• 제목/요약/키워드: Natural Gas Engine

검색결과 241건 처리시간 0.029초

양방향 스털링엔진의 선형발전기 설계에 관한 연구 (A Study on Design of the Linear Generator in the Double Acting Stirling Engine)

  • 박성제;고준석;홍용주;김효봉;염한길;인세환
    • 한국수소및신에너지학회논문집
    • /
    • 제26권6호
    • /
    • pp.638-644
    • /
    • 2015
  • This paper describes the continuing effort to analysis and design on dynamic and electrical behavior of gamma-type free piston Stirling engine/generator with dual-opposed linear generator for domestic micro-CHP (Combined Heat and Power) system. The double acting Stirling engine/generator has one displacer and two power piston which are supported by flexure springs. Two power pistons oscillate with symmetric sinusoidal displacement and are connected with moving magnet type linear generators for power generation. To operate Stirling engine/generator, combustion heat of natural gas is supplied to hot-end and heat is rejected from cold-end by cooling water. The temperature difference across the displacer induces the oscillating motion, and it can be explained with mass-spring vibration system. The purpose of this paper is to describe the design process of linear generator for the double acting free-piston Stirling engine.

HCNG 엔진에서 압축비 변경에 따른 성능 및 노킹 특성 연구 (Study of Performance and Knock Characteristics with Compression Ratio Change in HCNG Engine)

  • 임기훈;이성원;박철웅;최영;김창기
    • 대한기계학회논문집B
    • /
    • 제37권4호
    • /
    • pp.387-394
    • /
    • 2013
  • 온실가스인 $CO_2$ 배출을 줄이기 위한 연료로서 고효율 연소의 특성을 갖는 수소-천연가스 혼합연료(HCNG)가 유력한 미래 대체연료로서 주목받고 있다. 일반적으로 엔진에서의 압축비 상승은 효율 향상 및 이산화탄소 배출 저감을 위한 방법 중의 하나로서 HCNG 엔진에서도 고압축비의 적용이 효과적일 수 있으나, 수소의 높은 연소 속도 및 화염 온도로 인한 조기착화, 노킹 등의 이상연소는 엔진 부품의 파손 및 출력 저하를 초래할 수 있다. 본 연구는 HCNG 엔진에서 압축비를 변경하여 엔진 성능 및 노킹 특성을 분석하는데 목적이 있다. 기존의 CNG 엔진에 CNG 및 HCNG 연료를 적용하여 공기과잉률의 변화에 따른 연소 특성을 분석하고, 압축비 변경 후 엔진의 성능에 미치는 영향을 파악하였다.

정상 및 비정상 온도변화에 따른 린번 천연가스 자동차용 촉매의 정화성능 (Conversion Efficiency of Catalyst for Lean-bum Natural Gas Vehicles with Steady and Unsteady State Temperature Change)

  • 최병철;정우남;박봉애;이춘희;이장희;윤 정 의
    • 한국자동차공학회논문집
    • /
    • 제13권3호
    • /
    • pp.123-130
    • /
    • 2005
  • In this study, we evaluated the CH4 and CO conversion efficiencies over the oxidation catalysts for natural gas vehicle with lean-burn system. On the fresh catalyst, the conversion efficiency was increased when the loading of precious metal was increased. On the aged catalyst, the conversion efficiency was decreased as increasing the excess air ratio. We could confirm the measuring conversion efficiency of the unsteady state with the FTIR and that of steady state with the GC The temperature increasing ratio of unsteady state is acceptable from 3$^{\circ}C$/min. to 15$^{\circ}C$/min. for the evaluation of catalyst conversion performance , which has within the 4$\%$ of the difference of conversion efficiency. We observed a physical behavior of the thermal aged catalyst's surface using TEM and BET device. It was found that the precious metal was grown to the micro-scopic size by thermal aging process.

저부하 라디칼 착화 압축천연가스 엔진의 성능연구 (Study on the Combustion Characteristics of Light-Load RI-CNG Engine)

