• The KSFM Journal of Fluid Machinery
• /
• v.17 no.1
• /
• pp.12-21
• /
• 2014

An organic Rankine cycle was analyzed to work at the optimal operating point when the heat source is fluctuated. R245fa was adopted as a working fluid, and an axial-type turbine as expander on the cycle was designed to convert the heat energy to the electricity since the turbo-type expander works at off-design points better than the positive displacement-type expander. A supersonic nozzle was designed to increase the spouting velocity because a higher spouting velocity can produce more output power. They were designed by the method of characteristics for the operating fluid of R245fa. Three different cases, such as various spouting velocities, various inlet total temperatures, and various nozzle numbers, were studied. From these results, an optimal operating cycle can be designed with the organic Rankine cycle when the available heat source as renewable energy is low-grade temperature and fluctuated.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.39-47
• /
• 2005

Air void systems in hardened concrete has an important influence on concrete durability such as freeze-thaw resistance, water permeability, surface scaling resistance. Linear traverse method and point count method described at ASTM are the routine analysis of the air void system that have been widely used to estimate the spacing factor in hardened concrete. Recently, many concretes often have a spacing factor higher than the generally accepted $200-250{\mu}m$ limit for the usual range of air contents. This study is proposed to estimate the plane spacing factor by calculation of simplicity. The plane spacing factor need two parameters that are air content and numbers of air voids in the hardened concrete. Those obtained from the standard air-void system analysis of the ASTM C 457. The equation is valid for all values of paste-to-air ratio because the estimation of paste content is unnecessary at the using ASTM C 457. The plane spacing factor yields a similar estimate of the standard spacing factor.

• Journal of the military operations research society of Korea
• /
• v.28 no.2
• /
• pp.85-94
• /
• 2002

Calculation of proper expenses on acquisition and purchasing defense product is matter of survival and weighing the morality for both defense industry and the national facilities. With this reason, both parties have been a big job to estimate the resonable cost. The cost are composed of many subordinated parts such as material cost, labor cost, and so on. In the compositions of that cost, the most important part in between companies and the government throughout the whole calculating process is to define the proper labor cost. When both parties calculate imported articles or overhead expenses, they can easily calculate and confirm by documented evidences or related materials. In other hand, the labor cost, which can be seen as two absolutely different numbers and opinions can be created, depends on analyzer's point of view. These interpretation and judgment of data cannot avoid analyzer's intention. In accordance with the above matters, defining the reasonable labor cost will be the top priority in order to analyze the proper expenses. This study will provide a method of proper labor cost estimation before starting the actual manufacturing to calculate the rational labor cost.

• International Journal of Clinical Preventive Dentistry
• /
• v.14 no.4
• /
• pp.209-215
• /
• 2018

In recent years, the numbers of the orthodontic dental patients have been rapidly increased in adolescent or young adult aged generation. It has been well known that it would be very hard to control the oral hygiene cares for orthodontic applied dental patient because of the complexity of the appliance. So the caries prevalence of the orthodontic dental patients would be higher than non-appliance persons, and it might be easy to cause the dental caries especially on the labial or buccal surface of the tooth through equipping the fixed type appliance with a long period, even though the alignment of the teeth would be arranged well. So, the massive preventive program for preventive dentistry should be needed for the dental patients for orthodontic treatment, in order to protect the dental caries and the periodontal disease for them. But, lots of the dentists or dental hygienists sometimes neglect of this point for preventive dental cares orthodontic dental patients, or do not know the importance and how to manage the skill for the preventive dental works in clinical. In this article, it will be introduced the basic theories and skills for preventive cares as tooth-brushing instruction, fluoride topical application and pit and fissure sealant, scaling and professional mechanical tooth cleansing and the diet control, for the dental patients with the fixed type of the orthodontic appliance, in case by case.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.6
• /
• pp.1-12
• /
• 2016

A control algorithm for a 100 kW wind turbine is designed in this study. The wind turbine is operating as a variable speed variable pitch (VSVP) status. Also, this wind turbine is a permanent magnet synchronous generator (PMSG) Type. For the medium capacity wind turbine considered in this study, it was found that the optimum tip speed ratios to achieve the maximum power coefficients varied with wind speeds. Therefore a commercial blade element momentum theory and multi-body dynamics based program was implemented to consider the variation of aerodynamic coefficients with respect to Reynolds numbers and to find out the power and thrust coefficients with respect tip speed ratio and blade pitch angles. In the end a basic power controller was designed for below rated, transition and above rated regions, and a load reduction algorithm was designed to reduce tower vibration by the nacelle motion. As a result, damage equivalent Load (DEL) of tower fore-aft has been reduced by 32%. From dynamic simulations in the commercial program, the controller was found to work properly as designed. Experimental validation of the control algorithm will be done in the future.

• Journal of Biosystems Engineering
• /
• v.35 no.3
• /
• pp.182-188
• /
• 2010

Post-Harvest processing engineering is a field that studies prevention of the quality change of agricultural products during sorting, packaging, storage, and distribution after harvested. In distribution steps, agricultural products could be damaged by physical force, it is the main reason of low quality and they lost value of commodities. This study was performed to find the vibration characteristics of the peach, and to find the extent of the damage on the peach by fatigue stress. The vibration data was obtained on expressway and the vibration characteristics of peach was used to find the damage on the peach. To analyze the vibration characteristics of peach, the resonance frequency and vibration transmissibility were measured. The resonance frequency of the peach was 167.98 Hz and the transmissibility was 4.06 at resonance point. It was 150 ~ 250 Hz that the transmissibility was more than 1. And the transmissibility in simulated test was measured. When the trasmissibility was more than 1, the range was 15 ~ 65 Hz, and when it was less than 1, the range was 65 ~ 175 Hz. When the transmissibility was about 1, the range was 5 ~ 15 Hz. The damage and the vibration cycle numbers of peaches were compared with input frequency and acceleration. More damage and less cycle number happened in 30 Hz than in 62.5 Hz. The reason was that the transmissibility of 30 Hz was higher and the vibration displacement in lower frequency was more. The more acceleration and cycle number increased, the more the bruising volume of peaches increased. The bruising volume ratio for vibration fatigue was measured according to input acceleration and cycle number. Using measured data, regression models for bruising volume ratio(BVR) was developed as a function of the acceleration(A) and cycle number(CN) as follows. BVR = a * $A^b*$ $(CN)^c$

