• Journal of Korean Academic Society of Home Health Care Nursing
• /
• v.8 no.1
• /
• pp.50-61
• /
• 2001

With the improvement of current medicine, the number of the chronicly ill children are increasing. The illness of the child drives all of the family to despair. especially it is a burden on the mother who takes care of the ill child. She's faced with many emergencies and feels powerless. The home care for a child is for finding a child's problems early and mediating them. The purpose of this study was to investigate the mother's reaction following their chronicly ill child's discharge and to investigate the supporting needs for caring for an ill child. The subjects of this study were mothers with a chronicly ill child being discharged from a general hospital in Seoul and the data was collected from July 20 to September 30. Data was collected by using questionnaires which were developed by the researcher. (The questionnaires were composed of the average 5 points - Likert's method). The Mother's reaction means that the higher the score, the more negative the mother's thoughts about discharge are. Supporting need for caring for ill an child means that the higher the score, the higher the demand of nursing is. The statistical analysis used the SPSS program for t-test. ANOVA, and Pearson Correlation. The results of this study were as follows: 1. The mother's reaction scores following discharge were the lowest. 19 and the highest 72 so that the total average was 43.15. The answer, 'I worry that my baby will be troubled with illness again after discharge gained the high points (3.94 of 5 points). The answer. 'The discharge of my baby makes me gloomy' gained 2.05-it was the lowest points. Their were significant differences according to religion (p=.006). salary (p=.050). the burden of the medical fee (p = .005) and caregiver (p=.027). 2. Supporting Need for caring for ill an child was the lowest 15 and the highest 67. the total average was 47.87. The answer. 'I'd be glad to get a person whom I could always get counsel about the health of my baby with' scored the high point (average 4.04 of 5). The answer. 'Caring for my baby at home makes me exhausted' gained the lowest point. 2.49. Their were significant differences according to religion (p=.019) and diagnosis (p=.019). 3. The relationship between the reaction of the mother and supporting need for caring for an ill child was a positive correlation (r=0.585). In conclusion. this study revealed that mothers weren't positive about their chronicly ill child's discharge and they wanted to get support for caring for an ill child. Through this study. I proposed that the program to support the chronicly ill child at home and home care by continuous counselling after discharge should be develop.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.732-740
• /
• 2019

Evaporative humidification using a humidifying element is widely used for humidification of a building or a data center. The performance of a humidifying element is commonly expressed as humidification efficiency, which is used independent of air temperature, humidity and water temperature. In this study, a series of tests were conducted at two air conditions (data center and commercial building) using two different humidifying elements (cellulose/PET and Glasdek) changing the frontal air velocity and water temperature. Results showed that the measured humidification efficiency was dependent on the air condition and water temperature. In fact, even dehumidification occurred at the inlet of the humidifying element at the air condition of commercial building. The reason was due to the inlet water temperature, which was lower than the dew point air temperature. As the difference between the inlet water and the dew point air temperature increased, the humidification efficiency decreased. This suggest that proper thermal model should account for the inlet region, where the amount of moisture transfer may be different from the other part of the humidification element. A simple analysis on the thermal performance of the cellulose/PET humidification element showed that the Sherwood number was adequately predicted, whereas the friction factor was ovepredicted, probably due to the simplification of the channel geometry and the neglection of the water film on the element surface.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.2
• /
• pp.93-101
• /
• 2021

Recently, with the urban redevelopment and the spread of the planned cities, there is increasing interest in the wind environment, which is related not only to design of buildings and landscaping but also to the comfortability of pedestrians. Numerical analysis for wind environment prediction is underway in many fields, such as dense areas of high-rise building or composition of the apartment complexes, a precisive 3D building model is essentially required in this process. Many studies conducted for wind environment analysis have typically used the method of creating a 3D model by utilizing the building layer included in the GIS (Geographic Information System) data. These data can easily and quickly observe the flow of atmosphere in a wide urban environment, but cannot be suitable for observing precisive flow of atmosphere, and in particular, the effect of a complicated structure of a single building on the flow of atmosphere cannot be calculated. Recently, drone photogrammetry has shown the advantage of being able to automatically perform building modeling based on a large number of images. In this study, we applied photogrammetry technology using a drone to evaluate the flow of atmosphere around two buildings located close to each other. Two 3D models were made into an automatic modeling technique and manual modeling technique. Auto-modeling technique is using an automatically generates a point cloud through photogrammetry and generating models through interpolation, and manual-modeling technique is a manually operated technique that individually generates 3D models based on point clouds. And then the flow of atmosphere for the two models was compared and analyzed. As a result, the wind environment of the two models showed a clear difference, and the model created by auto-modeling showed faster flow of atmosphere than the model created by manual modeling. Also in the case of the 3D mesh generated by auto-modeling showed the limitation of not proceeding an accurate analysis because the precise 3D shape was not reproduced in the closed area such as the porch of the building or the bridge between buildings.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.497-510
• /
• 2022

