• 제목/요약/키워드: National R&D performance

검색결과 1,193건 처리시간 0.031초

ISOLATION, IDENTIFICATION AND CHARACTERIZATION OF AN IMMOBILIZED BACTERIUM PRODUCING N2 FROM NH4+ UNDER AN AEROBIC CONDITION

  • Park, Kyoung-Joo;Cho, Kyoung-Sook;Kim, Jeong-Bo;Lee, Min-Gyu;Lee, Byung-Hun;Hong, Young-Ki;Kim, Joong-Kyun
    • Environmental Engineering Research
    • /
    • 제10권5호
    • /
    • pp.213-226
    • /
    • 2005
  • To treat wastewater efficiently by a one-step process of nitrogen removal, a new bacterial strain producing $N_2$ gas from ${NH_4}^+$ under an aerobic condition was isolated and identified. The cell was motile and a Gram-negative rod, and usually occurred in pairs. By 16S-rDNA analysis, the isolated strain was identified as Enterobacter asburiae with 96% similarity. The isolate showed that the capacity of $N_2$ production under an oxic condition was approximately three times higher than that under an anoxic condition. Thus, the consumption of ${NH_4}^+$ by the isolate was significantly different in the metabolism of $N_2$ production under the two different environmental conditions. The optimal conditions of the immobilized isolate for $N_2$ production were found to be pH 7.0, $30^{\circ}C$ and C/N ratio 5, respectively. Under all the optimum reaction conditions, $N_2$ production by the immobilized isolate resulted in reduction of ORP with both the consumption of DO and the drop of pH. The removal efficiencies of $COD_{Cr}$, and TN were 56.1 and 60.9%, respectively. The removal rates of $COD_{Cr}$, and TN were the highest for the first 2.5 hrs with the removal $COD_{Cr}/TN$ ratios of 32.1, and afterwards the rates decreased as reaction proceeded. For application of the immobilized isolate to a practical process of ammonium removal, a continuous operation was executed with a synthetic medium of a low C/N ratio. The continuous bioreactor system exhibited a satisfactory performance at 12.1 hrs of HRT, in which the effluent concentrations of ${NH_4}^+$-N was measured to be 15.4 mg/L with its removal efficiency of 56.0%. The maximum removal rate of ${NH_4}^+$-N reached 1.6 mg ${NH_4}^+$-N/L/hr at 12.1 hrs of HRT(with N loading rate of $0.08\;Kg-N/m^3$-carrier/d). As a result, the application of the immobilized isolate appears a viable alternative to the nitrification-denitrification processes.

산란계에서 파리 유충의 급여가 계란 품질에 미치는 영향 (Influence of Feeding Dried Fly Larvae on Egg Quality in Laying Hens)

  • 황보종;이병석;홍의철;배해득;강환구;한광희;장애라;박병성
    • 한국가금학회지
    • /
    • 제32권3호
    • /
    • pp.203-209
    • /
    • 2005
  • 본 연구는 산란계에서 파리 유충의 사료 영양학적 가치를 평가하고, 그 활용 가능성을 검토하고자 실시하였다. 43주령 갈색 산란계(ISA Brown) 총 90수를 51주령까지 8주 동안 각 시험사료 처리구(대조구, 파리 유충 2, 5, 10, $15\%$ 첨가 사료)에 임의배치하여 무제한 급여하면서 사료 섭취량, 산란율, 난황색, 난중, 파란 강도, 난각 두께, Haugh unit, 계란 내 지방산 조성 및 콜레스테롤 함량을 조사하였다. 파리 유충 첨가구가 대조구에 비해서 난중이 유의적으로 높았으며(p<0.05), 파란 강도 증가율은 $14\%$ 높게 나타나 유의적인 차이를 보였다.(p<0.05). 계란 지방산 조성은 파리 유충 첨가구가 대조구에 비해서 포화지방산의 함량은 $16\%$까지 감소되었으나, 불포화 지방산의 함량은 $7\%$까지 유의적으로 높게 나타났다(p<0.05). 이 실험 결과 파리유충이 산란계 사료에 첨가되면 계란의 품질은 개선되었지만 난황에서 포화지방산이 증가비율이 높게 나타났다.

