• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1948-1950
• /
• 2004

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.72-79
• /
• 2015

Electricity can be generated when the natural gas passes through a turbo-expander pressure reduction system at natural gas pressure reduction stations. Efficiency of the turbo-expander depends on the ratio of the natural gas flow rates to the design flow rate of the turbo-expander. Therefore, the optimal conditions for the operation of the pressure reduction system can be determined by controlling the natural gas flow rates. In this study, we have calculated the electric energy generation depending on the natural gas flow rates at the two low-pressure reduction stations when the pressure of the natural gas is reduced from 17.5 bar to 8.5 bar and have found the optimal conditions for the turbo-expander pressure reduction system through the comparison with the calculation results. The turbo-expander generates the electric power efficiently for the high natural gas flow rates which variations are slight. The determined design flow rate of the turbo-expander has the highest coverage of the natural gas flow rates. The electricity generation is calculated as much as 9 MW(B station) and 12 MW(D station) at each pressure reduction station.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1329-1334
• /
• 2006

The electrochemical reduction of coumarin, 7-acetoxy-4-methyl coumarin (AMC), and 7-acetoxy-4-bromomethyl coumarin (ABMC), in 0.1 M tetraethyl ammonium perchlorate/acetonitrile solution was carried out by direct current, differential pulse polarography, cyclic voltammetry, and controlled potential coulometry. The electrochemical reduction of ABMC was proceeded through three steps of electron transfer coupled with the chemical reactions. The color of solution was changed to yellow when the carbonyl group was reduced during 2nd step (-1.8 volts) and independented with cleavage of bromo group. Highest fluorescence intensity showed when the electrochemical reduction of AMC was controlled at near the potential (-2.3 volts vs. Ag/AgCl).

• Analytical Science and Technology
• /
• v.18 no.1
• /
• pp.89-95
• /
• 2005

Studies on the electrochemical reduction of 7-acetoxy-4-bromomethyl-coumarin (ABMC), 7-acetoxymethyl coumarin (AMC), and coumarin in 0.1 M tetraethyl ammonium perchlorate acetonitrile solution were carried out with direct current, differential pulse polarography, cyclic voltammetry, and controlled potential coulometry. The electrochemical reduction of ABMC was proceeded through three irreversible steps coupled with the chemical reactions. The solution color was changed to yellow when the carbonyl group was reduced during second step and the color change was independent with bromo group of ABMC. Fluorescent intensity was highest when the electrochemical reduction was controlled at near the overpotential of supporting electrolyte (-2.3 volts).

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.1-4
• /
• 2001

A new non-destructive fatigue prediction model of the composite laminates is developed. The natural frequencies of fatigue-damaged laminates under extensional loading are related to the fatigue lift of the laminates by establishing the equivalent flexural stiffness reduction as a function of the elastic properties of sublaminates. The flexural stiffness is derived by relating the $90^{\circ}$-ply elastic modulus reduction, and using the laminate plate theory to the degraded elastic modulus and the intact elastic modulus of other laminate. The natural frequency reduction model, in which the dominant fatigue mode can be identified from the sensitivity scale factors of sublaminate elastic properties, provides natural frequency vs. fatigue cycle curves for the composite laminates. Vibration tests were also conducted on $[\textrm{90}_{2}\textrm{0}_{2}]_s$ carbon/epoxy laminates to verify the natural frequency reduction model. Correlations between the predictions of the model and experimental results are good.

• International Journal of Automotive Technology
• /
• v.6 no.6
• /
• pp.591-598
• /
• 2005

A three-way catalyst system of a natural gas vehicle (NGV) has characteristics of higher fuel consumption and higher thermal load than a lean-bum catalyst system. To meet stringent emission standards in the future, NGV with the lean-bum engine may need a catalyst system to reduce the amounts of HC, CO and NOx emission, although natural gas system has low emission characteristics. We conducted experiments to evaluate the conversion efficiency of the NOx reduction catalyst for the lean-burn natural gas engine. The NOx reduction catalysts were prepared with the ${\gamma}-Al_{2}O_3$ washcoat including Ba based on Pt, Pd and Rh precious metal. In the experiments, effective parameters were space velocity, spike duration of the rich condition, and the temperature of flowing model gas. From the results of the experiments, we found that the temperature for maximum NOx reduction was around $450^{\circ}C$, and the space velocity for optimum NOx reduction was around $30,000\;h^{-1}$ And we developed an evaluation model of the NOx reduction catalyst to evaluate the conversion performance of each other catalysts.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.603-604
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.667-671
• /
• 2006

The new MPV-type reagents, B-acetoxydiisopinocampheylborane ($Ipc _2$BOAc) and B-trifluoroacetoxydiisopinocampheylborane $(Ipc _2BO _2CCF _3)$, have been prepared and their reducing characteristics in the reduction of carbonyl compound have been examined in order to find out a new reducing system with unique applicability in organic synthesis. In general, the reactivity of $Ipc _2BO _2CCF _3$ appears to be stronger than that of $Ipc _2$BOAc, presumably due to the acidity increase by the electron-withdrawing fluorine-substituent. Both reagents show an excellent selectivity in 1,2-reduction of $\alpha,\beta$-unsaturatedcarbonyl compounds and in competitive reduction between structurally different carbonyl compounds. In addition, $Ipc _2BO _2CCF _3$ shows interesting features in the stereoreduction of cyclic ketones.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.spc8
• /
• pp.3183-3186
• /
• 2011

• Bulletin of the Korean Chemical Society
• /
• v.3 no.3
• /
• pp.119-122
• /
• 1982

Rigid ${\alpha}$-oximino ketones containing two functional groups such as 2-oximino-1-acenaphthenone and 2-oximino-1-indanone were synthesized and the simultaneous reduction of the two functional groups of ${\alpha}$-oximino ketones by $LiAlH_4$ gave the corresponding amino alcohols, 2-amino-1-acenaphthenol and 2-amino-1-indanol. The yields of the reduction products of the ${\alpha}$ -oximino ketones remarkably increased, as the increase of molar ratio of hydride used to the reactant. The use of 24 moles of $LiAlH_4$ was found to afford the best result in the reduction of the rigid ${\alpha}$-oximino ketones to the corresponding amino alcohols. The yields was not affected by the variation of solvents such as ether, THF and diglyme.