• 제목/요약/키워드: Natural clay

검색결과 412건 처리시간 0.028초

Development of Ion Exchanger for Water Treatment (수처리를 위한 Ion 교환제의 개발)

  • 허남호;김상수;박병윤
    • Environmental Analysis Health and Toxicology
    • /
    • 제6권3_4호
    • /
    • pp.143-148
    • /
    • 1991
  • This study was carried out to develop the low-priced adsorbent by synthesizing the zeolite of high cation exchange capacity with the natural zeolite and to examine the adsorbing ability of this zeolite. The dominant clay minerals were clinoptilolite and mordenite in natural zeolite, while phillipsite in the synthesized zeolite. Adsorption reaction of $NH_4^{+}$on zeolite was reached equilibrium after 2 hrs. The amount of adsorption was increased with increasing the concentration of $NH_4^{+}$or the pH of suspension. The cation exchange capacity of zeolite was slightly decreased below pH 4.0 by acidic treatment. It was estimated that the ability of the synthesized zeolite to remove noxious ions was better than that of the natural zeolite.

  • PDF

Compressibility Characteristics of Pusan Clays (부산점토의 압축특성)

  • ;;Pham Huy Giao
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 한국지반공학회 2000년도 가을 학술발표회 논문집
    • /
    • pp.361-368
    • /
    • 2000
  • In other to examine the compressibility characteristics of cohesive soils in the mouth of the Nakdong river, the oedometer tests were peformed on undisturbed and reconstituted samples obtained by continuous boring typically at 3 different sites. It is meaningful to compare the consolidation behavior of natural clays with a reference state because the natural clays are depending on the stress history, sedimentary environment and geological history. In this study, the insitu state of the Pusan clays was investigated using the concepts of ISL(Nagaraj, 2000) and ICL and SCL(Burland, 1990). And for the purpose of confirming the existence of the underconsolidated clays, a standpipe type piezometer test and a dissipation test by piezocone were performed at their sites. Consequently, the Pusan clays were evaluated as normally consolidated clays.

  • PDF

천연 점토를 이용한 Pb(II)의 흡착에 관한연구

  • 김강우;이한섭
    • Journal of Environmental Health Sciences
    • /
    • 제27권2호
    • /
    • pp.138-144
    • /
    • 2001
  • This study was carried out to investigate characteristics and Pb(II) removal effect of natural clays in the batch mode test. The effect of parameters such as temperature, adsorption time and coexisting cations on the sorption ability and characteristics was investigated to find out whether the clays could be used as adsorbents. Several natural clays from domestic have been investigated to have high specific surface area and have minerals such as SiO$_2$ and $Al_2$O$_3$. As a result, removal effects of Pb(II) on clays were reached at equilibrium in aqueous solutions by stirring about 20 minutes. The removal effect of Pb(II) was best for Kang Jin clay than other clays in terms of fixed time. Adsorption efficiency was not influenced by the possibility of continuous treatment system of wastewater which contain heavy metals by using natural clays from domestic.

  • PDF

The Nature of Fungistasis in Sterile and Glucose-peptone Amended Soil on Helminthosporium victoriae and Mortierella n. sp. (살균토양(殺菌土壤), 자연토양(自然土壤) 및 Glucose-peptone으로 개량(改良)한 토양조건(土壤條件)이 Helminthosporium victoriae와 Mortierella n. sp.에 미치는 정균작용(靜菌作用))

  • Lee, Min-Woong;Choi, Hae-Jung
    • The Korean Journal of Mycology
    • /
    • 제10권3호
    • /
    • pp.119-124
    • /
    • 1982
  • The characteristics of the six different agricultural soil from Michigan were as follows. Colwood and Capac soil were loam, Gilford and Ceresco were sandy clay loam, Sission was clay loam, and Spinks was sandy loam. pH of Gilford sandy clay loam was 6.6 whereas that of the soil ranged $5.4{\sim}5.9$. Gilford sandy loam found to contain a relatively higher amount of organic matters as compared to other soils. Furthermore, the numbers of bacteria in Gilford sandy clay loam were significantly higher than those in other soils. The populations of fungi in Gilford sandy clay loam and Colwood loam soils were significantly greater than those in other soils. On the other hand, the densities of actinomycetes in Gilford sandy clay loam and Ceresco sandy clay loam soils were significantly different from those in other soils. The population of anaerobic bacteria varied depending on the soils; Ceresco sandy clay loam, Capac loam, Colwood loam soils have higher numbers of bacteria, whereas Gilford sandy clay loam was very lesser than the other soils. In the $^{14}C-glucose$ respiration by soil microorganisms after 10 hrs, the respiration rate was decreasing in the order of Ceresco sandy clay loam, Spinks sandy loam, Colwood loam, Sission clay loam, Capac loam and Gilford sandy clay loam. Germination of test propagules on natural soil soil was $0{\sim}5%$, and it was germinated $90{\sim}98%$ on autoclaved soil and PDA. The propagules differed in thier germination response to nutrients added to the soils. In general, more nutrients were required to promote germination on Capac loam and Gilford sandy loam soil than Spinks sandy loam soil. Especially Mortierella n. sp. required more nutrients for germination to obtain the same ratio as Helminthosporium victoriae.

