when a cantilever beam rotates about the axis perpendicular to its longitudinal axis. Such phenomena that are caused by centrifugal inertia forces are often referred to as the stiffening effects. Occasionally it is necessary to control the variation of a natural frequency of a rotating beam. By changing the thickness of the rotating beam, the modal characteristics can be changed. The thickness of the rotating beam is assumed to be a cubic spline function in the present work. An optimization method is employed to find the optimal thickness shape of the rotating beam. This method can be utilized usefully for the design of rotating structures such as turbine blades and aircraft rotary wings.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1331-1337
• /
• 2003

Linearized equations of motion for the vibration analysis of rotating cantilever plates with arbitrary orientation angle are derived in the present work. Two in-plane stretch variables are introduced to be approximated. The use of the two in-plane stretch variables enables one to derive the equations of motion which include proper motion-induced stiffness variation terms. The equations of motion are transformed into dimensionless forms in which dimensionless parameters are identified. The effects of the dimensionless parameters on the modal characteristics of rotating cantilever plates are investigated through numerical study. The natural frequency loci veering along with the associated mode shape variations, which occur while the rotating speed increases, are also presented and discussed.