  • 류우;동용;염정국;정성식
    • 동력기계공학회지
    • /
    • 제15권1호
    • /
    • pp.11-17
    • /
    • 2011
  • 본 연구는 라디칼 착화(Radical Ignition이하 RI) 기술을 적용한 부실직분식 CNG(Compressed Natural Gas) 엔진의 구동특성에 관한 것이다. 실험엔진은 단기통 디젤엔진을 개조하여 사용하였으며, 이는 부실식 디젤엔진처럼 연소실이 주실과 부실로 나누어져 있다. 부실에 분사된 CNG는 스파크플러그로 점화하며, 부실로 부터의 연소가스가 주실 희박 혼합기를 시켜 구동하는 엔진이다. RI 기술은 연소속도를 향상시킬 수 있다. 본 연구는 주로 저부하 RI-CNG 엔진의 성능을 연구하였다. 연료분사기간은 9 ms, 공기과잉률은 1.0, 1.2, 1.4로 하였다. 연료분사시기는 엔진의 배가밸브가 닫히는 ATDC $20^{\circ}CA$ 부터 $120^{\circ}CA$ 사이로, $20^{\circ}CA$ 간격으로 지각시켜 가며 실험하였다. 본 연구는 연료분사시기 및 공기과잉률이 연소최고압력 ($P_{max}$), 연소최고압력시기(${\Theta}_{pmax}$), 도시평균유효압력(IMEP), 사이클 변동계수($COV_{imep}$), 연소속도에 미치는 양향 등을 구하고 분석하였다.

석유정제산업 공정과 공정장비에 기인한 휘발성 유해 대기오염물질(HAPs)의 배출량 산정기법 (Estimation Technique of Volatile Hazardous Air Pollutants(HAPs) Emitted from Petroleum Industrial Process/Equipment)

  • 조완근;권기동;동종인;강경희
    • 한국환경과학회지
    • /
    • 제13권7호
    • /
    • pp.703-710
    • /
    • 2004
  • Petroleum refineries have been considered as an important emission source for atmospheric volatile hazardous air pollutants(HAPs). The emission source includes petroleum refinery processes and process equipment. The control strategy for volatile HAPs requires emission estimations of these pollutants. However, systematic methods of volatile HAPs emission from petroleum refineries have not yet been established. Accordingly, present study surveyed the estimation method of volatile HAPs emitted from the petroleum refinery processes and process equipment. The emission estimation methods for the petroleum refinery processes are applied for 11 petroleum refining facilities: fluidized catalytic cracking, thermal cracking, moving bed catalytic cracking, compressed engine, blowdown system, vacuum distilled column condensator, natural gas or distilled boiler, natural gas or distilled heater, oil boiler, oil heater and flare. Four emission estimation methods applied for the petroleum refinery process equipment are as follows: average emission factor approach, screening ranges approach, EPA correlation approach and unit-specific correlation approach. The process equipment for which emission factors are available are valves, pump seals, connectors, flanges and open-ended lines.

Ni, Ru-ZSM-5를 첨가한 NSR 촉매의 NOx 정화 특성 (Characteristics of NOx Reduction on NSR(NOx Storage and Reduction) Catalyst Supported by Ni, Ru-ZSM-5 Additives)

  • 최병철;이춘희;정종우
    • 한국자동차공학회논문집
    • /
    • 제15권5호
    • /
    • pp.105-111
    • /
    • 2007
  • In this study, we investigated the conversion performance of de-NOx catalyst for lean-burn natural gas engine. As a de-NOx catalyst, NOx storage reduction catalyst was composed of Pt, Pd and Rh with washcoat including Ba and Ni, Ru-ZSM-5. Ni, Ru-ZSM-5, which was regarded as a NOx direct decomposition catalyst, was made up of ion exchanged ZSM-5 by 5wt.% Ni or Ru. The performance of de-NOx catalyst was evaluated by NOx storage capacity and catalytic reduction in air/fuel, $\lambda=1.6$. The catalytic reaction was also observed when the added fuel was supplied to fuel rich atmosphere by fuel spike period of 5 seconds. The NOx conversion of the catalysts with Ni-ZSM-5 or Ru-ZSM-5 was mainly caused by the effect of NOx adsorption of Ba rather than the catalytic reduction of Ni, Ru-ZSM-5. Ni, Ru-ZSM-5 catalysts can not use for the NSR catalyst because they have quick process in thermal deactivation.

액체메탄엔진용 믹싱헤드 일체형 다중점화장치 (A Mixing Head Integrated, Multi-Ignition Device for Liquid Methane Engine)

  • 임병직;이준성;이기주;박재성
    • 한국추진공학회지
    • /
    • 제26권3호
    • /
    • pp.54-65
    • /
    • 2022
  • 2단형 소형위성발사체 상단 메탄엔진에 다중점화가 가능한 간결한 점화기를 개발하고 있다. 첫 번째로 적층제조 기술을 활용하여 믹싱헤드와 일체형으로 다중점화장치를 설계 및 제작하였다. 두 번째로 연소기 헤드에 공급되는 점화 추진제를 주-추진제 배관에서 분기하여 공급함으로써 점화가스 저장을 위한 별도의 고압 용기가 필요없다. 1톤급 액체산소/액체메탄 엔진 연소기 헤드에 일체형으로 고안된 신규 점화기에 대해서 점화기 단독시험, 연소기 점화시험 및 연소기 성능시험 등의 다양한 시험을 수행하였고, 안정적인 점화 성능을 확인하였다.