  • PDF

Physicochemical and Archaeometric Characteristics of Goryeo Period Potteries from the Sandongri in Seosan, Korea (서산 산동리 고려시대 도기의 물리화학적 및 고고과학적 특성)

  • Lee, Chan Hee;Jin, Hong Ju
    • Journal of Conservation Science
    • /
    • 제32권2호
    • /
    • pp.123-139
    • /
    • 2016
  • The excavated potteries of Goryeo Period from the Sandongri archaeological site in Seosan were studied on physicochemical analyses. Surface color of the samples are mainly grayish blue, and showed the natural glaze by melting the body soils during the burning. Partly, swelling surface are observed bloated marks because of blow out gas by burning. The potteries are some possibility of making the similar source clay on the basis of magnetic susceptibilities (about $1{\times}10^{-3}SI\;unit$) and general occurrences. Values of specific gravity, apparent porosity and absorption ratio are divided two groups as highly different cases of bloating surface samples. The source clay of the potteries used mainly microcrystalline clay, the mineral compositions are quartz and some colored minerals. Based on the analysis, the burning temperature of the potteries are assumed that they were around $1,100^{\circ}C$ because detection of quartz and mullite within hard and compact matrices. As geochemical variations of the samples, evolution trends of rare earth, compatible and incompatible elements showed very similar patterns excepting the some major elements, that means the potteries are interpreted to making by elutriation processes using the same raw clays from very similar basement rocks of genetically.

Mineral Distribution in the Southeastern Yellow Sea Surface Sediments; KORDI Cruise Samples in 2010 (황해 남동부 표층 해양 퇴적물의 광물 분포; 2010년 한국해양연구원 탐사 시료)

  • Cho, Hyen-Goo;Kim, Soon-Oh;Yi, Hi-Il;Shin, Kyung-Hoon
    • Journal of the Mineralogical Society of Korea
    • /
    • 제24권3호
    • /
    • pp.205-216
    • /
    • 2011
  • Mineral compositions of 69 southeastern Yellow Sea surface sediments collected at the Korea Ocean Research and Development Institute (KORDI) cruise in 2010, were determined using the quantitative X-ray diffraction analysis. Southeastern Yellow Sea surface sediments are composed of major minerals (quartz 49.1%, plagioclase 13.0% and alkali feldspar 9.3%), clay minerals, calcite, and aragonite. Illite (9.4%) is the most abundant clay mineral, chlorite (4.6%) is the second, and kaolinite (0.8%) is few. Quartz and alkali feldspar contents are high in coarse-grained sediments, whereas amphibole and clay mineral contents are high in fine-grained sediments. Quartz, plagioclase, alkali feldspar, chlorite, and kaolinite contents are higher, and illite content is lower in mud zone 1 corresponding to south margin of Central Yellow Sea Mud than in mud zone 2, a part of Southeastern Yellow Sea Mud. Difference of mineral composition between two mud zone suggests that source of fine sediment may be different in two mud zone and Southeastern Yellow Sea Mud might be largely supplied from the Keum and Youngsan rivers in southern part of the west coast in the Korean Peninsula.

Characteristics of Unconfined Compressive Strength of Dredged Clay Mixed with Friendly Soil Hardening Agent (준설토와 친토양 경화재 혼합지반의 일축강도특성)

  • Oh, Sewook;Yeon, Yonghum;Kwon, Youngcheul
    • Journal of the Korean GEO-environmental Society
    • /
    • 제17권10호
    • /
    • pp.73-81
    • /
    • 2016
  • In the construction on low strength and high compressible soft ground, the many problems have been occurred in recent construction project. therefore, the soil improvement have been developed to obtain high strength in relatively short period of curing time. Based on the laboratory tests using undisturbed marine clay, the effect of improvement on soft ground was estimated. Deep mixing method by cement have been virtually used for decades to improve the mechanical properties of soft ground. However, previous researches set the focus on the short term strength the about 10% of cement treated clay. In this paper, cement and Natural Soil Stabilizer (NSS) were used as the stabilizing agent to obtain trafficability and mechanical strength of the soft clay. Based on the several laboratory tests, optimum condition was proposed to ensure the mechanical strength and compressibility as the foundation soil using cement and NSS mixed soil. Finally, research data was proposed about the applicability of NSS as the stabilizing agent to soft clay to increase the mechanical strength of soil.