배관용 보온재의 난연 성능 시험방법에 따른 최대 발열량 분석 (Analysis of the Maximum Heat Release Rate in Accordance with the Test Method of the Flame Retardant Performance for Pipe Insulation)

  • 유우준;박정욱;신연제;박형규;임옥근
    • 한국화재소방학회논문지
    • /
    • 제34권1호
    • /
    • pp.18-25
    • /
    • 2020
  • 본 연구에서는 보온재의 설치 상태를 고려한 ISO 20632와 NFPA 274 시험 기준에 따른 발열량 산출 결과를 분석하였다. 이를 위해서 보온재 총 6종(은박 발포폴리에틸렌(PE(S)), 무은박 발포폴리에틸렌폼(PE(N)), 고무발포(Rubber), 일본-폴리에틸렌폼(PE(J)), 일본-폴리우레탄폼(PU(J)) 그리고 일본-스티로폼(ST(J)))에 대해서 EN 13501-1과 화재성장곡선에 따른 난연 등급을 구분하였다. 그 결과 PU(J), PE(J) 그리고 PE(N)는 Class E 및 Ultra-fast, NFPA 274 시험기준에 의한 PE(S)는 Class D 및 Fast, ISO 20632에 의한 PE(S)는 Class C 및 Slow, 그리고 Rubber와 ST(J)는 Class B 및 Slow로 나타났다. 하지만, 난연 등급 평가 기준인 최대 발열량에 대한 시간평균 기울기는 시험 방법에 따라서 동일 보온재에 대하여 다르게 나타났으며, 보다 정확한 원인을 분석하기 위한 기초 연구가 필요한 것으로 판단된다.

한우 사육자 작업환경 및 작업복과 보호구 착용 실태 분석 (Research on the Working Environment and Personal Protective Equipment of Korean Native Cattle Raising Farmers)

  • 김인수;이경숙;채혜선;김경수;최동필;김효철
    • 한국지역사회생활과학회지
    • /
    • 제27권4호
    • /
    • pp.891-906
    • /
    • 2016
  • This study examined the working site environment of Korean native cattle raising farmers and their actual condition of wearing personal protective equipment as part of preventing disasters during agricultural work. To this end, 160 Korean cattle raising farmers were surveyed and a site visit was performed on 10 farms. According to an examination of the cattle breeding environment, the major harmful factors were in the following order: fine dust (12.8%), organic feed dust (10.3%), contact with cattle (9.7%), manure (8.2%), germs and viruses (8.1%), harmful gases (7.4), contact with obstacles (6.7), and temperature (6.6%). The current status of the rate of wearing protection was in the order of gloves (20.9%), working hats (19.7%), boots (19.6%), masks (10.9%), protective clothing (8.9%), and specialized working clothing (6.6%). Nevertheless, most Korean cattle raising farmers recognized the risks when they did not wear protective equipment and the need for wearing protectors, but they mostly did not wear personal protective equipment due to a lack of knowledge on the selection of appropriate personal protective equipment and the discomfort they experience when they put on protectors. Even when they put on protective equipment, 38% was inappropriate for the farming work environment. Given the research results, improvements on and the development of specialized working clothing and personal protective equipment to protect farmers from harmful and dangerous materials from the cattle nurturing environment is necessary. Overall, based on the study data, objectified data collection, a determination of the necessary performance elements of personal protective equipment, and R&D will be needed through an on-site current status investigation.

수간곡선식 개발과 국가탄소배출계수를 이용한 졸참나무의 탄소저장량 추정 (Estimation of Carbon Stock by Development of Stem Taper Equation and Carbon Emission Factors for Quercus serrata)

  • 강진택;손영모;전주현;유병오
    • 한국기후변화학회지
    • /
    • 제6권4호
    • /
    • pp.357-366
    • /
    • 2015
  • This study was conducted to estimate carbon stocks of Quercus serrata with drawing volume of trees in each tree height and DBH applying the suitable stem taper equation and tree specific carbon emission factors, using collected growth data from all over the country. Information on distribution area, tree number per hectare, tree volume and volume stocks were obtained from the $5^{th}$ National Forest Inventory (2006~2010), and method provided in IPCC GPG was applied to estimate carbon storage and removals. Performance in predicting stem diameter at a specific point along a stem in Quercus serrata by applying Kozak's model,$d=a_1DBH^{a_2}a_3^{DBH}X^{b_1Z^2+b_2ln(Z+0.001)+b_3{\sqrt{Z}}+b_4e^Z+b_5({\frac{DBH}{H}})}$, which is well known equation in stem taper estimation, was evaluated with validations statistics, Fitness Index, Bias and Standard Error of Bias. Consequently, Kozak's model turned out to be suitable in all validations statistics. Stem volume tables of Quercus serrata were derived by applying Kozak's model and carbon stock tables in each tree height and DBH were developed with country-specific carbon emission factors ($WD=0.65t/m^3$, BEF=1.55, R=0.43) of Quercus serrata. As a result of carbon stock analysis by age class in Quercus serrata, carbon stocks of IV age class (11,358 ha, 36.5%) and V age class (10,432; 33.5%) which take up the largest area in distribution of age class were 957,000 tC and 1,312,000 tC. Total carbon stocks of Quercus serrata were 3,191,000 tC which is 3% compared with total percentage of broad-leaved forest and carbon sequestration per hectare(ha) was 3.8 tC/ha/yr, $13.9tCO_2/ha/yr$, respectively.

