• Journal of Food Hygiene and Safety
• /
• v.12 no.1
• /
• pp.15-19
• /
• 1997

The stability of monascin yellow pigment isolated from Monascus purpureus was determined over a period of storage for the wide range of pH, various metal ions and antioxidants. The absorption maximum of monascin pigment was 385 nm. Monascin pigment was more stable in acid solutions than in alkaline (pH 9 and pH 11) during storage period. It was also observed the reduction of absorption was occur after 3 days storage. The stability of monascin pigment was not changed by adding the various metal ions of the concentration of 10-4 M, however, it was unstable by adding the Zn2+, Al3+ and Fe3+ of 103- M concentration. The antioxidants. BHA, BHT, cysteine and L-ascorbic acid, have no effects on the stability of monascin yellow pigment. Thus, it may be concluded that the monascin pigment is stable and useful food additives as the natural colorant except for the alkaline food and food containing the Zn2+, Al3+ and Fe3+.

• The Korean Journal of Food And Nutrition
• /
• v.6 no.4
• /
• pp.322-328
• /
• 1993

A study of general characteristics of acetone extracted pigment from the cell mass of Rhodospirillum rusrum DSM 467 was carried out for the development of natural food colorant. Through visible absorption scanning, it showed seven absorption peaks at 355, 410, 529, 624, 680 and 747nm, and it was shown to be yellow color. In acidic and neutral conditions, the color was yellow, while in the alkaline condition it was greenish yellow. This pigment was stable at pH range between 3.0~10.0, and below 4$0^{\circ}C$. In the presence of light and oxygen, the stability of pigment rapidly degraded and it became unstable in the presence of metal ions such as Cu2+, Al3+ and Fe3+. Through TLC analysis, it was shown to be composed of seven color fractions.

• Nutrition Research and Practice
• /
• v.2 no.1
• /
• pp.46-49
• /
• 2008

Anthocyanin pigments from varieties of black, red and wild rice were identified and quantified to evaluate their potential as nutritional function, natural colorants or functional food ingredients. Anthocyanin extraction was conducted with acidified methanol with 0.1M HCl (85:15, v/v) and identification of anthocyanin, aglycone and sugar moieties was conducted by comparison with purified standards by HPLC, Ultraviolet-Visible absorption spectrophotometer and paper chromatography. Black and wild rice showed three different types of pigments by HPLC whereas red rice variety did not show any anthocyanins. Out of three pigments detected, one (peak 2) was characterized as cyanidin-3-glucoside (C3G) by comparison of spectroscopic and chromatographic properties with an authentic standard, and another (peak 3) was tentatively identified as cyanidin-fructoside on the basis of spectroscopic properties with ${\lambda}_{max}$ of aglycone in 1% HCl methanol at 537 nm, electrospray ionization mass spectra with major ions at 449 and 287 m/z and chromatographic properties. But another pigment (peak 1) has not been characterized. The most abundant anthocyanin in black and wild rice was C3G.

• The Research Journal of the Costume Culture
• /
• v.23 no.5
• /
• pp.768-777
• /
• 2015

In this study, the dyeing of silk fabric with Polygonum cuspidatum extracts was investigated. The contents of this study are as follows. First, the proper dyeing conditions were investigated by measuring the dye uptake (K/S value) that depended on the dyeing conditions when silk fabric was dyed with Polygonum cuspidatum extract. Second, the brightness (L), hue, and chroma differences that appear after mordanting with Al, Cu and Fe were investigated by measuring the CIELAB and Munsell values. And third, the colorfastness and antibacterial property were measured. When the silk fabric was dyed with Polygonum cuspidatum extract, the proper dyeing conditions were a colorant concentration of 90% v/v, a dyeing of time 100 minutes, a dyeing temperature of $70^{\circ}C$, and a dyeing of pH 3. In mordanting methods, the dyeabilities of post-mordanting were higher than those of premordanting. The hue value displayed yellow (Y) and yellow-red (YR) in cases of pre and post mordanting. The C value decreased by the mordanting of Polygonum cuspidatum extracts. Generally the colorfastness of mordanted fabrics was improved by mordanting. The dyed fabrics showed a 90.6% of Staphylococcus aureus reduction rate, and the dyed and mordanted fabrics showed 97.1% bacteria reduction rate. The dyed and mordanted fabrics showed above 90.5% Klebsiella pneumoniae reduction rate, and Cu mordant revealed the most effective bacterial reduction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1520-1526
• /
• 2005

Henna is a natural colorant and has been used to dye hair, skin and leather since civilization began. It has reddish brown to orange shade. The major color components of Henna are Lawsone(2-hydroxy-1,4-naphthaquinone) and Luteolin (3',4',5,7-tetrahydroxy-flavone). In this study, various fibers containing the nitrogen component, especially used fur underwear, were dyed with Henna under various dyeing conditions, then dyeing characteristics, color fastness, and anti-bacterial properties were evaluated. from the results, Henna has good affinity to the chlorinated wool>wool>Pu/nylon>nylon>soybean>silk in decreasing order. The color fastness of the wool fabric dyed with Henna to washing, dry-cleaning, and perspiration showed 4-5 grade. The color fastness to light was 3rd grade. These results are relatively good comparing with other natural dyes. Moreover dyed fabric with Henna showed excellent antibacterial activity.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.74-86
• /
• 1995

Antibacterial and deodorization properties of silk fabrics dyed with Sappan wood are investigated by Halo, Shake flask, Bioassay and Detection column methods.The results are obtained as follows; 1. Although K/S values increase with Al mordant and concentrate concentrations, these are decreased in 10% Al mordant concentration in case of 4mlg dye concentration. 2. Reduction ratios of bacteria increase with K/S values in various tests. 3. When undyed silk fabrics are treated with Al mordant, reduction ratios of bacteria are not varied with Al mordant concentrations. 4. Deodorization property of Al pre-mordanted dyeing silk fabrics is better than one of unmordanted dyeing and raw silk fabrics. 5. Antibacterial properties of Cu and Cr mordanted dyeing fabrics are better than ones of the dyeing fabrics treated with the other mordants. 6. Natural dyes extracted from Sappan wood show the good antibacterial and deodorization properties, and colorant among various components contained in Sappan wood has a excellent antibacterial and deodorization properties.

