• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.5
• /
• pp.1-17
• /
• 2014

Research was initiated to investigate early establishment characteristics and germination pattern of Kentucky bluegrass (KB, Poa pratensis L.) under natural room temperature and to analyze differences between alternative and natural conditions for a practical application. Fifteen cultivars of KB were evaluated in the study. Daily and cumulative germination pattern were measured and analyzed on a daily basis. Differences were observed in germination percentage, germination pattern, days to the first germination and days to 75% germination. Germination percentage was variable with cultivars at the end of study. It was 75.75 to 90.25% under natural condition. There were considerable variations in early germination characteristics and germination pattern among KB cultivars according to germination conditions. The first germination in all entries tested was initiated between 6 and 9 DAS (days after seeding) under ISTA (International Seed Testing Association) condition. But it was observed between 9 and 12 DAS under natural condition, being 3 to 5 days later as compared with ISTA condition. On the first date of a germinating process, the germination rate was 0.25% to 25.00% under ISTA condition, while 0.50% to 13.25% under natural condition. Days to the 75% germination were 15.08 to 28.80 DAS under ISTA condition and 17.78 to 28.75 DAS under natural condition. Midnight II, Excursion and Midnight were the fastest cultivars under ISTA condition, while Odyssey the fastest one under natural condition. Regardless of germination condition, the slowest cultivar was Voyager II, being over 4 weeks to 75% germination percentage. For the most cultivars, days to 75% germination under natural room temperature condition were 1 to 8 days slower than under ISTA condition. From this study information on differences in germination characteristics and pattern among cultivars would be usefully applied for KB establishment such as golf course construction. Prior to on-site seeding, a comprehensive germination test is practically recommended due to a possible decline in germination capability during domestic distribution and storage after import.

• Weed & Turfgrass Science
• /
• v.2 no.1
• /
• pp.47-54
• /
• 2013

The study was conducted to investigate early establishment characteristics and germination pattern of fine-textured fescues (FF) under natural room temperature and to analyze differences between alternative and natural conditions for a practical application. Six cultivars from Chewings fescue (CF), creeping red fescue (CRF), hard fescue (HF) and sheep fescue (SF) were evaluated in the study. Daily and cumulative germination pattern were measured and analyzed. Significant differences were greatly observed in germination pattern, days to the first germination, days to 60% germination, and germination percentage with environments, species and cultivars. Final germination rate was 29.7 to 80.0% under natural conditions. The first germination was initiated between 8 and 10 DAS (days after seeding) under natural conditions, being 3 to 4 days later as compared with ISTA conditions. Days to the 60% germination were 12.1 to 19.0 DAS, being 3.0 to 4.2 days slower than that under ISTA conditions. CF 'Jamestown II' was the fastest cultivar, while the slowest CRF 'Audubon'. Turf establishment speed was faster with CRF < SF < HF and < CF in order. Information on differences in germination characteristics and pattern between alternative and natural conditions would be practically useful for a golf course construction etc., when established with FF.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.425-430
• /
• 2019

Zinc coatings are widely used because of their environmental friendliness and high performance. In general, the coating temperature is a major factor in determining the coating layer thickness and coating quality. In the case of a zinc coating, a uniform and appropriate coating temperature is required. In this study, a thermal flow simulation of the air flow was performed to analyze the temperature distribution of a zinc spray coating room in a natural convection state. Using SolidWorks, modeling was performed for two spray coating rooms, a preheating room, and a drying room, and a thermal flow coupled analysis was performed using ANSYS-FLUENT. As a result of the analysis, the temperature distribution characteristics in the spray coating rooms were determined. It was found that the present temperature was below the target temperature of $25^{\circ}C$. Simulations were conducted for two different boundary conditions (one with a heater added and another with the open part closed). The simulation results show that the method of closing the open part is better than adding the heater.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.3
• /
• pp.23-38
• /
• 2015