Analysis of Consolidation and Shear Characteristics for the Kwangyang Bay Clay (실내시험을 통한 광양만 점토의 압밀 및 전단특성분석)

  • 이영휘;김용준;김대길
    • Journal of the Korean Geotechnical Society
    • /
    • 제15권1호
    • /
    • pp.151-160
    • /
    • 1999
  • A series of laboratory tests for the marine clay sampled under the sea of Kwangyang bay have been conducted. The main types of tests are the general index property tests, the oedometer tests and the triaxial compression tests in both undrained(CIU) and drained(CID) conditions. The clayey samples, classified as CL, CH with natural water content of 38.3~84.6% and liquidity index of 0.71~0.98, are in the normally consolidated state with O.C.R. of 1.0l~l.60. The undrained stress path from CIU tests can be normalized with isotropic consolidation pressure$(p_0)$ and equal shear strain contour is linear passing through the origin in the (q, p) plot. The undrained shear strain is found to be the only function of the stress ratio($\eta$) and linear with intercept in the ($\varepsilon/\eta,\eta$) plot. The built-up pore pressure normalized with pc is also linear with respect to $\eta$. and its slope is defined by ´C´ as a pore pressure parameter. Equations to predict the undrained stress path and the shear strain are proposed. It is proved that the proposed equations give better agreements to the measured values than the Cam-clay theories. The failure points of the stress path are located on the same C.S.L. in (q, p) plot during both CIU and CID tests, which justifies the concept of critical state theory.

  • PDF

Fabrication of Calcined Clay Granule Comprising Zeolite (제올라이트를 함유하는 소성점토의 제조)

  • Kim, Byoung-Gon;Lee, Gye-Seung;Park, Chong-Lyuck;Jeon, Ho-Seok;Jeong, Soo-Bok
    • Korean Journal of Soil Science and Fertilizer
    • /
    • 제41권4호
    • /
    • pp.239-246
    • /
    • 2008
  • This research tried to find out the optimum fabrication method of calcined clay granules comprising zeolite. Kaolin clay and natural zeolite powder were used as raw materials of calcined clay, and silica stone powder was used for controlling the porosity of the granules. The granulation was performed with two kinds of granulators: a pan granulator and a high-shear mixer granulator. Various granules were fabricated by the mixing ratios and the rotation speeds of the granulators, and were heated from 400 to $700^{\circ}C$ at $100^{\circ}C$ interval. The crushing strength, pore size distribution, and CEC of the granules were measured. The evaluation method for the resistance of granules to human treading was created and the tests were conducted at dry and wet conditions. The resistance and crushing strength improved in proportion to the rotation speed of the granulator and the heating temperature, but the CEC decreased. The pellet made by the pan granulator did not have the strength against treading upon heating to below $700^{\circ}C$, but the pellet made by the high-shear mixer granulator endured the treading test upon heating to over $500^{\circ}C$

A Comparative Study on Absolute and Relative Clay Mineral Composition of the Surface Sediments around the Jeju Island (제주도 주변해역 표층퇴적물의 점토광물 절대함량 및 상대함량 비교연구)

  • Moon, Dong-Hyeok;Cho, Hyen-Goo;Yi, Hi-Il
    • Journal of the Mineralogical Society of Korea
    • /
    • 제23권1호
    • /
    • pp.15-23
    • /
    • 2010
  • The absolute clay mineral compositions and regional distribution of the 131 bulk marine surface sediments around the Jeju Island was compared to their relative compositions and distribution using quantitative X-ray diffraction analysis. Average absolute clay mineral composition is illite 15.3% (0.5~40.5%), chlorite 2.6% (0~7.9%), and kaolinite 1% (0~5.6%). Total contents of the clay minerals are very high in the South Sea of Korea, northwestern part and southern offshore of Jeju Island. The average relative composition is illite 70.9% (16.7~89%), chlorite 21.5% (8.4~68.5%), and kaolinite 7.6% (0~29.3%). Relative illite contents are high in the northwestern and southeastern part of study area, and southern part of Jeju Island. Chlorite contents are high in the eastern part of study area and western part of Jeju Island. Kaolinite contents are high in the western and southern part of Jeju Island, and southern offshore of Jeju Isand. Absolute Distribution patterns are very similar to those of fine-grained (from clay to silt) sediment, whereas relative distribution patterns do not show any relationship with those of fine-grained sediment.