Trigeneration 제습공조시스템과 일반공조시스템의 성능 비교 실험 및 수치해석 (An Experimental and Numerical Analysis on Performance Comparison of a Trigeneration Desiccant System and Conventional Air-conditioning System)

  • 김형태;채정민;조영아;박소진;송근수
    • 한국가스학회지
    • /
    • 제22권3호
    • /
    • pp.32-37
    • /
    • 2018
  • 최근 정부의 미래에너지변환 정책에 따라 천연가스를 활용한 분산발전 시장은 점차 확대될 것으로 예상된다. 분산발전은 전력 수요지 주위의 소규모 발전원을 활용하는 발전방식으로 송배전 인프라 구축 비용과 운용비용, 전력손실을 줄일수 있는 장점이 있다. 천연가스를 이용한 분산발전의 대표적인 예로 Trigeneration System이 있다. 본 연구에서는 Trigeneration System에서 발생되는 냉열 및 엔진 배열을 이용하여 공조대상 실내의 습공기를 제습/냉방/난방 하는 제습공조시스템의 성능 분석에 대한 기초 연구를 수행하였다. 연구결과 제습공조시스템 입출구 온도차가 커질수록 시스템 효율은 높아지고 일반공조시스템 대비 에너지 소비량이 감소하는 것을 알 수 있었다.

발전용 합성가스 엔진의 수소 혼합 비율에 따른 연소 특성 연구 (A Study on the Combustion Characteristics of a Generator Engine Running on a Mixture of Syngas and Hydrogen)

  • 박승현;박철웅;이선엽;김창기
    • 대한기계학회논문집B
    • /
    • 제35권7호
    • /
    • pp.693-699
    • /
    • 2011
  • 바이오매스나 기타 유기성 폐기물로부터 가스화공정을 거쳐 얻을 수 있는 합성가스는 환경보호와 화석연료고갈 방지 측면에서 유망한 대체연료 중 하나로 여겨지고 있다. 그러나 가스화로부터 얻어지는 합성가스는 일반적인 천연가스와 같은 가스연료에 비해 발열량이 낮고 연료조성이 불균일하여 내연기관에 적용시 안정적이고 지속적인 운전이 어렵다는 단점이 있다. 따라서 본 연구에서는 이러한 저발열량과 불균일한 가스 조성의 특징을 가진 합성가스가 연소에 미치는 영향을 파악하여 고효율의 엔진을 개발하고자 연구를 수행하였다. 저발열량의 합성가스를 모사하기 위하여 천연가스에 질소를 희석한 연료를 사용하였다. 또한 체적당 발열량을 유지하면서 동일유량조건으로 합성가스에 수소 혼합비율을 10 ~ 30%로 변화시키면서 연소 특성 변화를 살펴보았다.

온도조건 비영향형 복합재생방식 DPF의 실차적용을 통한 대형디젤기관의 배출가스 특성 연구 (A Study on Exhaust Gas Characteristics of Heavy-duty Diesel Engines through Actual Vehicle Application of Non-influenced Temperature Condition Type Active Regeneration Method)

  • 이윤철;오상기
    • 한국분무공학회지
    • /
    • 제29권2호
    • /
    • pp.53-59
    • /
    • 2024
  • Cars are one of the main causes of air pollution in large cities, and 34.6% of domestic air pollution emissions come from mobile sources, of which cars account for 69.6%. In particular, the importance of nitrogen oxides (NOx) and particulate matter (PM), which are major pollutants in diesel vehicles, is increasing due to their high contribution to emissions. Therefore, in this study, the problem of natural regeneration caused by low exhaust gas temperature during low speed and low load operation was solved by applying a complex regeneration DPF that is not affected by temperature conditions to large diesel vehicles with higher driving time and engine displacement than small and medium-sized vehicles. And the feasibility of application to large diesel vehicles was reviewed by measuring the emission reduction efficiency. As a result of the reduction efficiency test on the actual vehicle durability product, PM showed a reduction efficiency of 84% to 86%, and the reduction efficiency of gaseous substances showed a high reduction efficiency of over 90%. The actual vehicle applicability test was completed with three driving patterns: village bus vehicle, police car, and road-going construction equipment vehicle, and no device problems occurred until the end of the test. Both load and no-load smoke measurement results showed a smoke reduction efficiency of over 96%.