The study was initiated with Kentucky bluegrass (KB, Poa pratensis L.) to investigate germination and early establishment characteristics of new cultivars for a practical application to turfgrass establishment such as parks, athletic field and golf course etc. Fifteen cultivars were evaluated in different experiments. An alternative condition for a KB germination test required by International Seed Testing Association (ISTA) was applied in Experiment I, consisting of 8-hr light at $25^{\circ}C$ and 16-hr dark at $15^{\circ}C$ (ISTA conditions). Experiment II was conducted under a room temperature condition of 5 to $25^{\circ}C$ (natural conditions). Seed germinating vigor, germination speed and germination peak time were measured in both experiments. Significant differences were observed in seed germinating vigor, germination speed and germination peak time. Seed germinating vigor was variable with different environments and cultivars. It was 75.25 to 89.50% under ISTA conditions and 75.75 to 90.25% under natural conditions. There were considerable variations in early germination characteristics among KB cultivars according to different environments. Early germination characteristics showed that all cultivars were 3 to 5 days faster in germination under ISTA conditions, when compared with natural conditions. The germination speed, measured as days to seed germination of 50% to 80%, was much faster with 'Midnight II', 'Excursion' and 'Midnight' under ISTA conditions. But it was faster with 'Midnight II', 'Excursion' and 'Odyssey' under natural conditions. Differences was also observed in germination peak time with cultivars and growing conditions. It ranged 5.94 to 14.88 days under ISTA conditions and 4.71 to 13.06 days under natural conditions. Regardless of the environment conditions, the shortest cultivars were 'Odyssey' and 'Midnight II'. The longest ones were 'Nuglade' under ISTA condition and 'Moonlight' under natural conditions. Considering germinating vigor, germination speed and germination peak time, 'Midnight II', 'Excursion', 'Midnight', and 'Odyssey' were regarded as excellent cultivars under ISTA conditions in terms of early establishment characteristics, while 'Midnight II', 'Excursion', 'Odyssey', and 'Courtyard' under natural conditions. These results suggest that an intensive germination test be needed prior to planting, for investigating the early germinating vigor, germination speed and germination peak time. Also, a proper cultivar selection and comprehensive site analysis for the growing environmental conditions should be done before turfgrass establishment such as golf course construction.

• KIEAE Journal
• /
• v.6 no.1
• /
• pp.57-62
• /
• 2006

Korean Traditional houses has been evolved and developed in many years, adopting the natural environment to control exterior conditions. These control method are various passive system of using natural materials, considering micro climate, building lay out, and these system are more natural and ecological to make the comfortable indoor climate than active systems of the present houses. This study aims to analyzed control performance of outdoor environment of five Korean traditional houses during the summer and winter. These houses are varied with lay out and floor plan to reflect the way of control for environmental condition, surveyed the reverberation time and sound level difference between rooms of the main living room and other main floored room, master room and kitchen. Especially air temperature and humidity have been measured simultaneously in each rooms to compare with outdoor condition. As a result, the variation of air temperature and humidity of most rooms are considerably static while condition of outdoors are much varied, it is showed that indoor climate has been controled with traditional soiled walls.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2251-2254
• /
• 2012

A rapid and practical green route for N-formylation of primary and secondary amines with formic acid at room temperature under the solvent-free conditions using HEU zeolite as a heterogeneous, reusable and highly efficient catalyst is described. The process is remarkably simple and environmentally benign. Excellent chemoselectivity was observed for the conversion of primary amines in the presence of secondary amines.

• Advances in nano research
• /
• v.6 no.1
• /
• pp.57-80
• /
• 2018

In this study, the thermal loading effect on free vibration characteristics of carbon nanotubes (CNTs) with multiple cracks is studied. Various boundary conditions for nanotube are taken in to account. In order to take the small scale effect, the nonlocal elasticity of Eringen is employed in the framework of Euler-Bernoulli beam theory. This theory states that the stress at a reference point is a function of strains at all points in the continuum. A cracked nanotube is assumed to be consisted of two segments that are connected by a rotational spring which is located in the position of the cracked section. Hamilton's principle is used to achieve the governing equations. Influences of the nonlocal parameter, crack severity, temperature change and the number of cracks on the system frequencies are investigated. Also, it is found that at room or lower temperature the natural frequency for CNT decreases as the value of temperature change increases, while at temperature higher than room temperature the natural frequency of CNT increases as the value of temperature change increases. Various boundary conditions have been applied to the nanotube.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.5
• /
• pp.79-91
• /
• 2008