Monthly monitoring, 3D scan survey, and electrical resistivity survey were conducted from January 2018 to August 2022 to identify the cause of rockfall occurring in Daljeon-ri Columnar Joint (Natural Monument No. 415), Pohang. A total of 3,231 rocks fell from the columnar joint over the past 5 years, and 1,521 (47%) of the falling rocks were below 20 cm in length, 978 (30.3%) of 20-30 cm, and 732 (22.7%) of rocks over 30 cm. While the number of rockfalls by year has decreased since 2018, the frequency of rockfalls bigger than 30 cm tends to increase. Large-scale rockfalls occurred mainly during the thawing season (March-April) and the rainy season (June-July), and the analysis of the relationship between cumulative rainfall and rockfall occurrence showed that cumulative rainfall for 3 to 4 days is also closely related to the occurrence of rockfall. Smectite and illite, which are expansible clay minerals, were observed in XRD analysis of the slope material (filling minerals) in the columnar joint, and the presence of a fault fracture zone was confirmed in the electrical resistivity survey. In addition, the confirmed fault fracture zone and the maximum erosion point analyzed through 3D precision measurement coincided with the main rockfall occurrence point observed by the BTC-6PXD camera. Therefore, the main cause of rockfall at Daljeon-ri columnar joint in Pohang is a combination of internal factors (development of fault fracture zones and joints, weathering of rocks, presence of expansive clay minerals) and external factors (precipitation, rapid thawing phenomenon), resulting in large-scale rockfall. Meanwhile, it was also confirmed that the Pohang-Gyeongju earthquake, which was continuously raised, was not the main cause.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.532-544
• /
• 2023

Purpose: To identify and evaluate the risk of chemical fire causative substances by using thermal analysis methods (DSC, TGA) for the hazards and physical property changes that occur when newly used biofuels are mixed with existing fuels It is to use it for identification and evaluation of the cause of fire by securing data related to the method and the hazards of the material according to it. Method: The research method used in this experiment is the differential scanning calorimeter (DSC: Difference in heat flux) through quantitative information on the caloric change from the location, shape, number, and area of peaks. flux) was measured, and the weight change caused by decomposition heat at a specific temperature was continuously measured by performing thermogravimetric analyzer (TGA: Thermo- gravimetric Analyzer). Result: First, in the heat flux graph, the boiling point of the material and the intrinsic characteristic value of the material or the energy required for decomposition can be checked. Second, as the content of biodiesel increased, many peaks were identified. Third, it was confirmed through analysis that substances with low expected boiling points were contained. Conclusion: It was shown that the physical risk of the material can be evaluated by using the risk of biodiesel, which is currently used as a new energy source, through various physical and chemical analysis techniques (DSC + TGA).In addition, it is expected that the comparison of differences between test methods and the accumulation and utilization of know-how on experiments in this study will be helpful in future studies on physical properties of hazardous materials and risk assessment of materials.

• Journal of Internet Computing and Services
• /
• v.14 no.1
• /
• pp.23-30
• /
• 2013

Test effort estimated so far is as a by-product of the development effort estimation activity which is based on the FP, UCP, COCOMO model, or calculated data from the project knowledge base which is containing test effort information for the test phase on software development life cycle. In this paper, test effort estimation model and calculating procedures are suggested, which is independent from software development effort estimation model. Generally test efforts is depends on the number and the complexity of test cases, and also maturity of test organization that performs test activities, such as integration test, system test, acceptance test and so on. The estimated results with the suggested test effort estimation model has deviation of 4.7% compare to the corresponding test efforts generated by the development effort estimationprocedures. The suggesting model will be accurate more and more with refinements of coefficients which reflect the technical and environmental maturity level of test organization, and also including the software complexity level of projects.

