• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.347-359
• /
• 1996

This study was carried out to find the plant succession stage on highway cut-slopes. In order to analyze succession stage, plant survey with belt transect method was carried out in 1989 and 1995 at Joongbu-highway cut-slopes. The results could be summarized as follows ; The mean plant coverage of cut-slope was 78.3%. Plant coverage of Lower part area was higher than that of upper part area. Pioneer herb species on cut-slope were Miscanthus spp., Arundinella spp., Artemisia spp. etc., and pioneer woody species were Rubus crataegifolius, Robinia pseudoacacia, Pueraria thunbergiana, Pinus spp. etc. Also, among the introduced turf grasses, Eragrostis curvula is the pioneer species. Due to short of maintenance works, Zoysia japonica which has been planted by sodding work was found to decrease or diminish gradually. The ratio of pioneer stage plants, domestic and introduced herb species, seems to decrease, while the ratio of woody species which are advanced stage plants seems to increase. Maintenance works are needed to management and monitoring of plant succession on cut-slope, and use of herb and woody species will be effective.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.2
• /
• pp.1-15
• /
• 2007

A variety of revegetation methods are being utilized and developed. However, most of revegetation methods used on highway slopes in Korea are based on foreign-introduced plant varieties to stabilize road surfaces and to administer afforestation for surface covering at an earlier phase. Therefore. it results in various problems. such as failure to achieve harmony with the surrounding vegetation and 10 cause re-denudation of slopes as the foreign-in introduced plant varieties wane out from 2~3 years after hydro-seeding, etc. In addition, some of the revegetation plants seeded in the earlier phase grow excessively high, thus causes successional problems, such as to inhibit the invasion of the secondary vegetation from the surrounding areas, etc. Therefore, in this study, 160 slopes located in the nationwide express highways have been investigated and analyzed in order to produce basic data for restoration of ecological environment in slopes created on a long-term basis by investigating and analyzing locational characteristics of cut and filled slopes in express highways, status of revegetation methods, characteristics of soil and plant-ecological environment. 1. Investigation on cut and embanked slopes in express highways was carried out in the total of 160 locations, which include 108 cut slopes and 52 embanked slopes. As a whole, the most frequently used revegetation method was seed spray, which was found to be used in the total of 55 target slops investigated. 2. Planting method of Wistaria floribunda applied to some of the blasted rock zones was found to cause damages as Wistaria floribunda trailed up the surrounding vegetation and the secondary invaded trees. In order to prevent this, this method must be used only in the lowest parts of large-sized slopes. Also, it will be required to administer continuous management and maintenance in the areas already planted with this plants. 3. The areas of blasted rock and ripping rock slopes were applied with coir net (net + seeding) method. However, many of these areas failed in achieving ground covering. Most areas where revegetation was in progress, they were covered with Eragrostis curvula(Weeping lovegrass) only. In areas with soil, such as decomposition of granite, where afforestation is difficult. In this slopes, soil base must be improved by hrdroseeding with thin-layer vegetation base application methods in order to achieve success in afforestation with native plants. 4. Woody species, rather than herb species, are more helpful in stabilization of slope surfaces. Therefore, it is important to be able to grow and protect woody species on highway slopes. Growth of woody vegetation is most largely influenced by soil depth. Thus, when hydro-seeding woody plants, it is recommended to apply at the upper layer of the slopes, which is capable to sufficiently provide the fundamentals required in plant growth.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.294-299
• /
• 2006

The Ministry of Environment in Korea has introduced Total Pollution Load Management System (TPLMS) in major 4 large rivers to protect the water quality from possible pollutants. In order to successfully achieve the TPLMS, the nonpoint source should be controled by applying the best management practices in highly polluted areas. Of the various nonpoint sources, the highways are stormwater intensive landuses because of its high imperviousness and high pollutant mass emissions. The EMC (Event Mean Concentration) is an important parameter to correctly determine the pollutant mass loadings from nonpoint sources. However, it has wide ranges because of various reasons such as first flush phenomenon, rainfall and watershed characteristics. Even though the EMC is closely related to the first flush phenomenon, the relationship have not proven until present. Therefore, in this paper, the dynamic EMC method will be introduced to clearly make the relationship between EMC and first flush phenomenon. Also by applying the dynamic EMC method to monitored data, we found that the highly concentrated stormwater runoff was washed off within 20~50 minutes storm duration. The first flush criteria for economical treatment was also determined to 5~10 mm (mean=7.4 mm) as a cumulative rainfall.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.879-885
• /
• 2018

The highway weaving section is a point where there is a conflict caused by entry and exit vehicles. In order to minimize the impact on the main line, an accumulation line should be installed. The design speed of the collecting part is 50 km/h, but the actual driver does not have proper deceleration according to the design speed. In this study, considering the driving behaviors, the design specification, and the driver 's viewing angle, the appropriate separation distance for safe entry and exit of collecting, connecting, and collecting roads was examined. As a result of the analysis, it is found that a distance of 60m is required from the point where the merging starts. The results of this study are expected to contribute to the improvement of driver safety due to the conflict between entry and exit vehicles when applied to the weaving section where collecting roads are installed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.1
• /
• pp.24-34
• /
• 2013

This paper introduces the study of hood-type wind turbine embedded on highway median strip. Recently, many studies are being made to apply to small wind turbine in city. This study is wind turbine producing electricity generated from the wind by running cars. In order to analyze wind generated by running cars, we measured experiments using running cars and buses. Also, using CFD and interpreter program, we analysis wind turbines performance and applied to the twist-sabonius blade. This wind turbine attached to safety lamp on the road is produced to use electricity generated through the wind tunnel experiment. In this paper results, this wind turbine system is expected to produce the power source installed the heat ray and safety lamps on the road.

• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.53-61
• /
• 2001

This study shows that a functional order relationship of national highways in rural areas, which provides the functional system as a principal and minor arterial highways, can be established by the use of statististics. As a result, the adequate functional design criteria of those highways are proposed on the basis of the traffic characteristics in those areas. According to those statistical studies, a function of national highways in the national road network is proved to form three categories broadly. Especially, the survey results based on the traffic characteristics on each road sections show that the initially constructed national highways can not provide an adequate functional role as the arterial highways in the studied areas. In order to operate the intended national highways functionally as the arterial highways, the functional design criteria of highways and the standard order of highway facilities based on the design traffic speed should be considered as an alternative.

• 한국도로학회:학술대회논문집
• /
• 2009.11a
• /
• pp.435-440
• /
• 2009

• Proceedings of the KOR-KST Conference
• /
• 2007.11a
• /
• pp.773-779
• /
• 2007

• Proceedings of the KOR-KST Conference
• /
• 2007.11a
• /
• pp.780-789
• /
• 2007

• 한국ITS학회:학술대회논문집
• /
• v.2006 no.10
• /
• pp.118-122
• /
• 2006