• Journal of Life Science
• /
• v.25 no.8
• /
• pp.896-902
• /
• 2015

This study was conducted to evaluate the substitution effect of red beet powder on sodium nitrite in emulsion-type pork sausages, and to investigate the effect of the addition of red beet powder on the physicochemical characteristics of emulsion-type pork sausages at 10℃ for 6 weeks. The treatments were divided into five groups: Control (sodium nitrite 0.01%), T1 (sodium nitrite 0.005% + red beet powder 0.5%), T2 (sodium nitrite 0.005% + red beet powder 0.25%), T3 (red beet powder 0.5%), and T4 (red beet powder 0.25%). In the CIE^*I didn’t delete this asterisk (*) because it might be a marker for something you wish to add later, but please note that if there is no significance for the asterisk, it should be removed as a typographical error. color of emulsion-type pork sausages, the lightness value of the control was significantly higher than for the other groups (p＜0.05). The redness value was higher in T1, whereas the yellowness value was higher in the T3 and T4 groups compared with the others (p＜0.05). The pH values of emulsion-type pork sausages were significantly decreased in the T3 and T4 groups by the addition of red beet powder (p＜0.05). However, the DPPH radical-scavenging activity was higher in the T1 and T3 groups than in the others (p＜0.05). The residual nitrite ion was the highest in the control group (p＜0.05). Therefore, it is determined that red beet powder can substitute for nitrite as a natural colorant, and it has a slightly antioxidant effect in emulsion-type pork sausages.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.1014-1023
• /
• 2010

This study was performed to evaluate the quality characteristics of low-fat boiled or smoked sausages containing sodium nitrite and various levels of red beet during refrigerated storage. Physicochemical properties of boiled and smoked sausages were not affected by the addition of red beet (p>0.05), except for the color values. The interaction between treatment and storage time had significant effects on redness and yellowness of boiled sausages, and on redness of smoked sausages (p<0.05). Boiled sausages containing more than 0.5% red beet decreased lightness and increased redness and yellowness (p<0.05). During storage time, redness decreased and yellowness increased (p<0.05). The combination of sodium nitrite with red beet was better than red beet alone for color stability. In the smoked sausages, addition of red beet decreased lightness, but redness (p<0.05), unlike the boiled sausages, did not change. Redness of sausages containing red beet alone decreased with increased storage time (p<0.05), but there was no change (p>0.05) upon treatment with the combination of sodium nitrite and red beet. These results indicate that the combination of red beet and sodium nitrite contributed to color stability of smoked sausages during refrigerated storage. Therefore, we suggest that red beet as a natural colorant may be used to reduce the content of nitrite during low-fat sausage processing.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.4
• /
• pp.660-666
• /
• 2015

Natural food colorant are widely used to satisfy consumer preferences. Anthocyanins are red, blue and purple natural pigments. Purple-fleshed sweet potato (PSP) contains large quantities of anthocyanins. The aims of this work were i) to investigate the influence of sugars on the purple color of PSP jam and ii) to optimize the ratio of ingredients for sensory characteristics of PSP jam. Korean PSP variety "Sinjami" was used for the preparation of jam. The jams were prepared with various sugar contents (0, 20, 30, 40 and 50% total weight) consisting of steamed purple-fleshed sweet potato, water, lemon juice and apple juice. With increasing sugar contents, lightness (L) and redness (a) of PSP jams decreased while yellowness (b) increased, indicating that anthocyanins were degraded and/or brown pigments were formed due to high sugar content under heat treatment. Hardness, springiness, chewiness and cohesiveness showed significant differences among PSP jams with various sugar contents. In sensory evaluation, addition of sugar significantly increased scores for color and texture as compared to control samples. The color, texture and preference results indicate an optimal sugar content of 40% total ingredient weight for PSP jam.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.149-152
• /
• 2001

Extraction characteristics of anthocyanin pigment from red flower cabbage(Brassica oleracea L. var. acephala) as a new source of natural food colorant were investigated. The pigment extracted from red flower cabbage showed the characteristic bathochromic shift of the maximum wavelength of light absorption(${\lambda}_{max}$) as pH of the solution changed from pH 1 to 12. As the concentration of citric acid in the extraction solvent increased, extraction rate and total optical density(TOD) of the extract increased. Maximum TOD was obtained by using the extracting solvent including $0.8{\sim}1.0%$ citric acid and stable pigment solution was obtained by using the extracting solvent including $10{\sim}20%$ ethanol in distilled water. As a result, 10% ethanolic solution with 0.8% citric acid was decided as the optimum extraction solvent for the anthocyanin pigment from red flower cabbage. Within the experimental ranges, the extraction rate increased and therefore extraction time decreased as the extraction temperature increased. The times to reach a certain value of TOD i.e., 2.1 were 24, 8, 4 and 2 hours at extraction temperature of 5, 20, 40 and $60^{\circ}C$, respectively.