Research was initiated to investigate germination characteristics of creeping bentgrass (CB, Agrostis palustris Huds.). Seven varieties of CB were evaluated with different experiments. An alternative environment condition requiring for a CB germination test by International Seed Testing Association (ISTA) was applied in the Experiment I, consisting of 8-hr light at $25^{\circ}C$ and 16-hr dark at $15^{\circ}C$(ISTA conditions). Experiment II was conducted under a room temperature condition of 5 to $25^{\circ}C$(natural conditions). In each experiment, data such as seed germinating vigor, early germination characteristics, germination speed and germination peak time were measured. Significant differences were observed in seed germinating vigor, early germination characteristics, germination speed and germination peak time. Seed germinating vigor was variable with different environments and varieties. It was 61.50 to 98.25% under ISTA conditions and 55.00 to 98.50% under natural conditions. There were considerable variations in early germination characteristics among CB varieties according to different conditions. Early germination characteristics indicated that all varieties were 1 to 4 days faster in germination under ISTA conditions, when compared with natural conditions. The germination speed, measured as days to seed germination of 70% and 90%, was much faster with Penn A-1, Penn A-4 and Penncross under ISTA conditions. But it was even faster with L-93 and Penncross when grown under natural conditions. Differences were also observed in germination peak time with varieties and growing conditions. It was 0.57 to 2.86 days under ISTA conditions and 0.74 to 1.74 days under natural conditions. Regardless of the environment conditions, the shortest variety was L-93 and the longest one T-1. Considering germinating vigor, early germination characteristics, germination speed and germination peak time, Penn A-1, Penn A-4 and Penncross were regarded as excellent varieties under ISTA conditions in terms of early establishment characteristics, while L-93, Penn A-1 and Penncross under natural conditions. These results suggest that an intensive germination test be needed prior to planting, for the early germinating vigor, germination speed and germination peak time. Also, a proper variety selection and comprehensive site analysis for the growing environmental conditions should be done before golf course construction.

• Asian Journal of Turfgrass Science
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2011

This study was conducted to investigate early germination characteristics and germination pattern of new cultivars of creeping bentgrass (CB, Agrostis pall/stris Huds.) under natural room temperature conditions and to analyze differences between alternative and natural conditions. Seven cultivars of CB were tested in the study. Daily and cumulative germination patterns were measured and analyzed on a daily basis. Significant differences were observed in germination pattern, days to the first germination, days to 50% germination, days to 85% germination, and germination rate among cultivars under different environments. The first germination in all entries was initiated between 4 and 5 days after seeding (DAS) under alternative conditions, while between 6 and 8 DAS under natural conditions, being 2 to 3 days later as compared with that of alternative conditions. As for the first germination percentage, it was generally 5 to 25% under alternative conditions. However, 'Penn A-1', 'Penncross', and 'Penn A-4' cultivars showed a vigorous germination, producing 50 to 70%. Under natural room temperature conditions, it was 5 to 10% for the most entries, except 'Penncross', 'L-93', and 'Penn A-4' cultivars which vigorously produced 20 to 50%. Days to the 50% germination in CB resulted in 4 to 10 DAS under alternative conditions, while 6 to 15 DAS under natural conditions, being 2 to 5 days later than under alternative conditions. Days to the 85% germination were 5.90 to 11.75 DAS under alternative conditions and 7.95 to 12.50 DAS under natural conditions. 'Penn A-1' and 'L-93' were the fastest cultivars under alternative and natural conditions, respectively. Regardless of the temperature conditions, the longest cultivar in germination was 'T-1', being over 11 DAS. In-depth comparative data on germination characteristics and germination patterns among CB cultivars would be usefully applied for a practical CB turf establishment in golf course construction etc.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.2
• /
• pp.111-120
• /
• 2004

The optimal design method of indoor thermal environment using CFD coupled simulation and genetic algorithms (GA) is developed in this study. CFD could analyze the thermal environment considering the distribution of temperature, velocity, etc. in a room. Therefore, It would be appropriate to use CFD for the optimal design method considering their distribution. In this paper, the optimal design means the most appropriate boundary conditions of the room among the conditions where the design target of indoor therm environment is achieved. Two step optimal indoor thermal environment design method is proposed. It includes the GA for searching the optimal indoor thermal environment design. To examine the performance of this method, the optimal design of hybrid ventilation system, which uses the natural cross ventilation and the radiation-cooling panel is conducted. The optimal design which satisfies the design target (thermal comfort, minimum cooling load, minimum vertical temperature difference) is found using two step optimal design method.