Effect of Different Slaughter Weights on Meat Quality, Fatty Acids and Flavor Component of Korean Woori Black Pig Loin and Belly

  • Hoa, Van-Ba;Song, Dong-Heon;Seol, Kuk-Hwan;Kang, Sun-Moon;Kim, Yun-Seok;Min, Ye-Jin;Cho, Soo-Hyun
    • 한국식생활문화학회지
    • /
    • 제36권4호
    • /
    • pp.362-372
    • /
    • 2021
  • The present study was undertaken to investigate the quality characteristics of Korean Woori black pig (KWP) bellies and loins by different slaughter weight (SW) groups. The loin and belly samples collected from KWPs with different body weights (50, 75, 90, 105, and 120 kg) at 24 h post-mortem were used in the present investigation. The samples were analyzed for quality traits, fatty acid profiles, and volatile flavor compounds. Results showed that the fat content of the loin (8.64%) and belly samples (46.78%) was significantly higher in the 120 kg SW group compared to those of other SW groups (p<0.05). However, a lower protein content (12.20-12.67%) was found in the belly cuts of the heavier SW groups (105-120 kg) compared to those of the lighter SW groups (p<0.05). The lowest cooking loss (24.34%) was found in the loin cuts of the 120 kg SW group (p<0.05). Both the loin and belly cuts were observed to be redder in color with increasing SW (p<0.05). Higher oleic acid (C18:1, n9) and total monounsaturated fatty acid content and lower linolenic acid(C18:3, n3) and total polyunsaturated fatty acid content were observed in both cuts of the 120 kg SW group (p<0.05). Out of the flavor compounds identified, 11 and 17 compounds in the loin and belly, respectively, were associated with the SW. An increase in the SW resulted in increased concentrations of C18:1n9- and amino acid-derived flavor compounds. Overall, the meat samples of the heavier SW groups (120 kg) exhibited better quality and higher concentrations of volatile compounds associated with pleasant flavors. However, the meat of the 120 kg SW group also contained a much higher fat level (8.64 and 46.78% in the loin and belly, respectively) that may result in high trimming loss and hence a high rejection risk by consumers.

우리나라 소나무의 수간곡선식 추정에 의한 탄소저장량 및 흡수량 산정 (Assessment of Carbon Stock and Uptake by Estimation of Stem Taper Equation for Pinus densiflora in Korea)

  • 강진택;손영모;전주현;이선정
    • 한국기후변화학회지
    • /
    • 제8권4호
    • /
    • pp.415-424
    • /
    • 2017
  • This study was conducted to estimate carbon stocks of Pinus densiflora with drawing volume of trees in each tree height and DBH applying the suitable stem taper equation and tree specific carbon emission factors, using collected growth data from all over the country. Information on distribution area, tree age, tree number per hectare, tree volume and volume stocks were obtained from the $5^{th}$ National Forest Inventory (2006~2010) and Statistical yearbook of forest (2016), and method provided in IPCC GPG was applied to estimate carbon stock and uptake. Performance in predicting stem diameter at a specific point along a stem in Pinus densiflora by applying Kozak's model, $d=a_{1}DBH^{a_2}a_3^{DBH}X^{b_{1}Z^2+b_2ln(Z+0.001)+b_3\sqrt{Z}+b_4e^z+b_5(\frac{DBH}{H})}$, which is well known equation in stem taper estimation, was evaluated with validations statistics, Fitness Index, Bias and Standard Error of Bias. Consequently, Kozak's model turned out to be suitable in all validations statistics. Stem volume table of P. densiflora was derived by applying Kozak's model and carbon stock tables in each tree height and DBH were developed with country-specific carbon emission factors ($WD=0.445t/m^3$, BEF = 1.445, R = 0.255) of P. densiflora. As the results of analysis in carbon uptake for each province, the values were high with Gangwon-do $9.4tCO_2/ha/yr$, Gyeongsandnam-do and Gyeonggi-do $8.7tCO_2/ha/yr$, Chungcheongnam-do $7.9tCO_2/ha/yr$ and Gyeongsangbuk-do $7.8tCO_2/ha/yr$ in order, and Jeju-do was the lowest with $6.8tC/ha/yr$. Total carbon stocks of P. densiflora were 127,677 thousands tC which is 25.5% compared with total percentage of forest and carbon stock per hectare (ha) was $84.5tC/ha/yr$ and $7.8tCO_2/ha/yr$, respectively.