• Architectural research
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2016

This thesis explores Vitruvius and his impact upon other Renaissance architects who compare a city to a building or a building to a city, who match the city and the building into a human body, and who develop their own works. The objective of this study is to furnish an interpretation of their theory and practice through their literature and designs. In this point of view, this article takes notice of Vitruvius's six concepts coined from venustas and divides them into two parts: i.e. aesthetic quality (ordinatio, dispositio, and distributio) and technical activity (eurythmia, symmetria, and $d{\acute{e}}cor$) each. This thesis indicates that Vitruvius's successive impacts from the concepts bring about concrete design principles through proportional measurements, placing together, and hierarchic values for the former, as well as appropriate use through beautiful look, symmetrical harmony, and appropriate uses for the latter, tracking notions between a city as a house and vice versa, and either the ideas of the house or the city in the synthesis of the human body, which follows the perfect number and module based on the human body. The thesis shows that the representations of architecture and the city take place with the form of a circle and a square that express the religious belief and the cosmos, substantiating the connection between the proportions of the human body and numbers, and ultimately satisfying a concept of centrality, which is slowly extended to the enclosed plaza at the urban level from chambers, atrium, and corridors at the residence level.

• Journal of Educational Research in Mathematics
• /
• v.26 no.2
• /
• pp.309-331
• /
• 2016

Australian Curriculum Assessment and Reporting Authority(ACARA) was founded by Australian federal government in 2009. Leading under ACARA, national education curriculum development was propelled. Also from 2014 they gradually extended enforcement of new curriculum by a Reminder about new syllabus implementation (2013.01.29.). The research result of Australia's curriculum, and textbook shows that students repeat, and advance the same contents under spiral curriculum as they move to higher grade. They actively use digital technology, and also puts emphasis on practical context such as Money & financial mathematics. On the level of difficulty, or quantity aspect, Korea handles relatively advanced contents of 'number and operation' or 'Letters and Algebraic Expressions' domain than Australia. However on statistics domain, Australia not only puts more focus on practical stats than Korea, but also concerns as much on both various and qualitative terms Australia doesn't deal with formal concept of 'function'. However, they learn the wide concept of function by handling various graphs. This shows Australia has a point of similarity, and also difference to Korea on various angles.

• Journal of the Korean Dietetic Association
• /
• v.19 no.3
• /
• pp.209-222
• /
• 2013

This study examined the hygiene practices of contract foodservice employees and investigated the influence of education and work environment on these hygienes practices. A questionnaire was distributed to 250 contract foodservice employees and a total of 232 responses were received and analyzed. The overall score for hygiene practices of contract foodservice employees was 3.89 based on a 5-point scale. Cross-contamination was prominent (highest score at 4.46) and the heating temperature was less prominent (lowest score at 3.49). The factors most affecting contract foodservice employees were their work period, the size of the contract foodservice management company, the number of meals served daily, the frequency of meal service per day and the frequency of hygiene education. Compared to small and medium-sized contract foodservice management companies, the major contract foodservice management companies showed higher scores for refrigerator/freezer control (P<0.001), vegetable/fruit disinfection (P<0.001), thawing (P<0.001), heating temperature (P<0.001), cleaning/disinfection (P<0.01), and personal hygiene (P<0.05). The frequency of hygiene education had a significant effect on the performance levels for refrigerator/freezer control (P<0.001), vegetable/fruit disinfection (P<0.001), thawing (P<0.001), heating temperature (P<0.001), cleaning/disinfection control (P<0.001), food supply control (P<0.05), and personal hygiene (P<0.05). From these results, to increase the sanitation quality of contract foodservice operations, hygiene practice levels need to increase and hygiene education systematically should be enforced for foodservice employees.

• Korea Journal of Hospital Management
• /
• v.22 no.1
• /
• pp.40-50
• /
• 2017

The purpose of this study is to develop the KPIs(Key Performance Indices) needed to improve management and strategy in the dental clinic based on the four perspectives of BSC(Balanced Scorecard). The questionnaire was conducted on 52 dentists approved by Dental Managment Research Committee in Seoul National University as a panel. Using the Delphi technique, the top five KPIs for each point of perspective in BSC were extracted from KPI pools. In the third survey, the top five KPIs of all points were compared with each other through AHP(Analytic Hierarchy Process) method, and priority and overall importance rankings were calculated. The biggest difference in the three level AHP results was the customer perspective took priority to others. In the second survey, the financial perspective, which was number one, was pushed back. The overall significance of KPIs was in the order of customer, internal process, finance, learning and growth perspective, with the exception of medical profits (5th of 20) and new patient growth (10th of 20). We were able to overcome the limitations of the Delphi Technique with the AHP method. In general, the financial perspective in BSC is known to be the most important, but we conclude that the customer perspective is more important through the pairwise comparison survey. In the current dental service market, which is a long-term recession, excessive competition, customer satisfaction and customer relationship management seem to be the first goal to pursue in dental clinic.