• Korean Journal of Occupational Health Nursing
• /
• v.21 no.3
• /
• pp.247-257
• /
• 2012

Purpose: This study is designed to identify major factors that affect morale among staff of long-term care insurance in National Health Insurance Corporation. Methods: In order to collect the data, a survey was conducted by using the structured questionnaire based on 161 staff members of long-term care insurance of 50 long-term care operation centers, which were randomly selected by the table of random numbers in the whole centers of National Health Insurance Corporation from September 1 to 30, 2011. As for the data analysis, SPSS 18.0 was used to conduct the descriptive statistics, t-test, ANOVA, Pearson correlation coefficient, mutiple regression, and path analysis. Results: The average point of morale was 3.37, and had a negative correlation with the job stress, while it had a positive correlation with the social support, professional identity, and self-efficacy. Job stress, social support, and professional identity have a significant effect on morale among the independent variables. These variables have significant effects on morale, and also have a positive effect on self-efficacy. The findings show that self-efficacy mediates the process of morale. Conclusion: In this study, the factor which influences the morale was identified. It turned out that the morale could be improved by reinforcing the professional identity, managing the health status as well as rotating the working place. As such, it expects both the improvement of long-term care insurance services outcome and its quality through the morale management.

• Korean Journal of Veterinary Pathology
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1997

The cellularity and composition of the spleen lymph node thymus and peripheral blood and tempo of regeneration were studied at various time points after syngeneic bone marrow transplantation(BMT) in C3H/Hen mice. Significant depression of absolute lymphocyte count was noted on week 1 after lethal whole-body irradiation and BMT. In comparison to the lymph node thymus and spleen had an rapid regeneration of cellularity. The distinct cell populations($CD4^+,\;CD8^+,\;CD28^+,\;B220^+) have determined in the lymphoid tissue of mice subjected to irradiation. The relative representation of these subpopulations was significantly different from that in nonirradiated control. $CD4^+\;and\;CD8^+$ cells were present in very low numbers whereas the $B220^+$ cells reached more than normal range at 2 weeks after BMT. The number of $CD4^+$ cells returned to normal relatively soon than $CD8^+$ cell. At week 4 after BMT, the cellularity and composition of spleen lymph node and peripheral blood lymphocyte reached about 50% of the normal range therefore we can choose this time point for the other tests of immune function after BMT.

• Journal of Korean Biological Nursing Science
• /
• v.21 no.1
• /
• pp.85-97
• /
• 2019

Purpose: This study was performed to analyze the levels of blood pressure and to identify good or poor blood pressure control (BPC) groups among hypertension patients. The study was based on the Korea National Health and Nutrition Examination Survey (KNHANES VI and VII) conducted from 2013 to 2016. Methods: The sociodemographic and clinical data of 4,151 Korean hypertension patients aged 20-79 years and who were taking antihypertensive medications was extracted from the KNHANES VI and VII database. Descriptive statistics for complex samples and a decision-tree analysis were performed using the SPSS WIN 24.0 program. Results: The mean age was $62.46{\pm}0.21years$. The mean systolic blood pressure (SBP) was $128.07{\pm}0.28mmHg$, and the diastolic blood pressure (DBP) was $76.99{\pm}0.21mmHg$. 71.9% of participants showed normal blood pressure (SBP < 140mmHg and DBP < 90mmHg). From the decisiontrees analysis, the characteristics of participants related to good BPC group were presented with 9 different pathways same as those from the poor BPC group. Good or poor BPC groups were classified according to the patients' characteristics such as age, living status, occupation, education, hypertension diagnosis period, numbers of comorbidity, perceived health status, total cholesterol, high density lipoprotein-cholesterol, alcohol drinking per month, and depressive mood. Total cholesterol level (< 201mg/dL or ${\geq}201mg/dL$ cutoff point) was the most significant predictor of the participants' BPC group. Conclusion: This decision-tree model with the 18 different pathways can form a basis for the screening of hypertension patients with good or poor BPC in either clinical or community settings.

• Journal of Korean Home Economics Education Association
• /
• v.17 no.4 s.38
• /
• pp.55-71
• /
• 2005

This study attempts to analyze research Quality about home economics and education, based on the studies in the Journal of Korean Home Ecomics Education. The purpose of this study is to investigate the recent studies in hem economics and find out the desirable direction of it. The findings of study are as follow: While the numbers of articles appeared in The Korea Association of Practical Arts Education and Korean Home Economics Education Association are increasing, The Korean Home economics Association does not show the increase the number of articles. According to the historical changes and distribution, the majority was teaching-learning method and teaching materials. Also, from the point of view in research thesis, there were more articles in home economics and education than any others, In addition, among the various types of research, survey was most frequently used. There was significant differences of the sizes of groups according to the different journals, but the one group research was most frequent and one certain research area was dominant. The teams consist of two people showed the highest ratio, and junior high and high school were the most frequently researched institutions. Generally, it is hard to find research grant. Though there is much difference in numbers of references based upon various journals, almost all articles cited reference date not only from Korean articles, but also from international articles.