지역 강소기업의 특성과 기술개발 방법 : 독일 강소기업과의 비교를 중심으로 (Characteristics and Technology Development Mode of Local Hidden Champions in Korea : How are they different?)

  • 허문구
    • 디지털융복합연구
    • /
    • 제13권8호
    • /
    • pp.221-234
    • /
    • 2015
  • 독일의 강소기업에 대한 이해를 바탕으로 국내에서도 중앙정부나 지방자치단체를 중심으로 강소기업 육성을 위해 다양한 정책이 추진되고 있다. 그러나 국내 강소기업은 독일과는 상당히 다른 특성을 가지며, 연구와 정책개발을 위해서는 그 차이에 대한 이해가 선행되어야 할 것이다. 첫째, 전반적 특성과 전략적 행동 및 성과 측면에서 지역의 강소기업은 독일 기업에 비해 업력이 현저히 짧고 특정 분야에의 전문화 정도는 오히려 낮으며, 특히 원가경쟁력과 세계화 등의 측면에서는 약점을 보이는 것으로 나타났다. 둘째, 기술개발 방법에 있어서, 독일의 강소기업은 자체 연구개발을 통한 기술개발과 경쟁력 확보에 초점을 두는 반면, 지역의 성공적 중소기업은 협력적 기술개발, 특히 기술제휴를 적극적으로 활용하는 것으로 나타났다. 이러한 분석을 바탕으로, 연구의 기여와 정책적 시사점에 대해 논의하고, 연구의 한계와 향후 연구방향을 제시하였다.

국도, 고속국도 터널 영상유고감지시스템 성능분석 및 대심도 복층터널 특성반영 방안 (The National Highway, Expressway Tunnel Video Incident Detection System performance analysis and reflect attributes for double deck tunnel in great depth underground space)

  • 김태복
    • 한국정보통신학회논문지
    • /
    • 제20권7호
    • /
    • pp.1325-1334
    • /
    • 2016
  • 영상유고감지시스템은 터널내 보행자, 낙하물, 정지차량, 역주행, 화재(연기) 등 돌발 상황시에 초동감지 목적의 감지시스템으로 최근 도심지의 대심도 지하도로 및 복층터널 등에서 중요성이 부각되고 있다[1] 그러므로 본 논문에서는 영상유고감지시스템을 대심도 복층터널에 적용하는 것의 타당성을 검증하기 위하여 본 시스템이 설치된 국도, 고속국도 터널을 대상으로 장기간 로그데이터 분석을 실시한 내용과 실험 결과를 소개하고, 이를 바탕으로 기존 영상유고감지시스템의 문제점 도출과 개선방안 그리고 일반터널과는 상이한 복층터널 설계에 대한 이해를 통해 복층터널 특성반영 방안에 대하여 몇가지 사항을 제안하였다.

연소관 내열고무의 내열성능평가를 위한 시험장치 개발 (A Development of Test Equipment for Thermal Protection Performance on Insulator used in Rocket Motor Chamber)

  • 강윤구;박종호
    • 한국추진공학회지
    • /
    • 제20권3호
    • /
    • pp.32-36
    • /
    • 2016
  • 고체로켓추진기관 연소관 내열고무의 열반응 특성을 평가하기 위한 모사시험장치를 개발하였다. 시험장치는 연소실 압력 2,500 psi, 연소시간 100 s까지 시험할 수 있으며, 여러 시편을 동시에 상대 비교 할 수 있다. 시편 부는 사각 패널로 되어 있으며, 마주보는 두 면에서는 연소시간 동안 시편 내부의 온도 변화를 측정할 수 있다. 시험장치의 안전성을 확인하기 위하여 연소실 유효평균압력 1,000 psi, 유효연소시간 10 s 시험을 수행하였으며, 내열고무의 열특성 분석에 필요한 기본 데이터들, 즉 연소실의 압력-시간 선도, 재료 내부에서의 온도-시간 선도, 재료의 열파괴 두께를 획득하였다.